Pasta roller defective

EggHeadinFlorida

 Ordered my KitchenAid mixer as well as a three-piece pasta roller and cutter set last week and received it on Wednesday.
 Went to go use the pasta roller today and noticed that the attachment was wobbling while it was attached to the mixer.  So I took it out and noticed what you see in the pictures .  At first it look like a little black piece of some type of rubber that worked its way out of the internal mechanism.  Once I looked closer I saw that it was actually an O ring.  There's three small screws that hold the attachment plate to the side of the roller and when I took the screws off you can see the remainder of the Orion was all basically ate up.  Not sure what exactly the purpose of this Orion is it's not like any liquids or food passing go through this area. For $140, you would think the quality is a lot better 

Focker

Give KA a call, they will take care of you.
Mine cracked, may have been user error at the beginning by pushing too much dough, not sure..but KA sent me a new one.  Second unit has been fine.

Carolina Q

Return it for a refund. Get one of these... 

https://www.amazon.com/Imperia-Pasta-Machine-150-Cucina/dp/B0001IXA0I/ref=sr_1_9?ie=UTF8&qid=1483839258&sr=8-9&keywords=pasta+roller

Or an Atlas. 

It's really not that hard.

SciAggie

I agree with @Carolina Q

SkinnyV

My KA Set has been going strong 7 years and counting. Get a replacement

EggHeadinFlorida

I called Amazon. They are sending me a return label. I'll just order another one when they issue me the refund. 

Does anyone know what the oring is for?

Focker

Carolina Q said:

Return it for a refund. Get one of these... 

https://www.amazon.com/Imperia-Pasta-Machine-150-Cucina/dp/B0001IXA0I/ref=sr_1_9?ie=UTF8&qid=1483839258&sr=8-9&keywords=pasta+roller

Or an Atlas. 

It's really not that hard.

You got some pics of this easy pasta chief?
We used one at Frozen Fest 2012.  
A group effort, that was enough for me.

DoubleEgger

I love my KA roller.  Been using it for a few years. 

blind99

Focker said:

Carolina Q said:

Return it for a refund. Get one of these... 

https://www.amazon.com/Imperia-Pasta-Machine-150-Cucina/dp/B0001IXA0I/ref=sr_1_9?ie=UTF8&qid=1483839258&sr=8-9&keywords=pasta+roller

Or an Atlas. 

It's really not that hard.

You got some pics of this easy pasta chief?
We used one at Frozen Fest 2012.  
A group effort, that was enough for me.

For a family, I can bang out a batch of pasta pretty quick with my old crank pasta maker. 

For a fest? That needs power! Wifi would be good too. And Bluetooth for good measure. 

lkapigian

Carolina Q said:

Return it for a refund. Get one of these... 

https://www.amazon.com/Imperia-Pasta-Machine-150-Cucina/dp/B0001IXA0I/ref=sr_1_9?ie=UTF8&qid=1483839258&sr=8-9&keywords=pasta+roller

Or an Atlas. 

It's really not that hard.

I've had this for 30 years, love it.....love my KA Pro series, I think all their attachments fall short of the Mixer Quality and are overpriced ...My KA gets used for, well, mixing

Focker

Juggling crank yanking with two hands is a skillset.  There is a learning curve to the left, a sweet spot if you will.  Crank it too hard, or too fast...you could easily break somethin'.  A lot like declumping denatured rub..be careful.

Many found that sweet spot crank yanking to the beat of Divinyls, creating the most even sheets.
https://youtu.be/wv-34w8kGPM

Hungry Joe

Carolina Q said:

Return it for a refund. Get one of these... 

https://www.amazon.com/Imperia-Pasta-Machine-150-Cucina/dp/B0001IXA0I/ref=sr_1_9?ie=UTF8&qid=1483839258&sr=8-9&keywords=pasta+roller

Or an Atlas. 

It's really not that hard.

Disagree for one big reason, that pasta machine needs two people to make pasta. With the KA it can be done using one person. The end result is the same.


I know this because we used the old machine for almost 40 years before getting the KA.

