Welcome to the EGGhead Forum - a great place to visit and packed with tips and EGGspert advice! You can also join the conversation and get more information and amazing kamado recipes by following Big Green Egg to Experience our World of Flavor™ at:
Facebook  |  Twitter  |  Instagram  |  Pinterest  |  Youtube  |  Vimeo
Share your photos by tagging us and using the hashtag #BigGreenEgg.

Want to see how the EGG is made? Click to Watch

OT - What are you doing right now?

1…22502251225322552256…3024

Comments

  • fishlessman
    fishlessman Posts: 34,573
    flattened out my first sharpening stone on two sides, its as hard if not harder than my black surgical. (bought this out of an old barn fifty years ago, thinking its atleast 150) had to use a diamond stone on it.  @sgh, do they have translucent brown stones, its harder than i can imagine a farmer having and it looks like the stone was worked on the blade, not the blade on the stone. also maybe my first wood working project, oh the talent



    fukahwee maine

    you can lead a fish to water but you can not make him drink it
    · Share on FacebookShare on Twitter
  • SGH
    SGH Posts: 28,988
    @fishlessman
    I am not an expert on the subject but I have did a lot of reading and research through the years on novaculite stones. Also I collected many of them. 
    At one time when novaculite was abundant, there was a grade called “true hard”. It’s hardness was on par with translucent. However it came in several colors and combinations of colors. 
    Looking at the picture and hearing your evaluation of the stone I would say that it is one of the stones classed as a “true hard”. Also it’s age fits. Along with washita, true hard was rarer than the other grades. Also in the mid 80’s you began seeing fewer and fewer of both of these stones as more and more novaculite was mined away. 
    Again, based on its age, color and hardness I would say it’s probably a true hard. And either a Pike or a Noton/Pike. 

    Location- Just "this side" of Biloxi, Ms.

    Status- Standing by.

    The greatest barrier against all wisdom, the stronghold against knowledge itself, is the single thought, in ones mind, that they already have it all figured out. 

    · Share on FacebookShare on Twitter
  • fishlessman
    fishlessman Posts: 34,573
    SGH said:
    @fishlessman
    I am not an expert on the subject but I have did a lot of reading and research through the years on novaculite stones. Also I collected many of them. 
    At one time when novaculite was abundant, there was a grade called “true hard”. It’s hardness was on par with translucent. However it came in several colors and combinations of colors. 
    Looking at the picture and hearing your evaluation of the stone I would say that it is one of the stones classed as a “true hard”. Also it’s age fits. Along with washita, true hard was rarer than the other grades. Also in the mid 80’s you began seeing fewer and fewer of both of these stones as more and more novaculite was mined away. 
    Again, based on its age, color and hardness I would say it’s probably a true hard. And either a Pike or a Noton/Pike. 


    good to know,  it was hard enough to flatten out some defects on a dmt diamond fine. maybe 3 hours worth of time. i should do one more side and maybe leave the forth somewhat rough
    fukahwee maine

    you can lead a fish to water but you can not make him drink it
    · Share on FacebookShare on Twitter
  • Foghorn
    Foghorn Posts: 10,226
    WeberWho said:
    Tractor pull, 312 turkeys in the park, and a full belly this past weekend. 
    Wow @WeberWho.  How many people does 312 turkeys feed?

    XXL BGE, Karebecue, Klose BYC, Chargiller Akorn Kamado, Weber Smokey Mountain, Grand Turbo gasser, Weber Smoky Joe, and the wheelbarrow that my grandfather used to cook steaks from his cattle

    San Antonio, TX

    · Share on FacebookShare on Twitter
  • nolaegghead
    nolaegghead Posts: 42,109
    fishlessman said:
    SGH said:
    @fishlessman
    I am not an expert on the subject but I have did a lot of reading and research through the years on novaculite stones. Also I collected many of them. 
    At one time when novaculite was abundant, there was a grade called “true hard”. It’s hardness was on par with translucent. However it came in several colors and combinations of colors. 
    Looking at the picture and hearing your evaluation of the stone I would say that it is one of the stones classed as a “true hard”. Also it’s age fits. Along with washita, true hard was rarer than the other grades. Also in the mid 80’s you began seeing fewer and fewer of both of these stones as more and more novaculite was mined away. 
    Again, based on its age, color and hardness I would say it’s probably a true hard. And either a Pike or a Noton/Pike. 


    good to know,  it was hard enough to flatten out some defects on a dmt diamond fine. maybe 3 hours worth of time. i should do one more side and maybe leave the forth somewhat rough
    diamond bit in a surface mill should do it.

