Welcome to the EGGhead Forum - a great place to visit and packed with tips and EGGspert advice! You can also join the conversation and get more information and amazing kamado recipes by following Big Green Egg to Experience our World of Flavor™ at:
Want to see how the EGG is made? Click to Watch
Facebook | Twitter | Instagram | Pinterest | Youtube | Vimeo
Share your photos by tagging us and using the hashtag #BigGreenEgg.
Share your photos by tagging us and using the hashtag #BigGreenEgg.
Want to see how the EGG is made? Click to Watch
When do I turn on the PartyQ?
Options
Grillin_G_Ma
Posts: 102
Please tell me the process for using the PartyQ. I used it once last summer but it didn't maintain the temp so I did something wrong. For a low and slow, do you get the Egg to temp and then put the PartyQ on? Thanks for your help.
Comments
-
I get the egg started and when I close the dome I attach the PartyQ probe. Once I get the temp stable manually I attach the PartyQ and set the temp.They/Them
Morgantown, PA
XL BGE - S BGE - KJ Jr - HB Legacy - BS Pizza Oven - 30" Firepit - King Kooker Fryer - PR72T - WSJ - BS 17" Griddle - XXL BGE - BS SS36" Griddle - 2 Burner Gasser - Pellet Smoker -
I don't have one, but I do have a DigiQ. I usually light the lump and then install the crutch. Then I close the dome and walk away til the VOCs burn off and it reaches temp.It's probably faster to get the egg to temp manually and then install the crutch. But I'm in no hurry.
I hate it when I go to the kitchen for food and all I find are ingredients!
MichaelCentral Connecticut -
The PartyQ has a smaller fan than the DigiQ. It might work to use it to bring to temp, not sure.They/Them
Morgantown, PA
XL BGE - S BGE - KJ Jr - HB Legacy - BS Pizza Oven - 30" Firepit - King Kooker Fryer - PR72T - WSJ - BS 17" Griddle - XXL BGE - BS SS36" Griddle - 2 Burner Gasser - Pellet Smoker -
DMW said:I get the egg started and when I close the dome I attach the PartyQ probe. Once I get the temp stable manually I attach the PartyQ and set the temp.Be careful, man! I've got a beverage here.
-
My problem with the partyq is that the temp probe will swing wildly. My maverick, partyq and dome temp are all pretty steady for a few hours then the pq temp will spike 20 to 40 degrees higher while the maverick and dome have stayed steady. Fan kicks on when it really shouldn't and the temp gets too high. Any advice?
-
Same problems as you and I gave mine to Travis. I see he can use it fine.Salado TX & 30A FL: Egg Family: 3 Large and a very well used Mini, added a Mini Max when they came out (I'm good for now). Plus a couple Pit Boss Pellet Smokers.
-
s_austin_egger said:My problem with the partyq is that the temp probe will swing wildly. My maverick, partyq and dome temp are all pretty steady for a few hours then the pq temp will spike 20 to 40 degrees higher while the maverick and dome have stayed steady. Fan kicks on when it really shouldn't and the temp gets too high. Any advice?
1. Probe placement. You need an accurate temp reading. Probe should be in the "shadow" of the indirect heat, not too close to the meat, with all parts of the solid tip in the shadow and the braided line also shadowed by the platesetter. Keep this dry or it will go haywire.
2. Damper setting. The damper on the fan needs to be set to slightly starve the fire (run a bit cooler/lower temp) if there's no power to it. If it's open too much, can overshoot, especially if there's wind into the fan, if it's closed too much the fan will suck the batteries faster.
Other than that, make sure you have fresh batteries and good solid probe connections in the jack. If you still have problems, you might be setting up the vent too early or there's some equipment problem, like the probe is flaky.
If I had one of those, I'd rig up a wall wart power supply to run it off AC and error on the lean side where the fan runs more.
______________________________________________I love lamp.. -
Thanks for the tips. The strange thing is that I can have the maverick and pq probe within a half inch of each other. They will hold identical temps for two hours then get off by 30degrees.
