What Are You Buying Right Now? (non-OT version)

Ozzie_Isaac

lousubcap said:

@MasterC - when you can find them with decent marbling (like you did) they cook up quite well.  Brisket on a stick right there. 

Idiot proof brisket.  I can consistently make these tasty.  I have yet to make a brisket I like.

lousubcap

Just pulled the trigger on the below UPS:

APC UPS Battery Backup and Surge Protector, 850VA Backup Battery Power Supply, BE850G2 Back-UPS with (2) USB Charger Ports https://a.co/d/3eUDNpU

TechsasJim

Rutland gasket.  

Thank you @RRP , what a great individual to do business with!

FrostyEgg

TechsasJim said:

Rutland gasket.  

Thank you @RRP , what a great individual to do business with!

The install process isn't bad at all. Just Follow Ron's instructions and take your time. Mine turned out great!

ColtsFan

Meta Quest 2

 

TEXASBGE2018

This

And 4 of these

TechsasJim

TEXASBGE2018 said:

This

And 4 of these

Awesome, can’t wait to see how this progresses!

GrateEggspectations

FrostyEgg said:

TechsasJim said:

Rutland gasket.  

Thank you @RRP , what a great individual to do business with!

The install process isn't bad at all. Just Follow Ron's instructions and take your time. Mine turned out great!

@TechsasJim Remember to go easy on the à Permatex! Can easily spill out the sides if left unchecked. 

RRP

GrateEggspectations said:

FrostyEgg said:

TechsasJim said:

Rutland gasket.  

Thank you @RRP , what a great individual to do business with!

The install process isn't bad at all. Just Follow Ron's instructions and take your time. Mine turned out great!

@TechsasJim Remember to go easy on the à Permatex! Can easily spill out the sides if left unchecked. 

Or - just be patient and get the APPLICATION part of the job done even if it takes 30 or 45 minutes! After all...this gasket should last you for many years when done properly! So WHY be impatient, pal?

As for "spilling out the side then JUST DON'T try to clean it off then!!!! After it has cured the 24 hours then the clean up is easier!

FrostyEgg

@TEXASBGE2018 what are those wheels going on? There's a new Tahoe in my neighborhood with a flat black wrap and copper wheels like that. It's gorgeous.

Ozzie_Isaac

RRP said:

GrateEggspectations said:

FrostyEgg said:

TechsasJim said:

Rutland gasket.  

Thank you @RRP , what a great individual to do business with!

The install process isn't bad at all. Just Follow Ron's instructions and take your time. Mine turned out great!

@TechsasJim Remember to go easy on the à Permatex! Can easily spill out the sides if left unchecked. 

Or - just be patient and get the APPLICATION part of the job done even if it takes 30 or 45 minutes! After all...this gasket should last you for many years when done properly! So WHY be impatient, pal?

As for "spilling out the side then JUST DON'T try to clean it off then!!!! After it has cured the 24 hours then the clean up is easier!

I love your use of CAPS, !!!, and all the other fun stylistic choices.  Your posts always come across as very animated and I picture you waving your hands while you exasperatedly yell at us! 🤣😎

Ozzie_Isaac

Ozzie_Isaac said:

RRP said:

GrateEggspectations said:

FrostyEgg said:

TechsasJim said:

Rutland gasket.  

Thank you @RRP , what a great individual to do business with!

The install process isn't bad at all. Just Follow Ron's instructions and take your time. Mine turned out great!

@TechsasJim Remember to go easy on the à Permatex! Can easily spill out the sides if left unchecked. 

Or - just be patient and get the APPLICATION part of the job done even if it takes 30 or 45 minutes! After all...this gasket should last you for many years when done properly! So WHY be impatient, pal?

As for "spilling out the side then JUST DON'T try to clean it off then!!!! After it has cured the 24 hours then the clean up is easier!

