Share your photos by tagging us and using the hashtag #BigGreenEgg.
Want to see how the EGG is made? Click to Watch
Holy cow. Feeling very lucky today.
Comments
-
Glad you are OK. Getting a fire extinguisher for the deck now, and rethinking fire safety.
I like my butt rubbed and my pork pulled.
Member since 2009 -
Just now seeing this.. Glad you're ok and it was only a table. I think you're right about it being the brush.. Is the brown spot just below the gasket level where the brush would have been?
LBGE
MS Gulf Coast - Proud member of the Who Dat Nation!
My Not Frequently Updated Basically Dead Blog: http://datcue.wordpress.com -
bccomstock said:Just now seeing this.. Glad you're ok and it was only a table. I think you're right about it being the brush.. Is the brown spot just below the gasket level where the brush would have been?Keepin' It Weird in The ATX FBTX
-
WOW, that is a scary pic. Really glad it turned out the way it did, it really could have been a different ending. The Mrs and I were talking about a table, looks like I'm pushing for SS or stone.Bx - > NJ ->TX!!!All to get cheaper brisket!
-
It's easy to set a wire brush or towel or plastic handled knife down -- and it doesn't have to be a wood table. This had me thinking and i am cooking a couple of butts this morning, and i started looking at my setup!! Well my large in in a nest with fold out tables. I could see where i could be in a hurry getting the meat off the grill and leave a towel resting on one of the egg's pedistals. That could easily catch on fire if it was touching the outside of the egg. Below the pedistal is a five gallon plastic bucket -- that would get going pretty damn good. Alongside the bucket is my offset smoker with a full canvas cover -- that burns good!! Above the offset is a plastic Kayak. That would have my whole porch on fire!! I am re-arranging my set up as soon as it cools down from this butt cook!!!
-
I'm really glad to hear everyone is safe is sound and the damage is minimal. Thanks for posting this CT. It is definitely an eye opener. We are all playing with fire!Which came first the chicken or the egg? I egged the chicken and then I ate his leg.
-
Dayum! Count your blessings!LBGE, Weber OTG w/ Rotisserie, Weber Genesis S-330, Chargriller Duo, AR-15, AK-47
-
If you don't accidentally set fire to the table, deck, house or hair, you're doing it right.
______________________________________________I love lamp.. -
CT, it appears the fire did not start from the bottom, perhaps not having the paver was a blessing in disguise because its extra weight may have caused the whole thing to collapse? just wondering.canuckland
-
Canugghead said:CT, it appears the fire did not start from the bottom, perhaps not having the paver was a blessing in disguise because its extra weight may have caused the whole thing to collapse? just wondering.Keepin' It Weird in The ATX FBTX
-
Glad it was just the table that got burned here. Let this be a cautionary tale for everyone here."I've made a note never to piss you two off." - Stike
-
@CT I just heard from the president of the Fire Extinguisher Manufacturer's Society and he wanted to thank you for causing an entire forum to go into full-fledged paranoia mode. Sales have never been so good, he said.
______________________________________________I love lamp.. -
nolaegghead said:@CT I just heard from the president of the Fire Extinguisher Manufacturer's Society and he wanted to thank you for causing an entire forum to go into full-fledged paranoia mode. Sales have never been so good, he said.
Steve
Caledon, ON
-
Little Steven said:nolaegghead said:@CT I just heard from the president of the Fire Extinguisher Manufacturer's Society and he wanted to thank you for causing an entire forum to go into full-fledged paranoia mode. Sales have never been so good, he said.Keepin' It Weird in The ATX FBTX
-
I have a concrete deck and a house now clad in stucco over cement board. I ain't skeered. The old roof was aluminum and it went up like fireworks. I just need the granite for my table
Steve
Caledon, ON
-
Little Steven said:I have a concrete deck and a house now clad in stucco over cement board. I ain't skeered. The old roof was aluminum and it went up like fireworks. I just need the granite for my tableI put all the insides back together and cooked on it tonight on a paver on the deck. That lamb ain't gonna cook itself. Back in the saddle..........Got the warranty approved and headed in to get new ring and box tomorrow.Keepin' It Weird in The ATX FBTX
-
If you have a used restaurant supply nearby check the stainless cabinets. I bought one ten years ago and it's just waiting for a top.
Steve
Caledon, ON
-
That's CRAZY!!!! I have a similar table and have left my egg smoldering for too long considering what I see. I do have an extinguisher and fortunately my table is on concrete but that's a true lesson learned for sure.Glad everyone is OK, everyTHING else is replaceable.