    ______________________________________________
    I love lamp..
    · Share on FacebookShare on Twitter
  • SGH
    SGH Posts: 28,988
    edited June 2021
    @fishlessman
    This is just a shot in the dark. Do you have any original Pike “Lily White” stones in your collection? I will pay a fair amount for one in 80% condition or better. 
    I’m not looking for the later washita Norton stones as I have a few of those. I’m looking for the Lily Whites that was stamped Pike. Preferably a 8x2. 

    Location- Just "this side" of Biloxi, Ms.

    Status- Standing by.

    The greatest barrier against all wisdom, the stronghold against knowledge itself, is the single thought, in ones mind, that they already have it all figured out. 

    · Share on FacebookShare on Twitter
  • fishlessman
    fishlessman Posts: 34,573
    nolaegghead said:
    fishlessman said:
    SGH said:
    @fishlessman
    I am not an expert on the subject but I have did a lot of reading and research through the years on novaculite stones. Also I collected many of them. 
    At one time when novaculite was abundant, there was a grade called “true hard”. It’s hardness was on par with translucent. However it came in several colors and combinations of colors. 
    Looking at the picture and hearing your evaluation of the stone I would say that it is one of the stones classed as a “true hard”. Also it’s age fits. Along with washita, true hard was rarer than the other grades. Also in the mid 80’s you began seeing fewer and fewer of both of these stones as more and more novaculite was mined away. 
    Again, based on its age, color and hardness I would say it’s probably a true hard. And either a Pike or a Noton/Pike. 


    good to know,  it was hard enough to flatten out some defects on a dmt diamond fine. maybe 3 hours worth of time. i should do one more side and maybe leave the forth somewhat rough
    diamond bit in a surface mill should do it.


    i went to look at some big millers in a graphite place once, you should see the damage that causes to the machines, betting a sharpening stone would not be good. i dont even like the belt sanders mixed in with the maching area.
    fukahwee maine

    you can lead a fish to water but you can not make him drink it
    · Share on FacebookShare on Twitter
  • Foghorn
    Foghorn Posts: 10,226
    WeberWho said:
    Foghorn said:
    WeberWho said:
    Tractor pull, 312 turkeys in the park, and a full belly this past weekend. 
    Wow @WeberWho.  How many people does 312 turkeys feed?
    @Foghorn


    Rumor had it that there was over 3,000 this year. (The town itself has a population of a little over 200 people) 
    That is awesome.

    XXL BGE, Karebecue, Klose BYC, Chargiller Akorn Kamado, Weber Smokey Mountain, Grand Turbo gasser, Weber Smoky Joe, and the wheelbarrow that my grandfather used to cook steaks from his cattle

    San Antonio, TX

    · Share on FacebookShare on Twitter
  • fishlessman
    fishlessman Posts: 34,573
    SGH said:
    @fishlessman
    This is just a shot in the dark. Do you have any original Pike “Lily White” stones in your collection? I will pay a fair amount for one in 80% condition or better. 
    I’m not looking for the later washita Norton stones as I have a few of those. I’m looking for the Lily Whites that was stamped Pike. Preferably a 8x2. 

    SGH said:
    @fishlessman
    This is just a shot in the dark. Do you have any original Pike “Lily White” stones in your collection? I will pay a fair amount for one in 80% condition or better. 
    I’m not looking for the later washita Norton stones as I have a few of those. I’m looking for the Lily Whites that was stamped Pike. Preferably a 8x2. 

    this is my only stone that dates back that far. i think you may be right with it being a pike or a norton /pike stone as i bought it in new hampshire and pike was in nh and norton in mass. some of the pikes were used for scythe blades and the stone was/is hollowed like it was used that way
    fukahwee maine

    you can lead a fish to water but you can not make him drink it
    · Share on FacebookShare on Twitter
  • nolaegghead
    nolaegghead Posts: 42,109
    fishlessman said:
    nolaegghead said:
    fishlessman said:
    SGH said:
    @fishlessman
    I am not an expert on the subject but I have did a lot of reading and research through the years on novaculite stones. Also I collected many of them. 
    At one time when novaculite was abundant, there was a grade called “true hard”. It’s hardness was on par with translucent. However it came in several colors and combinations of colors. 
    Looking at the picture and hearing your evaluation of the stone I would say that it is one of the stones classed as a “true hard”. Also it’s age fits. Along with washita, true hard was rarer than the other grades. Also in the mid 80’s you began seeing fewer and fewer of both of these stones as more and more novaculite was mined away. 
    Again, based on its age, color and hardness I would say it’s probably a true hard. And either a Pike or a Noton/Pike. 


