Welcome to the EGGhead Forum - a great place to visit and packed with tips and EGGspert advice! You can also join the conversation and get more information and amazing kamado recipes by following Big Green Egg to Experience our World of Flavor™ at:
Facebook  |  Twitter  |  Instagram  |  Pinterest  |  Youtube  |  Vimeo
Share your photos by tagging us and using the hashtag #BigGreenEgg.

Want to see how the EGG is made? Click to Watch

BGE Rotisserie

Options
135

Comments

  • CGS
    CGS Posts: 71
    Options
    Stormbringer said:
    Found this post from 2016 requesting that CGS make a rotisserie, with an accurate prediction from @westernbbq ...
    westernbbq said:
    Ill fabricate my own before i overpay for a joetisserie.  iF bge got around to development of it and announce that they had rotisserie setup for bge, theyll announce it and then tease us with release dates for about a year, and then itll be an overpriced item in the 300-400 range

    Please, Tom for the sanity of ceramic grillers everywhere, make a ring, spit and motor setup for all sizes of eggs and you will not be able to keep up with demand

    I promise to do my part!

    https://eggheadforum.com/discussion/1201754/attn-tom-at-cgs-please-make-rotisserie-setup-for-bge
    Oh man, that rotisserie set-up was a long, long time ago, even pre kamado joe rotisserie. Back then, I thought about making them but we were just getting going and it was really outside our wheelhouse.

    Biggest thing I found with spinning is no so much moving fire to the side but how close the food gets to the fire along the bottom turn. 

    t   
    · Share on FacebookShare on Twitter
  • Langner91
    Langner91 Posts: 2,120
    Options
    stlcharcoal said:
    Langner91 said:


    Ok, so they are a little more expensive, but they have an etched aluminum Big Green Egg logo plate.  


    I don't like how on that flat basket is has that gigantic name plate blocking the fish.  Put a big piece of salmon or a rack of ribs in it and you're gonna have a 6x2" rectangle in the middle shielded from the heat??  First order of business, cut that stupid thing out with some tin snips!!

    I was so delirious with retail glee at the thought of having a BGE rotisserie that I failed to even finish the video and look at the optional baskets!  I must have been passing in and out of consciousness!

    Weber would have labeled that name plate a "flavorizer" plate.

    I also noticed that the "porn-motional" video above didn't have the lump diverted in any way.   Just spinning the protein directly over a bed of hot coals.
    Clinton, Iowa
    · Share on FacebookShare on Twitter
  • Grogu
    Grogu Posts: 125
    Options
    CGS said:
    I think the pizza wedge is out too, price $119.95 for large, not sure about others. 

    looks to be a two piece cast aluminum wedge shape frame with opening in front. You'll need a rack to hold the stone(s) near felt line. 14" wide pizza is max.

    t
    Anyone have anymore info on this pizza wedge? I went searching and just keep finding the aftermarket porta pizza thing.
    · Share on FacebookShare on Twitter
  • Canugghead
    Canugghead Posts: 11,518
    Options
    Challenge for @paqman
    3D print a wedge mould and fill it with reinforcing wires and high temp cement?
    canuckland
    · Share on FacebookShare on Twitter
  • CGS
    CGS Posts: 71
    Options
    Grogu said:
    CGS said:
    I think the pizza wedge is out too, price $119.95 for large, not sure about others. 

    looks to be a two piece cast aluminum wedge shape frame with opening in front. You'll need a rack to hold the stone(s) near felt line. 14" wide pizza is max.

    t
    Anyone have anymore info on this pizza wedge? I went searching and just keep finding the aftermarket porta pizza thing.
    I picked some up today, along with the rotisseries. give me a shout at the store if you like. Hope to dig deeper tomorrow with one. 

    t
    · Share on FacebookShare on Twitter
  • Stormbringer
    Stormbringer Posts: 2,070
    edited November 2022
    Options
    CGS said:
    Grogu said:
    CGS said:
    I think the pizza wedge is out too, price $119.95 for large, not sure about others. 

    looks to be a two piece cast aluminum wedge shape frame with opening in front. You'll need a rack to hold the stone(s) near felt line. 14" wide pizza is max.

    t
    Anyone have anymore info on this pizza wedge? I went searching and just keep finding the aftermarket porta pizza thing.
    I picked some up today, along with the rotisseries. give me a shout at the store if you like. Hope to dig deeper tomorrow with one. 

    t
    Will you be listing the pizza thingy on your website? Would be great to see some pics of it.