I love your use of CAPS, !!!, and all the other fun stylistic choices.  Your posts always come across as very animated and I picture you waving your hands while you exasperatedly yell at us! 🤣😎

Uh oh @RRP looks like the the BDPCB found us and are disliking my posts.

TechsasJim

Ozzie_Isaac said:

Ozzie_Isaac said:

RRP said:

GrateEggspectations said:

FrostyEgg said:

TechsasJim said:

Rutland gasket.  

Thank you @RRP , what a great individual to do business with!

The install process isn't bad at all. Just Follow Ron's instructions and take your time. Mine turned out great!

@TechsasJim Remember to go easy on the à Permatex! Can easily spill out the sides if left unchecked. 

Or - just be patient and get the APPLICATION part of the job done even if it takes 30 or 45 minutes! After all...this gasket should last you for many years when done properly! So WHY be impatient, pal?

As for "spilling out the side then JUST DON'T try to clean it off then!!!! After it has cured the 24 hours then the clean up is easier!

I love your use of CAPS, !!!, and all the other fun stylistic choices.  Your posts always come across as very animated and I picture you waving your hands while you exasperatedly yell at us! 🤣😎

Uh oh @RRP looks like the the BDPCB found us and are disliking my posts.

lmao, for the first time ever I had a post disliked b/c I mentioned @RRP

Guess there really are trolls out there, I thought my Norwegian heritage just made trolls myths...

Canugghead

Ozzie_Isaac said:

Ozzie_Isaac said:

RRP said:

GrateEggspectations said:

FrostyEgg said:

TechsasJim said:

Rutland gasket.  

Thank you @RRP , what a great individual to do business with!

The install process isn't bad at all. Just Follow Ron's instructions and take your time. Mine turned out great!

@TechsasJim Remember to go easy on the à Permatex! Can easily spill out the sides if left unchecked. 

Or - just be patient and get the APPLICATION part of the job done even if it takes 30 or 45 minutes! After all...this gasket should last you for many years when done properly! So WHY be impatient, pal?

As for "spilling out the side then JUST DON'T try to clean it off then!!!! After it has cured the 24 hours then the clean up is easier!

I love your use of CAPS, !!!, and all the other fun stylistic choices.  Your posts always come across as very animated and I picture you waving your hands while you exasperatedly yell at us! 🤣😎

Uh oh @RRP looks like the the BDPCB BDPLPCB found us and are disliking my posts.

FTFY ^^^

Ozzie_Isaac said:

Canugghead said:

Thanks @lousubcap hopefully they come out decent since I may have used up my luck already. Wow, the Dislikowart jumped on it instantly!

Edit: I meant the Dislikowart crawled below it.

I am proud to be a member of the club hated on by basements dwelling putin loving pinko commie bastards.  (BDPLPCB).  It is a good group of folks.

nolaegghead

If you’re not getting troll flagged by BDPLPCB, you’re probably on the wrong side of history.  🧐😹😹

TEXASBGE2018

FrostyEgg said:

@TEXASBGE2018 what are those wheels going on? There's a new Tahoe in my neighborhood with a flat black wrap and copper wheels like that. It's gorgeous.

My White GX460. Terrible photoshop job but you get the idea.

FrostyEgg

TEXASBGE2018 said:

FrostyEgg said:

@TEXASBGE2018 what are those wheels going on? There's a new Tahoe in my neighborhood with a flat black wrap and copper wheels like that. It's gorgeous.

My White GX460. 

Had to look that one up, that'll look fantastic!

HeavyG

TEXASBGE2018 said:

FrostyEgg said:

@TEXASBGE2018 what are those wheels going on? There's a new Tahoe in my neighborhood with a flat black wrap and copper wheels like that. It's gorgeous.

My White GX460. Terrible photoshop job but you get the idea.

How much weight you planning on carrying up top?

alaskanassasin

👍

JohnnyTarheel

TEXASBGE2018 said:

FrostyEgg said:

@TEXASBGE2018 what are those wheels going on? There's a new Tahoe in my neighborhood with a flat black wrap and copper wheels like that. It's gorgeous.

