OT - What are you doing right now?

milesvdustin

Shot some model rockets off in the yard this morning, then us and the neighbor shot off a bunch of old fireworks on opposite sides of the pond. Social distancing you know. 

lkapigian

Watched Karate Kid .....Daniel won again

Botch

Makin' shrimp stock:
 

 
Stir-fry raw shrimp shells, tails (and heads if you have them) until they turn nice and orange-y, then simmer in water to cover ten minutes, strain and refrigerate.  I had a stub of fresh ginger that got my fingers too close to my Micro-Plane, so I sliced it thinly and included that.  
Some kinda shrimp dish for lunch tomorrow!  

Sea2Ski

Rough planing a board. 

lkapigian

Trying to hold it all together 

Acn

Not egged, but damn tasty.

DoubleEgger

lkapigian said:

Watched Karate Kid .....Daniel won again

Another perspective on it. 

https://m.youtube.com/watch?v=C_Gz_iTuRMM

lkapigian

DoubleEgger said:

lkapigian said:

Watched Karate Kid .....Daniel won again

Another perspective on it. 

https://m.youtube.com/watch?v=C_Gz_iTuRMM

DoubleEgger said:

lkapigian said:

Watched Karate Kid .....Daniel won again

Another perspective on it. 

https://m.youtube.com/watch?v=C_Gz_iTuRMM

Ha ha

keener75

DoubleEgger said:

lkapigian said:

Watched Karate Kid .....Daniel won again

Another perspective on it. 

https://m.youtube.com/watch?v=C_Gz_iTuRMM

OMG that is funny! Not to mention the Crane kick to the face to win the tournament is technically illegal!

Botch

DoubleEgger said:

lkapigian said:

Watched Karate Kid .....Daniel won again

Another perspective on it. 

https://m.youtube.com/watch?v=C_Gz_iTuRMM

I've never seen the original, but could get the gist AND appreciate the reinterpretation; hilarious!  

thetrim

GATraveller

thetrim said:

Is that how/where you woke up?

fishlessman

set the cruise at 90 mph and made a hundred miles stopping only for the tolls. passed a new hampshire statey and nothing

ColtsFan

fishlessman said:

set the cruise at 90 mph and made a hundred miles stopping only for the tolls. passed a new hampshire statey and nothing

That's funny because a good buddy of mine is an Indiana State Trooper. He says they aren't even bothering with speeders or minor violations. Still sitting and running radar, but if anything, they'll flip their lights on to get you to slow down

DoubleEgger

ColtsFan said:

fishlessman said:

set the cruise at 90 mph and made a hundred miles stopping only for the tolls. passed a new hampshire statey and nothing

That's funny because a good buddy of mine is an Indiana State Trooper. He says they aren't even bothering with speeders or minor violations. Still sitting and running radar, but if anything, they'll flip their lights on to get you to slow down

Keep a squirt bottle in the car so you can look like you’re sweating from a fever if you get pulled. 

SonVolt

Thinking about signing up for an intro to welding night class at the local community college. Would love to learn how to make my own smokers and outdoor cooking equipment. Would this be the ideal first step?

lkapigian

SonVolt said:

Thinking about signing up for an intro to welding night class at the local community college. Would love to learn how to make my own smokers and outdoor cooking equipment. Would this be the ideal first step?

Not a bad step if they teach lay out and not just how to weld ....Geometry is a great start 

speed51133

I was thinking this is a perfect time to max out your project car to find top speed. But I saw like 3 cops gunning for speeders yesterday in their hideouts. On an interstate...

SonVolt

lkapigian said:

SonVolt said:

Thinking about signing up for an intro to welding night class at the local community college. Would love to learn how to make my own smokers and outdoor cooking equipment. Would this be the ideal first step?

Not a bad step if they teach lay out and not just how to weld ....Geometry is a great start 

Here's my 2 options. I guess I should start with the Basic course as I know zilch about welding at the moment. 

Basic Arc Welding

This course is designed for the beginning welder who has limited or no welding experience. The emphasis is on basic practical welding of steel for home or farm use. Safety will be emphasized with supervised lab practice in gas welding, cutting, and arc welding. Various welding equipment and welding techniques will be surveyed. Welding equipment and consumables are included.

Advanced Welding

This course is designed for the basic welder who has introductory welding experience. The emphasis is on welding of various materials and techniques. Student chosen projects are often included in this course. Safety will be emphasized with supervised lab practice in gas welding and arc welding. Welding equipment and consumables are included. Minimum enrollment required.

DoubleEgger

SonVolt said:

Thinking about signing up for an intro to welding night class at the local community college. Would love to learn how to make my own smokers and outdoor cooking equipment. Would this be the ideal first step?

I’m assuming this is when the college reopens. 

I wish I would have learned how to stick weld. 

SonVolt

The spring class was cancelled so this would be for June, assuming we're over this shiz by then. 

speed51133

I would watch a bunch of you tube videos before your first class. Welding isn't hard, but it simply takes time doing it over and over. Do you have a welder yet? I also think a crappy welder is terrible to learn on. They are often difficult to weld with for anyone. Buy a decent one if you are getting one. I presume you want to MIG weld mild steel?