-
How do you think the brush handle caught fire? Just being next to the Egg? That does not seem right to me. The Egg is usually "Cooler" on the outside.
_______________________________________________________________
LBGE, Adjustable Rig, Spider, High-Que grate, maverick ET-732, Thermapen,
Garnerville, NY -
robnybbq said:How do you think the brush handle caught fire? Just being next to the Egg? That does not seem right to me. The Egg is usually "Cooler" on the outside.
still not sure what happened but the brush is incinerated. still piecing it all togetherKeepin' It Weird in The ATX FBTX -
My table did the same thing and it wasn't a brush handle it caught around the edge of the table. I had cooked in this table for several years before this happened I guess the wood had dried just enough and the heat from the outside of th egg was hot enough. I haven't checked the outside ceramic temp on my large before but I have on my mini and the mini has registered over 500 degrees on the outside. I now make sure I have close to an inch gap all the way around the egg.
-
Lit said:
My table did the same thing and it wasn't a brush handle it caught around the edge of the table. I had cooked in this table for several years before this happened I guess the wood had dried just enough and the heat from the outside of th egg was hot enough. I haven't checked the outside ceramic temp on my large before but I have on my mini and the mini has registered over 500 degrees on the outside. I now make sure I have close to an inch gap all the way around the egg.
wow. i need to figure out a better set up for mine. ft i want mine anywhere near my kitchen, it's going to be on a deck. my boards are not wood but all the railing is and so is the back part of my house.Keepin' It Weird in The ATX FBTX -
Lit said:
My table did the same thing and it wasn't a brush handle it caught around the edge of the table. I had cooked in this table for several years before this happened I guess the wood had dried just enough and the heat from the outside of th egg was hot enough. I haven't checked the outside ceramic temp on my large before but I have on my mini and the mini has registered over 500 degrees on the outside. I now make sure I have close to an inch gap all the way around the egg.
btw- i have that black soot all over mine as well. I bought some TSP to scrub it with today. di you clean yours off and how did you do it?Keepin' It Weird in The ATX FBTX -
I wonder if the plastic on the brush acted as a heat conduit at least or possibly reached it's ignition point. Some plastics will ignite around 350 F. Possibly, the plastic melted allowing the metal in the handle to heat up enough to ignite the wood, which in dry, weathered wood, the point is around 150 F. Similar to how Lit's table burned, maybe the egg itself did this since you let it run on 600 for a prolonged time.Hmmm....... A new wrinkle to add to the smoke ring experiment keeping me up at night.
-
This thread is a great eye-opener. I forwarded to my brother who is about to build a table for his deck. I think I am going with a concrete/stone or stainless table.Columbia, SC --- LBGE 2011 -- MINI BGE 2013
-
Chubbs said:This thread is a great eye-opener. I forwarded to my brother who is about to build a table for his deck. I think I am going with a concrete/stone or stainless table.
-
ive read before that with repeated heatings the ignition point of wood goes down, i think that there was a study done with a steam pipe that touched a wood floor and eventually set it on fire. maybe something similar with an egg in a wooden table
fukahwee maineyou can lead a fish to water but you can not make him drink it -
Centex. The large cleaned up pretty easy think I just used a blue scotch brite pad. For some reason the small is older and not glazed as well and it still has black marks on it. I am sure I could get them off just lazy.
-
I do not like those pictures. Time to move the Egg away from the house. Now to figure out how to make it usable downstairs in the yard - year round. Had it in the yard last year and it was in a mud pit. Ended up not using it in the winter until I moved it up to the wooden deck. We have been trying to use it at least once a week but its got to go back downstairs now.
_______________________________________________________________
LBGE, Adjustable Rig, Spider, High-Que grate, maverick ET-732, Thermapen,
Garnerville, NY -
From now on, anytime someone burns their crap down, it will be known as THE CEN-TEX METHOD!!!Be careful, man! I've got a beverage here.
Categories
- All Categories
- 182.8K EggHead Forum
- 15.7K Forum List
- 459 EGGtoberfest
- 1.9K Forum Feedback
- 10.3K Off Topic
- 2.2K EGG Table Forum
- 1 Rules & Disclaimer
- 9K Cookbook
- 12 Valentines Day
- 91 Holiday Recipes
- 223 Appetizers
- 516 Baking
- 2.4K Beef
- 88 Desserts
- 165 Lamb
- 2.4K Pork
- 1.5K Poultry
- 30 Salads and Dressings
- 320 Sauces, Rubs, Marinades
- 543 Seafood
- 175 Sides
- 121 Soups, Stews, Chilis
- 36 Vegetarian
- 100 Vegetables
- 313 Health
- 293 Weight Loss Forum