My White GX460. Terrible photoshop job but you get the idea.

I can see that bass boat behind it right now...

ColbyLang

JohnnyTarheel said:

TEXASBGE2018 said:

FrostyEgg said:

@TEXASBGE2018 what are those wheels going on? There's a new Tahoe in my neighborhood with a flat black wrap and copper wheels like that. It's gorgeous.

My White GX460. Terrible photoshop job but you get the idea.

I can see that bass boat behind it right now...

Rims on the boat trailer gotta match the Lexus. Same Thing for the paint job

TEXASBGE2018

HeavyG said:

TEXASBGE2018 said:

FrostyEgg said:

@TEXASBGE2018 what are those wheels going on? There's a new Tahoe in my neighborhood with a flat black wrap and copper wheels like that. It's gorgeous.

My White GX460. Terrible photoshop job but you get the idea.

How much weight you planning on carrying up top?

Not much. No plans for a roof top tent or anything but probably an awning. Other than that it will be used to haul camping gear, or the occasional Costco Christmas Tree.

JohnInCarolina

HeavyG said:

TEXASBGE2018 said:

FrostyEgg said:

@TEXASBGE2018 what are those wheels going on? There's a new Tahoe in my neighborhood with a flat black wrap and copper wheels like that. It's gorgeous.

My White GX460. Terrible photoshop job but you get the idea.

How much weight you planning on carrying up top?

What’s your average mother in law weigh?

kl8ton

JohnInCarolina said:

HeavyG said:

TEXASBGE2018 said:

FrostyEgg said:

@TEXASBGE2018 what are those wheels going on? There's a new Tahoe in my neighborhood with a flat black wrap and copper wheels like that. It's gorgeous.

My White GX460. Terrible photoshop job but you get the idea.

How much weight you planning on carrying up top?

What’s your average mother in law weigh?

North or South of the Mason Dixon?

Ozzie_Isaac

JohnInCarolina said:

HeavyG said:

TEXASBGE2018 said:

FrostyEgg said:

@TEXASBGE2018 what are those wheels going on? There's a new Tahoe in my neighborhood with a flat black wrap and copper wheels like that. It's gorgeous.

My White GX460. Terrible photoshop job but you get the idea.

How much weight you planning on carrying up top?

What’s your average mother in law weigh?

According to South Park, about 320lbs (150 kg).

https://southpark.cc.com/video-clips/7d5cfo/south-park-the-weigh-in

dbCooper

alaskanassasin said:

👍

@alaskanassasin - Nice.  Is that your new field car?  🙂

alaskanassasin

Thanks @dbCooper, swmbo drove it through corn stalks last year and I about lost it. lol  I bought it in fall of 2021 as a place holder until Broncos are readily available, though the 4 runner has won me over, other than being gutless. Right now it has maintained its value with 16,000 miles.  I was just looking at a 2020 Platinum 150 magma red.. I must be getting old.

kl8ton

alaskanassasin said:

Thanks @dbCooper, swmbo drove it through corn stalks last year and I about lost it. lol  I bought it in fall of 2021 as a place holder until Broncos are readily available, though the 4 runner has won me over, other than being gutless. Right now it has maintained its value with 16,000 miles.  I was just looking at a 2020 Platinum 150 magma red.. I must be getting old.

Make sure you get the bed rug installed.

alaskanassasin

kl8ton said:

alaskanassasin said:

Thanks @dbCooper, swmbo drove it through corn stalks last year and I about lost it. lol  I bought it in fall of 2021 as a place holder until Broncos are readily available, though the 4 runner has won me over, other than being gutless. Right now it has maintained its value with 16,000 miles.  I was just looking at a 2020 Platinum 150 magma red.. I must be getting old.

Make sure you get the bed rug installed.

Painted to match shell with man door.

HeavyG

Opening day! Woot!!!