SonVolt

speed51133 said:

I would watch a bunch of you tube videos before your first class. Welding isn't hard, but it simply takes time doing it over and over. Do you have a welder yet? I also think a crappy welder is terrible to learn on. They are often difficult to weld with for anyone. Buy a decent one if you are getting one. I presume you want to MIG weld mild steel?

My father-in-law is a pipe fitter and has all the equipment on the farm I can use. I'd ask him to teach me but he's a little short on patience (to put it politely), so I thought I'd learn from an instructor initially. 

GrateEggspectations

DoubleEgger said:

SonVolt said:

Thinking about signing up for an intro to welding night class at the local community college. Would love to learn how to make my own smokers and outdoor cooking equipment. Would this be the ideal first step?

I’m assuming this is when the college reopens. 

I wish I would have learned how to stick weld. 

Never too late.

WeberWho

DoubleEgger said:

SonVolt said:

Thinking about signing up for an intro to welding night class at the local community college. Would love to learn how to make my own smokers and outdoor cooking equipment. Would this be the ideal first step?

I’m assuming this is when the college reopens. 

I wish I would have learned how to stick weld. 

I took a welding class over at the community college when I was in high school with my friend. My teacher Jeff was pretty much gifted the job as his dad was the hydraulic teacher at the college forever.  I could probably count on one hand the total days we spent actually learning something about welding. I think we spent one week building a small bridge using a tig welder to test its durability. Otherwise we just goofed around as Jeff was a young teacher and didn't really care. Most of the time we helped him with his own personal projects. Jeff was a super smart guy and would have all these off the wall ideas. I remember helping him turn a big commercial size walk behind mower into a remote control lawnmower. By the end of the school term he was outside driving it around with a remote control. Other times we would retread his wheels on his full frame tube chassis 4x4 he made by scratch. If we had random projects we could bring them in and work on it. Nothing really ever to do with welding. Jeff was always working on crazy projects. At the time he was driving an Isuzu truck that he welded two cabs together. Just because he could. 

Looking back I don't regret taking the class as it was one of the most fun classes I took in high school. Jeff was just fun to watch and listen to. I just wish we learned something about welding!

I ran across my teacher Jeff years later on the news. He clearly hasn't changed. They were doing a story on him and his friend making motor powered barbie power wheels. He hasn't changed one bit!

https://youtu.be/gdKoH1PiFXI 

fishlessman

SonVolt said:

speed51133 said:

I would watch a bunch of you tube videos before your first class. Welding isn't hard, but it simply takes time doing it over and over. Do you have a welder yet? I also think a crappy welder is terrible to learn on. They are often difficult to weld with for anyone. Buy a decent one if you are getting one. I presume you want to MIG weld mild steel?

My father-in-law is a pipe fitter and has all the equipment on the farm I can use. I'd ask him to teach me but he's a little short on patience (to put it politely), so I thought I'd learn from an instructor initially. 

the basic course would be fine, but you need to practice. you can pretty much weld a smoker all in the flat position. buy a box of 6011 1/8 dia and burn thru the box. its a farmers rod, burns thru paint rust etc.  if he sees you practicing he is more likely to look over your shoulder

lkapigian

WeberWho said:

DoubleEgger said:

SonVolt said:

Thinking about signing up for an intro to welding night class at the local community college. Would love to learn how to make my own smokers and outdoor cooking equipment. Would this be the ideal first step?

I’m assuming this is when the college reopens. 

I wish I would have learned how to stick weld. 

I took a welding class over at the community college when I was in high school with my friend. My teacher Jeff was pretty much gifted the job as his dad was the hydraulic teacher at the college forever.  I could probably count on one hand the total days we spent actually learning something about welding. I think we spent one week building a small bridge using a tig welder to test its durability. Otherwise we just goofed around as Jeff was a young teacher and didn't really care. Most of the time we helped him with his own personal projects. Jeff was a super smart guy and would have all these off the wall ideas. I remember helping him turn a big commercial size walk behind mower into a remote control lawnmower. By the end of the school term he was outside driving it around with a remote control. Other times we would retread his wheels on his full frame tube chassis 4x4 he made by scratch. If we had random projects we could bring them in and work on it. Nothing really ever to do with welding. Jeff was always working on crazy projects. At the time he was driving an Isuzu truck that he welded two cabs together. Just because he could. 

Looking back I don't regret taking the class as it was one of the most fun classes I took in high school. Jeff was just fun to watch and listen to. I just wish we learned something about welding!

I ran across my teacher Jeff years later on the news. He clearly hasn't changed. They were doing a story on him and his friend making motor powered barbie power wheels. He hasn't changed one bit!

https://youtu.be/gdKoH1PiFXI 

as I read the post and glancing at the picture I read Jeff had Really Changed I quickly assumed Jeff became June, my bad for glancing over it.............still made me laugh to myself 

alaskanassasin

It has been said on here before, if you can run a hot glue gun you can mig weld.  The only pointers I can give you are prep work and cleanliness are of upmost importance, like painting a car. Get a auto darkening helmet from TSC if your father in law does not have one.  Depending on your set up keep a fire extinguisher handy.

SonVolt

How much practice would it take before giving something like this a shot? Minus the trailer. I sent an email to the company in Texas requesting a quote on the model below and they said $17,999. I don't know who they're fooling, but I would have thought $4k tops...

Ozzie_Isaac

Enjoying a my coffee break and practicing responsible social distancing.