    good to know,  it was hard enough to flatten out some defects on a dmt diamond fine. maybe 3 hours worth of time. i should do one more side and maybe leave the forth somewhat rough
    diamond bit in a surface mill should do it.


    i went to look at some big millers in a graphite place once, you should see the damage that causes to the machines, betting a sharpening stone would not be good. i dont even like the belt sanders mixed in with the maching area.
    Yeah, probably not a good idea to listen to idiots on a food forum concerning expensive machinery.

    I don't know why I didn't think of it, but a diamond disk on a rotary buffer would flatten that stone in no time.  I have a couple water lubricated rotary diamond tools, I'll try it out if I ever have the need.

    My wet wheel has a diamond truing attachment that cuts a square edge on the wheel in no time.  I use it sparingly as it cuts the wheel diameter down each time you use it.

    ______________________________________________
    I love lamp..
    · Share on FacebookShare on Twitter
  • fishlessman
    fishlessman Posts: 34,573
    nolaegghead said:
    fishlessman said:
    nolaegghead said:
    fishlessman said:
    SGH said:
    @fishlessman
    I am not an expert on the subject but I have did a lot of reading and research through the years on novaculite stones. Also I collected many of them. 
    At one time when novaculite was abundant, there was a grade called “true hard”. It’s hardness was on par with translucent. However it came in several colors and combinations of colors. 
    Looking at the picture and hearing your evaluation of the stone I would say that it is one of the stones classed as a “true hard”. Also it’s age fits. Along with washita, true hard was rarer than the other grades. Also in the mid 80’s you began seeing fewer and fewer of both of these stones as more and more novaculite was mined away. 
    Again, based on its age, color and hardness I would say it’s probably a true hard. And either a Pike or a Noton/Pike. 


    good to know,  it was hard enough to flatten out some defects on a dmt diamond fine. maybe 3 hours worth of time. i should do one more side and maybe leave the forth somewhat rough
    diamond bit in a surface mill should do it.


    i went to look at some big millers in a graphite place once, you should see the damage that causes to the machines, betting a sharpening stone would not be good. i dont even like the belt sanders mixed in with the maching area.
    Yeah, probably not a good idea to listen to idiots on a food forum concerning expensive machinery.

    I don't know why I didn't think of it, but a diamond disk on a rotary buffer would flatten that stone in no time.  I have a couple water lubricated rotary diamond tools, I'll try it out if I ever have the need.

    My wet wheel has a diamond truing attachment that cuts a square edge on the wheel in no time.  I use it sparingly as it cuts the wheel diameter down each time you use it.


    the graphite place had 2 inch drill bits that looked like carrots and enough graphite dust that the front desk receptionist looked to be playing back face. what a mess
    fukahwee maine

    you can lead a fish to water but you can not make him drink it
    · Share on FacebookShare on Twitter
  • hoosier_egger
    hoosier_egger Posts: 6,808
    Farm house for sale down the road. 2000 sq ft and most of the 113 acres floods. Listed at 1 million doll hairs….. 🧐
    ~ John - Formerly known as ColtsFan  - https://www.instagram.com/hoosier_egger
    XL BGE, LG BGE, Med BGE, BGE Chiminea, Ardore Pizza Oven
    Bloomington, IN - Hoo Hoo Hoo Hoosiers!

    · Share on FacebookShare on Twitter
  • alaskanassasin
    alaskanassasin Posts: 8,914
    10k a acre is a bit high around here but it’s around 9 right now
    South of Columbus, Ohio.


