Big Green Egg - EGGhead Forum - The Ultimate Cooking Experience...
Welcome to the EGGhead Forum - a great place to visit and packed with tips and EGGspert advice! You can also join the conversation and get more information and amazing kamado recipes by following Big Green Egg at:

Facebook  |  Twitter  |  Instagram  |  Pinterest  |  Youtube  |  Vimeo
Share your photos by tagging us and using the hashtag #EGGhead4Life.


In Atlanta? Come visit Big Green Egg headquarters, including our retail showroom, the History of the EGG Museum and Culinary Center!  3786 DeKalb Technology Parkway, Atlanta, GA 30340.

Help w temp issue

My temp dropping and flipping between 220 and 230. Gets to 230 I close vents and keeps dropping. Gets to 220 and I open it up a little and flies back up Any suggestions

Comments

  • ChubbsChubbs Posts: 6,841
    10 degrees is not going to change much. Just sit back and enjoy a beverage and let egg do its thing. Before long you will be able to set your vents without thinking and nail your target temp.
    Columbia, SC --- LBGE 2011 -- MINI BGE 2013
  • She settled at 237. Doing ribs So that works for me Thanks
  • lousubcaplousubcap Posts: 13,784

    FYI-a little known secret that BGE does not tell you is the following-on indirect cooks (platesetter in) your dome temp will initially read around 20-40*F hotter than the temp at the cooking grid-gaps narrows the longer the dome is shut.  If not specified, cooking  temperatures reference the dome temp.  Check the calibration of your dome thermo before you start. 

    I found out the hard way with a rib cook that took forever-

    BTW-welcome aboard. 

    Louisville;  L & S BGEs, PBC, Lang 36; Burnin' wood in the neighbourhood. # 38 for the win.
  • She settled at 237. Doing ribs So that works for me Thanks
    See...... relax and it will find its sweet spot....
    Don't chase it, and the longer it has been hot, the less any change makes..
    Delta B.C. - Move over coffee, this is job for alcohol!
  • DuganboyDuganboy Posts: 1,118
    Lots of good advice above.  Most important, I think, is not chasing temps.  If your target was 220 and you were at 230 there is basically no difference.  Give the egg plenty of time to stabilize before you try adjusting the vents.
Sign In or Register to comment.
Click here for Forum Use Guidelines.