    -----------------------------------------------------------------------
    | Cooking and blogging with a Large and Minimax in deepest, darkest England-shire
    | My food blog ... BGE and other stuff ... http://www.thecooksdigest.co.uk
    -----------------------------------------------------------------------


    · Share on FacebookShare on Twitter
  • loco_engr
    loco_engr Posts: 5,765
    Options
    CGS said:
    price JohnInCarolina said:
    CGS said:
    I am told EGG needs to sticker the box with one small notification and should be out in week or two. Price is set and we have on order. T
    What will the price be compared to the Joetisserie?
    Large 329.95
    xl 399.95
    FWIW:  Emailed my local dealer in Marysville KS and he quoted me
    "Price for that is $335" for BGE XL
    aka marysvilleksegghead
    Lrg 2008
    mini 2009
    XL 2021 (sold 8/24/23)
    Henny Youngman:
    I said to my wife, 'Where do you want to go for our anniversary?' She said, 'I want to go somewhere I've never been before.' I said, 'Try the kitchen.'
    Bob Hope: When I wake up in the morning, I don’t feel anything until noon, and then it’s time for my nap
    · Share on FacebookShare on Twitter
  • Stormbringer
    Stormbringer Posts: 2,070
    Options
    Picture from a trade show in Europe showing the pizza wedge


    -----------------------------------------------------------------------
    | Cooking and blogging with a Large and Minimax in deepest, darkest England-shire
    | My food blog ... BGE and other stuff ... http://www.thecooksdigest.co.uk
    -----------------------------------------------------------------------


    · Share on FacebookShare on Twitter
  • Langner91
    Langner91 Posts: 2,120
    Options
    Stormbringer said:
    Picture from a trade show in Europe showing the pizza wedge


    I wonder if the composite handle is required for the pizza wedge?  I have never seen a handle like that!
    Clinton, Iowa
    · Share on FacebookShare on Twitter
  • shtgunal3
    shtgunal3 Posts: 5,647
    Options
    I haven’t either but I think I like it.

    ___________________________________

     

     LBGE,SBGE, and a Mini makes three......Sweet home Alabama........ Stay thirsty my friends .

    · Share on FacebookShare on Twitter
  • unoriginalusername
    unoriginalusername Posts: 1,063
    Options
    Langner91 said:
    Stormbringer said:
    Picture from a trade show in Europe showing the pizza wedge


    I wonder if the composite handle is required for the pizza wedge?  I have never seen a handle like that!
    Unsure about composite. On my classic Kj with the DoJoe I melted the handle on one of my first goes with it…. Looking at the above without the heat deflector wing that the DoJoe has unsure if that will be better or worse for the heat the handle gets subjected too

    the DoJoe is limited to 700, go above and you can melt the handle, destroy your gaskets (the metal gets heat soaked and is heavy and that tends to unglue the gasket if not flatten them from their OEM bounce) so will be interesting to see how this works 

    it would have been nice if they added a door for shutting down the egg without burning the rest of your fuel 
    · Share on FacebookShare on Twitter
  • Langner91
    Langner91 Posts: 2,120
    Options
    The more I look at it, does it appear that handle sticks out further from the egg?  Maybe it is just because the silicone(?) handle is thinner, but it seems that handle is extended out.

    Anyway, I hadn't thought about gaskets or shutdown.  Good comment @unoriginalusername!
    Clinton, Iowa
    · Share on FacebookShare on Twitter
  • alaskanassasin
    alaskanassasin Posts: 7,650
    Options
    loco_engr said:
    CGS said:
    price JohnInCarolina said:
    CGS said:
    I am told EGG needs to sticker the box with one small notification and should be out in week or two. Price is set and we have on order. T
    What will the price be compared to the Joetisserie?
    Large 329.95
    xl 399.95
    FWIW:  Emailed my local dealer in Marysville KS and he quoted me
    "Price for that is $335" for BGE XL
    Sounds like he’s looking at their cost
    South of Columbus, Ohio.