    · Share on FacebookShare on Twitter
  • hoosier_egger
    hoosier_egger Posts: 6,808
    alaskanassasin said:
    10k a acre is a bit high around here but it’s around 9 right now
    The fields haven’t had crops for years. It’s a guaranteed crop insurance claim. Floods every year
    ~ John - Formerly known as ColtsFan  - https://www.instagram.com/hoosier_egger
    XL BGE, LG BGE, Med BGE, BGE Chiminea, Ardore Pizza Oven
    Bloomington, IN - Hoo Hoo Hoo Hoosiers!

    · Share on FacebookShare on Twitter
  • Gulfcoastguy
    Gulfcoastguy Posts: 7,328
    Well this evening I was charging the car during a rain deluge. Got to within 4 minutes of done and some kid pulled a Porsche Taycan and hooked up to the adjacent charger. No pics, it was raining that hard.
    · Share on FacebookShare on Twitter
  • ColbyLang
    ColbyLang Posts: 4,387


    Sipping with my neighbor 
    · Share on FacebookShare on Twitter
  • Eoin
    Eoin Posts: 4,304
    alaskanassasin said:
    10k a acre is a bit high around here but it’s around 9 right now
    Good agricultural land is £10k an acre here, so $14k. Being in agriculture has tax advantages, especially inheritance tax, so land has become a place for rich people to park their money.
    · Share on FacebookShare on Twitter
  • Battleborn
    Battleborn Posts: 3,693
    Looks like we have a nice cold front moving in over the next couple days. 


    Las Vegas, NV


    · Share on FacebookShare on Twitter
  • ColbyLang
    ColbyLang Posts: 4,387
    Battleborn said:
    Looks like we have a nice cold front moving in over the next couple days. 


    At least it’s a dry heat……
    · Share on FacebookShare on Twitter
  • fishlessman
    fishlessman Posts: 34,573
    Battleborn said:
    Looks like we have a nice cold front moving in over the next couple days. 



    if you subbed the night time temps for the day time temps, thats still too hot for me
    fukahwee maine

    you can lead a fish to water but you can not make him drink it
    · Share on FacebookShare on Twitter
  • Battleborn
    Battleborn Posts: 3,693
    ColbyLang said:
    Battleborn said:
    Looks like we have a nice cold front moving in over the next couple days. 


    At least it’s a dry heat……
    Ha! Not so dry when it’s 118 and you’re wearing a vest with a wool uniform. 

    fishlessman said:
    Battleborn said:
    Looks like we have a nice cold front moving in over the next couple days. 



    if you subbed the night time temps for the day time temps, thats still too hot for me
    June, July and August are the only months I wished I was still working Graveyard. That 100 degrees hits different when there is no sun to go along with the heat. 
    Las Vegas, NV


    · Share on FacebookShare on Twitter
  • Battleborn
    Battleborn Posts: 3,693
    nolaegghead said:
    Lt Dangle has the right idea
    Reno 91139 Watch the unaired pilot EWcom

    If only I lived in that cesspool of Reno. 
    Las Vegas, NV


    · Share on FacebookShare on Twitter
  • ColbyLang
    ColbyLang Posts: 4,387
    @Battleborn, it’s amazing that after all these years, officers still wear wool/poly uniforms instead of tech fabrics. I can’t imagine wearing that with a vest as well. I work near 10 ovens the size of a large SUV cranking at 425° all day if it helps you any
    · Share on FacebookShare on Twitter
  • SGH
    SGH Posts: 28,988
    Having some soft shells. 


    Location- Just "this side" of Biloxi, Ms.

    Status- Standing by.

    The greatest barrier against all wisdom, the stronghold against knowledge itself, is the single thought, in ones mind, that they already have it all figured out. 

    · Share on FacebookShare on Twitter
  • JohnInCarolina
    JohnInCarolina Posts: 34,691
    SGH said:
    Having some soft shells. 


    Love those.  Anything fried with its entire anus intact is surely a delicacy.
    "I've made a note never to piss you two off." - Stike

    "The truth is, these are not very bright guys, and things got out of hand." - Deep Throat
    · Share on FacebookShare on Twitter
  • SGH
    SGH Posts: 28,988
    JohnInCarolina said:
    Anything fried with its entire anus intact is surely a delicacy.
    After 10 years we finally agree on something  ;)

    Location- Just "this side" of Biloxi, Ms.

    Status- Standing by.

    The greatest barrier against all wisdom, the stronghold against knowledge itself, is the single thought, in ones mind, that they already have it all figured out. 

    · Share on FacebookShare on Twitter

Categories