DoubleEgger

Focker said:

Give KA a call, they will take care of you.
Mine cracked, may have been user error at the beginning by pushing too much dough, not sure..but KA sent me a new one.  Second unit has been fine.

No picture of it in the trash? 

Zippylip

Carolina Q said:

Return it for a refund. Get one of these... 

https://www.amazon.com/Imperia-Pasta-Machine-150-Cucina/dp/B0001IXA0I/ref=sr_1_9?ie=UTF8&qid=1483839258&sr=8-9&keywords=pasta+roller

Or an Atlas. 

It's really not that hard.

biggest pain in the balls on the planet, unless you have 3 arms

lkapigian

Hungry Joe said:

Carolina Q said:

Return it for a refund. Get one of these... 

https://www.amazon.com/Imperia-Pasta-Machine-150-Cucina/dp/B0001IXA0I/ref=sr_1_9?ie=UTF8&qid=1483839258&sr=8-9&keywords=pasta+roller

Or an Atlas. 

It's really not that hard.

Disagree for one big reason, that pasta machine needs two people to make pasta. With the KA it can be done use one person. The end result is the same.


I know this because we used the old machine for almost 40 years before getting the KA.

I've never had help using mine..clamp to table, easy peazy

Focker

DoubleEgger said:

Focker said:

Give KA a call, they will take care of you.
Mine cracked, may have been user error at the beginning by pushing too much dough, not sure..but KA sent me a new one.  Second unit has been fine.

No picture of it in the trash? 

Hahaha, not for this.  

Focker

Hungry Joe said:

Carolina Q said:

Return it for a refund. Get one of these... 

https://www.amazon.com/Imperia-Pasta-Machine-150-Cucina/dp/B0001IXA0I/ref=sr_1_9?ie=UTF8&qid=1483839258&sr=8-9&keywords=pasta+roller

Or an Atlas. 

It's really not that hard.

Disagree for one big reason, that pasta machine needs two people to make pasta. With the KA it can be done using one person. The end result is the same.


I know this because we used the old machine for almost 40 years before getting the KA.

Kinda funny, the peeps who have actually done both, won't go back to crank yanking.

The ones who proudly crank yank, have never posted a pasta dish or side, on the forum. Lol

Hungry Joe

We used to get called into duty when mom was making pasta as kids. Actually we thought it was fun back then. I've had the KA attachment over 10 years and think I'll keep doing it this way.  FWIW, I don't think I ever posted a pasta dish but have made sauce on the egg lots of times.

lkapigian

Focker said:

Hungry Joe said:

Carolina Q said:

Return it for a refund. Get one of these... 

https://www.amazon.com/Imperia-Pasta-Machine-150-Cucina/dp/B0001IXA0I/ref=sr_1_9?ie=UTF8&qid=1483839258&sr=8-9&keywords=pasta+roller

Or an Atlas. 

It's really not that hard.

Disagree for one big reason, that pasta machine needs two people to make pasta. With the KA it can be done using one person. The end result is the same.


I know this because we used the old machine for almost 40 years before getting the KA.

Kinda funny, the peeps who have actually done both, won't go back to crank yanking.

The ones who proudly crank yank, have never posted a pasta dish or side, on the forum. Lol

http://eggheadforum.com/discussion/1193847/dyal-sc-inspired-mac-and-cheese-wings#latest.  Here is some pot stickers I posted a while back. I have used automatic and manual pasta rollers , I like the manual, but that's just me...key is you are making good homemade anything, no matter how you get there, the fact your enjoying it is what matters..there is no right and wrong..heck ,I will even roll pasta with a pin and cut with a knife or pizza cutter

SkinnyV

Focker said:

Carolina Q said:

Return it for a refund. Get one of these... 

https://www.amazon.com/Imperia-Pasta-Machine-150-Cucina/dp/B0001IXA0I/ref=sr_1_9?ie=UTF8&qid=1483839258&sr=8-9&keywords=pasta+roller

Or an Atlas. 

It's really not that hard.

You got some pics of this easy pasta chief?
We used one at Frozen Fest 2012.  
A group effort, that was enough for me.

I had to ....