    · Share on FacebookShare on Twitter
  • Mark_B_Good
    Mark_B_Good Posts: 1,516
    Options
    Does the hinge need to be adjusted to fit that rotissarie? I get the angle, that it needs to be that way to make the front close tight ... but what about the extra gap that is needed at the back to accomodate the ring?
    Napoleon Prestige Pro 665, XL BGE, Lots of time for BBQ!
    · Share on FacebookShare on Twitter
  • armyguy13
    armyguy13 Posts: 13
    Options
    I know it’s relatively new, but does anyone know if the motor is water resistant? 
    · Share on FacebookShare on Twitter
  • Grader07
    Grader07 Posts: 264
    Options
    Mark_B_Good said:
    Does the hinge need to be adjusted to fit that rotissarie? I get the angle, that it needs to be that way to make the front close tight ... but what about the extra gap that is needed at the back to accomodate the ring?
    Wow I would hope not as that would make for constant changing if you went back and forth between regular cooks and tisserie….   But good question!
    · Share on FacebookShare on Twitter
  • cmac610
    cmac610 Posts: 151
    Options
    Mark_B_Good said:
    Does the hinge need to be adjusted to fit that rotissarie? I get the angle, that it needs to be that way to make the front close tight ... but what about the extra gap that is needed at the back to accomodate the ring?
    Not at all. Because of the angle of the dome closing, it seals front and back. No adjustment necessary. 
    Craig aka Cmac Cooks
    Amesbury, MA
    #BGETeamGreen #TeamArteflame #TeamBarrelProof
    XL BGE, Mini-Max, La Caja China, Arteflame Classic 40, Arteflame One 20, Arteflame Euro 20, Cotton Gin Harvester, Weber Classic, Gozney Dome, Anova wifi Sous Vide.
    · Share on FacebookShare on Twitter
  • CPFC1905
    CPFC1905 Posts: 1,861
    Options
    The rotisserie has dropped over here too.

    For comparison purposes and certainly not bringing any judgment;
    Large BGE rotisserie £275 or £500 for the roasting pack 
    Joetisseries that might or might not fit a Large BGE £253
    LetzQ Spit that might or might not fit a Large BGE £230

    Having just received a genuine set of BGE Salt and Pepper pots you know  where my allegiances lie. 
    Other girls may try to take me away 
    But you know, it's by your side I will stay
    · Share on FacebookShare on Twitter
  • Langner91
    Langner91 Posts: 2,120
    Options
    What comes in the "roasting pack"?  At nearly double, I am trying to imagine what it includes!
    Clinton, Iowa
    · Share on FacebookShare on Twitter
  • Stormbringer
    Stormbringer Posts: 2,070
    Options
    CPFC1905 said:
    The rotisserie has dropped over here too.

    For comparison purposes and certainly not bringing any judgment;
    Large BGE rotisserie £275 or £500 for the roasting pack 
    Joetisseries that might or might not fit a Large BGE £253
    LetzQ Spit that might or might not fit a Large BGE £230

    Having just received a genuine set of BGE Salt and Pepper pots you know  where my allegiances lie. 
    The LetzQ fits the large perfectly I have one. Also the motor is on the left and the spit handle on the right. As I’m right handed I’m happy with my one. I thought the large LetzQ was £200 though. 
    -----------------------------------------------------------------------
    | Cooking and blogging with a Large and Minimax in deepest, darkest England-shire
    | My food blog ... BGE and other stuff ... http://www.thecooksdigest.co.uk
    -----------------------------------------------------------------------


    · Share on FacebookShare on Twitter
  • Langner91
    Langner91 Posts: 2,120
    Options
    How much is that in "American"?

    Do I multiply by 5/9 and add 32 or subtract?
    Clinton, Iowa
    · Share on FacebookShare on Twitter
  • CPFC1905
    CPFC1905 Posts: 1,861
    Options
    Langner91 said:
    What comes in the "roasting pack"?  At nearly double, I am trying to imagine what it includes!
    https://www.biggreenegg.co.uk/p/rotisserie?utm_source=drip&utm_medium=email&utm_campaign=The%20Big%20Green%20EGG%20Rotisserie%20is%20finally%20here%21

