I just put my egg into the new table. Still need to add some hooks, bottle opener, etc. I used pressure treated lumber from Lowe's and sanded the hell out of it. The Kreg pocket hole jig came in handy for assembly so there are no exposed fasteners.
It's much nicer having the egg higher up. I had it sitting on the concrete patio for almost a year before I built this table.
Comments
Jon
You can use a piece of string (about 4' long, the radius of the curve) with a screw tied to one end and a pencil or sharpie tied to the other. Find the center of the table (front to back) and press the screw tip into the wood 4' away from the end you want to mark. Now just sweep the arc on the end of the table with the sharpie (maybe practice with a pencil first to make sure it's what you want).
I used a jig saw (and a steady hand) to cut along the mark then a used a random orbit sander to smooth things out. I think it makes the table look a lot better than a squared off edge (and there's a little more workspace this way)
I used the same technique to mark and cut the hole for the egg. Obviously it's a much shorter string (10.5" I believe).
Let me know if this doesn't make sense.
Small and Large BGE in Oklahoma City.
what did you finish it with?
it really looks great!
what's that Kreg pocket hole jig you speak of?
I sanded all of the lumber before I put everything together and then sanded the top surface again once it was assembled so it was really smooth board to board.
The other trick I did was to rip the edges off the boards I used for the top so they fit together tightly (the 5/4x6" decking lumber has rounded edges).
Once it was together, I finished it with Thompson's water seal honey gold tinted sealant.
Here's the link to the Kreg jig kit that I bought. It's pretty slick and was well worth the extra effort. I think Lowe's carries this as well. I know they have the screws in stock in most of the GA stores.
http://www.kregtool.com/products/pht/product.php?PRODUCT_ID=32