SciAggie

I'll throw this out just because I posted an opinion earlier as a "crank yanker". I make pasta by hand and get along with an Atlas hand crank. I can do it by myself but I'll concede it's easier with an extra set of hands. I'm guilty of posting opinions based on my own narrow window of experience - my wife is usually around and willing to help. Other's have a different environment to work in. 
I mix by hand, crank, and dry over a wooden dowel between two chairs. I guess I don't post because I don't cook pasta on the egg (can't get the water to boil).





After reading through this thread I'd certainly be trying to get a warranty replacement. If I'd spent a ton of money on a mixer I'd want to use it - I suppose if the OP had wanted a hand crank that's what would have been bought. 
Y'all have a good day. 

lkapigian

SciAggie said:

I'll throw this out just because I posted an opinion earlier as a "crank yanker". I make pasta by hand and get along with an Atlas hand crank. I can do it by myself but I'll concede it's easier with an extra set of hands. I'm guilty of posting opinions based on my own narrow window of experience - my wife is usually around and willing to help. Other's have a different environment to work in. 
I mix by hand, crank, and dry over a wooden dowel between two chairs. I guess I don't post because I don't cook pasta on the egg (can't get the water to boil).





After reading through this thread I'd certainly be trying to get a warranty replacement. If I'd spent a ton of money on a mixer I'd want to use it - I suppose if the OP had wanted a hand crank that's what would have been bought. 
Y'all have a good day. 

Thanks For Sharing 

Dredger

I have a Simac that I bought in the early 80's. It mixes and extrudes. I have about 12 brass dies that make any shape I want from flat to hollow like bucatoni, ziti, elbows, shells, and more. It's still going strong and is a tank. I don't think they distribute it anymore. I also have a hand crank that I bought strictly for the ravioli attachment. Both are fun to work with and both are a PITA to clean. I also don't post pics of pasta, but will the next time I use the machines. Fresh pasta is amazing.

Hungry Joe

SciAggie

blind99

Dredger said:

I have a Simac that I bought in the early 80's. It mixes and extrudes. I have about 12 brass dies that make any shape I want from flat to hollow like bucatoni, ziti, elbows, shells, and more. It's still going strong and is a tank. I don't think they distribute it anymore. I also have a hand crank that I bought strictly for the ravioli attachment. Both are fun to work with and both are a PITA to clean. I also don't post pics of pasta, but will the next time I use the machines. Fresh pasta is amazing.

@dredger what cleaning do you do with the crank machine? When I inherited mine I was instructed that if I ever let water come in contact with it, the hand of a dead Italian grandmother would reach from the grave and smack me. 

Dredger

@blind99, I let the hand crank machine dry thoroughly and brush the excess flour and pasta pieces off. I guess it's no so hard to clean. The Simac has to be taken apart, allowed to dry to remove all dough and flour remnants from the small parts, and then hand washed. That process takes up a fair amount of counter space for awhile. It's worth it though. I would heed the advice about cleaning yours. Wouldn't want any ticked off deceased Italian grandmother seeking me out, lol.

EggHeadinFlorida

This was some of the best damn bread I've ever had!! Bread flour, water, fennel, entire garlic bulb that was sautéed, thyme. Cooked in enamel coated cast iron @ 450deg for 35 min. Then remove lid and cook another 10-15min until top is golden brown. .

pasta was good. A little sticky after I cooked it, but not bad for first time. 

blind99

Beautiful! Quite a feast!

@dredger I got to use one of those automatic pasta makers awhile back. I have to admit it was very awesome!  One more gadget I need to make room for. 

Dredger

Well @blind99, you guys know me and my toys, lol. We've decided our next house will have a kitchen with at least enough counter space to hold our most used toys. The Simac is more than 30 years old and I feel certain that it will last for a long time. It deserves it's own spot on a counter. 

Judy Mayberry

Why did I get rid of my hand-crank pasta machine? FLOUR ALL OVER THE *%&*#$ PLACE! I had a chance to use the current Philips electric pasta maker, and it was love at first sight. It makes way more than I can use, but if you can use it, it is a real winner. It even makes sheets of pasta for ravioli or lasagna.