    Eggspander and baking stone bundled in.
    Other girls may try to take me away 
    But you know, it's by your side I will stay
    · Share on FacebookShare on Twitter
  • turdferguson
    turdferguson Posts: 10
    Options
    Will this work with a rutland gasket?  Maybe just add a felt gasket to the top of the rotisserie?
    · Share on FacebookShare on Twitter
  • cmac610
    cmac610 Posts: 151
    Options
    turdferguson said:
    Will this work with a rutland gasket?  Maybe just add a felt gasket to the top of the rotisserie?
    Absolutely. I have a single Rutland on the bottom. I get a little air gap leak, but not enough to make any real difference. Especially since most rotisserie cooks are pretty hot and fast. And if you get more leak, yes, add a felt gasket to the rotisserie. 
    Craig aka Cmac Cooks
    Amesbury, MA
    #BGETeamGreen #TeamArteflame #TeamBarrelProof
    XL BGE, Mini-Max, La Caja China, Arteflame Classic 40, Arteflame One 20, Arteflame Euro 20, Cotton Gin Harvester, Weber Classic, Gozney Dome, Anova wifi Sous Vide.
    · Share on FacebookShare on Twitter
  • OhioEgger
    OhioEgger Posts: 901
    Options
    cmac610 said:
    And if you get more leak, yes, add a felt gasket to the rotisserie. 
    I would say any extra gasket is completely unnecessary. There is a big opening on the side where the spit connects to the motor, which is far more leakage opportunity than any tiny gasket gap.
    Cincinnati, Ohio. Large BGE since 2011. Still learning.
    · Share on FacebookShare on Twitter
  • Langner91
    Langner91 Posts: 2,120
    Options
    BGE Rotisserie secured!  I will provide my thoughts after the holiday, once I can stand the thought of cooking more poultry.  My sister asked that I not experiment with it for the holiday bird.

    Maybe I will spin a steak instead...
    Clinton, Iowa
    · Share on FacebookShare on Twitter
  • Mark_B_Good
    Mark_B_Good Posts: 1,516
    Options
    Stormbringer said:
    CPFC1905 said:
    The rotisserie has dropped over here too.

    For comparison purposes and certainly not bringing any judgment;
    Large BGE rotisserie £275 or £500 for the roasting pack 
    Joetisseries that might or might not fit a Large BGE £253
    LetzQ Spit that might or might not fit a Large BGE £230

    Having just received a genuine set of BGE Salt and Pepper pots you know  where my allegiances lie. 
    The LetzQ fits the large perfectly I have one. Also the motor is on the left and the spit handle on the right. As I’m right handed I’m happy with my one. I thought the large LetzQ was £200 though. 
    Can you turn the ring upside down, to change the side the motor is on?
    Napoleon Prestige Pro 665, XL BGE, Lots of time for BBQ!
    · Share on FacebookShare on Twitter
  • Grader07
    Grader07 Posts: 264
    Options
    Just ordered my BGE large rotisserie.  Will ship out tomorrow.  Got it from the Ceramic Grill Store…. Always seem to have what I need at the right time at that store and all around really friendly people there!!!
    · Share on FacebookShare on Twitter
  • jimmymiller1955
    jimmymiller1955 Posts: 3
    Options
    I have been thinking seriously about buying one of these but I want to know that both the BGE and the KJ versions are waterproof before I do so.  Does anyone know if they are waterproof or just water-resistant?
    · Share on FacebookShare on Twitter
  • cmac610
    cmac610 Posts: 151
    Options
    Mark_B_Good said:
    Stormbringer said:
    CPFC1905 said:
    The rotisserie has dropped over here too.

    For comparison purposes and certainly not bringing any judgment;
    Large BGE rotisserie £275 or £500 for the roasting pack 
    Joetisseries that might or might not fit a Large BGE £253
    LetzQ Spit that might or might not fit a Large BGE £230

    Having just received a genuine set of BGE Salt and Pepper pots you know  where my allegiances lie. 
    The LetzQ fits the large perfectly I have one. Also the motor is on the left and the spit handle on the right. As I’m right handed I’m happy with my one. I thought the large LetzQ was £200 though. 
    Can you turn the ring upside down, to change the side the motor is on?
    No.
    Craig aka Cmac Cooks
    Amesbury, MA
    #BGETeamGreen #TeamArteflame #TeamBarrelProof
    XL BGE, Mini-Max, La Caja China, Arteflame Classic 40, Arteflame One 20, Arteflame Euro 20, Cotton Gin Harvester, Weber Classic, Gozney Dome, Anova wifi Sous Vide.
    · Share on FacebookShare on Twitter

Categories