-
s_austin_egger said:Thanks for the tips. The strange thing is that I can have the maverick and pq probe within a half inch of each other. They will hold identical temps for two hours then get off by 30degrees.
______________________________________________I love lamp.. -
Sold my DigiQ, gave away my PartyQ, do not use my Mavericks. I learned to Turbo everything and use only my Thermapen. Life is easy now.Salado TX & 30A FL: Egg Family: 3 Large and a very well used Mini, added a Mini Max when they came out (I'm good for now). Plus a couple Pit Boss Pellet Smokers.
-
I haven't used a stoker in about 8 months. I do a low n slow/turbo hybrid. Start off low, smoke, then power through the stall. Works for me.
______________________________________________I love lamp.. -
I clip my probe to the stem of the dome thermo. FwiwLBGE& SBGE———————————————•———————– Pennsylvania / poconos
-
nolaegghead said:2. Damper setting. The damper on the fan needs to be set to slightly starve the fire (run a bit cooler/lower temp) if there's no power to it. If it's open too much, can overshoot, especially if there's wind into the fan, if it's closed too much the fan will suck the batteries faster.I found that adjusting the daisy wheel is a good way to control draft through the controller when the fan isn't running. I try to aim for 1-2 pulses of the fan each minute after temp has settled in. If the daisy wheel is open too far, it will pull too much air through the fan and temp will rise out of control - and too tight will cause fan to run too much and wear batteries down.
-
nolaegghead said:s_austin_egger said:Thanks for the tips. The strange thing is that I can have the maverick and pq probe within a half inch of each other. They will hold identical temps for two hours then get off by 30degrees.that's a lot of data to fret over for a 2 cubic foot space. I assume you are using the maverick to monitor the party Q but dang- I would throw them all away if I had to deal with that. Your Egg must look like a Big Green Bomb with all those wires coming out.Use the force, Luke )Keepin' It Weird in The ATX FBTX
-
I have a PartyQ but have not seen a damper setting on it. Am I missing something or is this feature only on other controllers?twlangan said:nolaegghead said:2. Damper setting. The damper on the fan needs to be set to slightly starve the fire (run a bit cooler/lower temp) if there's no power to it. If it's open too much, can overshoot, especially if there's wind into the fan, if it's closed too much the fan will suck the batteries faster.I found that adjusting the daisy wheel is a good way to control draft through the controller when the fan isn't running. I try to aim for 1-2 pulses of the fan each minute after temp has settled in. If the daisy wheel is open too far, it will pull too much air through the fan and temp will rise out of control - and too tight will cause fan to run too much and wear batteries down.
PartyQ does not have a damper on the fan, the other larger ones do. And good advice on the DFMT settings.
They/Them
Morgantown, PA
XL BGE - S BGE - KJ Jr - HB Legacy - BS Pizza Oven - 30" Firepit - King Kooker Fryer - PR72T - WSJ - BS 17" Griddle - XXL BGE - BS SS36" Griddle - 2 Burner Gasser - Pellet Smoker -
Definitely getting the temperature close to target before using the PartyQ is key. If you don't, the fan will run too much and wear the batteries out fast. I would almost recommend a fresh set of batteries for an overnight cook.
Categories
- All Categories
- 182.8K EggHead Forum
- 15.7K Forum List
- 459 EGGtoberfest
- 1.9K Forum Feedback
- 10.3K Off Topic
- 2.2K EGG Table Forum
- 1 Rules & Disclaimer
- 9K Cookbook
- 12 Valentines Day
- 91 Holiday Recipes
- 223 Appetizers
- 516 Baking
- 2.4K Beef
- 88 Desserts
- 164 Lamb
- 2.4K Pork
- 1.5K Poultry
- 30 Salads and Dressings
- 320 Sauces, Rubs, Marinades
- 543 Seafood
- 175 Sides
- 121 Soups, Stews, Chilis
- 36 Vegetarian
- 100 Vegetables
- 313 Health
- 293 Weight Loss Forum