Focker said:

Carolina Q said:

Focker said:

Carolina Q said:

Focker said:

Today's $20 unmarked #9 Griswold, in with the overpriced small logos for $50.  $2 Flint spatula, another hidden gem. 

@Focker How can you tell that's a Gris?

The 3 digit pattern number at 1200.

Thanks. I assume they had diff patt numbers for diff pans so any 3 digits = gris? 

Skillets are 700s from what I've seen.  My unmarked Griswold #22 cornbreadstick pan is #954.  I would assume yes.

They had a Griswold marked #954 out there for $20.  I'll probably go back and bag that too.

You lucky “focker”.

Focker said:

Hit another hole today.
Schlemmertopf vintage German clay baker, $8
8 qt SS Vollrath bowl, $8
Cousances French #20 enamel skilket $8
Lodge Sportsmen Series Big Mouth Bass $10
Unmarked Wags #6, making a set with a #10 and #5...$14
Boys bagged a large Mr Potatohead.

Nice!! My brother bought me a Rommertopf clay baker very similar to that. Not familiar with the Schlemmertopf brand. It looks glazed on the inside. Mine isn't. They age beautifully! And they cook a mean pot roast. 

The Cousances skillet looks like the skillets that came with my $50 LC set. 

Focker said:

Hit another hole today.
Schlemmertopf vintage German clay baker, $8
8 qt SS Vollrath bowl, $8
Cousances French #20 enamel skilket $8
Lodge Sportsmen Series Big Mouth Bass $10
Unmarked Wags #6, making a set with a #10 and #5...$14
Boys bagged a large Mr Potatohead.

Wow! Clean livin is all I can say. Must be. Lol!

@pgprescott,
On second thought, I'll leave the wallhanger alone.

@Carolina Q,
Reston Lloyd is Romertopf is Schlemmertopf.
Further down Reston Lloyd still stands behind the old Sclemmertopfs.  I will baby it, and presoak, then add to a cold oven.  Chicken with some herb and veggies will be awesome in this pot, pork roast too.  

Picked up his pan today. Very good shape but you can tell it was used often.
Pretty light weight and very smooth cooking surface.
Have it in a big ZipLoc bag coated in oven cleaner.

Ironic this thread popped up today, I was searching for it this morning and thought it was buffaloed. 

Not a score, but I picked up a Lodge 10" Chef skillet yesterday. Sanded it, washed and seasoned last night, the way Cowboy Kent Rollins recommends. Flax Seed Oil at 325ish for 30 min x3. I managed to get that done twice last night, and was curious how it would work, and I successfully made an omlette this morning, and it did not stick.

I know Flax Seed has a bad reputation for not lasting, but I thought I would try Kent's way. Its a little different in that the oven temp is around 300/325 instead of 500. Time will tell how it works out.

I have made some serious progress the last few weeks learning how to cook on cast iron, as well as stainless steel. I cook eggs for breakfast every morning, and getting them not to stick has been very frustrating, but I think I have it down now. I have been using another Lodge skillet the last few days, but I cut the handle off so it would fit in my eggs better, and trying to do omelettes without a handle was getting unsafe. After slightly burning my hand and nearly catching my pot holder on fire, I decided it was time to get a cast with a handle. Going to keep an eye out at thrift stores for an older Griswold or something a little nicer, but this will work for now.

Kent has a couple vids about Field Company's cast iron. Anybody pick one of those up yet? 

Photo Egg said:

Cashfan said:

Ironic this thread popped up today, I was searching for it this morning and thought it was buffaloed. 

Not a score, but I picked up a Lodge 10" Chef skillet yesterday. Sanded it, washed and seasoned last night, the way Cowboy Kent Rollins recommends. Flax Seed Oil at 325ish for 30 min x3. I managed to get that done twice last night, and was curious how it would work, and I successfully made an omlette this morning, and it did not stick.

I know Flax Seed has a bad reputation for not lasting, but I thought I would try Kent's way. Its a little different in that the oven temp is around 300/325 instead of 500. Time will tell how it works out.

I have made some serious progress the last few weeks learning how to cook on cast iron, as well as stainless steel. I cook eggs for breakfast every morning, and getting them not to stick has been very frustrating, but I think I have it down now. I have been using another Lodge skillet the last few days, but I cut the handle off so it would fit in my eggs better, and trying to do omelettes without a handle was getting unsafe. After slightly burning my hand and nearly catching my pot holder on fire, I decided it was time to get a cast with a handle. Going to keep an eye out at thrift stores for an older Griswold or something a little nicer, but this will work for now.

Kent has a couple vids about Field Company's cast iron. Anybody pick one of those up yet? 

I had to run back 5-6 pages to find it.
I'm another who had bad luck with flax. Seemed to hold for a couple cooks and then started  flaking off. Had this happen with several pans. Cast and black steel. Hope you have better luck.

Did you strip it and re-season it or season it by continuing to cook in it?

Pan has a "V" on the back of handle. At first I thought it might have been added by owner. But after first round of stripping it looks more factory.

Cashfan said:

Ironic this thread popped up today, I was searching for it this morning and thought it was buffaloed. 

Not a score, but I picked up a Lodge 10" Chef skillet yesterday. Sanded it, washed and seasoned last night, the way Cowboy Kent Rollins recommends. Flax Seed Oil at 325ish for 30 min x3. I managed to get that done twice last night, and was curious how it would work, and I successfully made an omlette this morning, and it did not stick.

I know Flax Seed has a bad reputation for not lasting, but I thought I would try Kent's way. Its a little different in that the oven temp is around 300/325 instead of 500. Time will tell how it works out.

I have made some serious progress the last few weeks learning how to cook on cast iron, as well as stainless steel. I cook eggs for breakfast every morning, and getting them not to stick has been very frustrating, but I think I have it down now. I have been using another Lodge skillet the last few days, but I cut the handle off so it would fit in my eggs better, and trying to do omelettes without a handle was getting unsafe. After slightly burning my hand and nearly catching my pot holder on fire, I decided it was time to get a cast with a handle. Going to keep an eye out at thrift stores for an older Griswold or something a little nicer, but this will work for now.

Kent has a couple vids about Field Company's cast iron. Anybody pick one of those up yet? 

Back when I first got bit by the iron bug, many hardcore Griswold/Wagner guys and gals fell for the flax.  After flaking, they all stripped their entire collections and went with canola and grapeseed or lard.

Don't get me wrong, I love Cowboy Kent, but I'm not jumping on his chuckwagon here.  How did a cowboy not praise the lard???  Baffling

As for the Field Skillet, there have been negative reports here of cooking pork sausage, apparently an extremely difficult task in CI.  Maybe @DoubleEgger could advise?

Photo Egg said:

Focker said:

Photo Egg said:

Pan has a "V" on the back of handle. At first I thought it might have been added by owner. But after first round of stripping it looks more factory.

Any other markings?
Unmarked Wagners have a Times New Roman font, typewriter font.  But they also state the diameter in inches on the bottom.

Thank you. No, I don't see any other markings on the bottom at all.
It weights in right at 4 pounds. It's a 10" pan so a number 8.
Almost half pound lighter than my other old pan. The other photos are just above in this thread.

Thanks Darian.  The only thing close would be this.  You found a nice pan btw.  Some of those old pans in that era(1900-1930s) with the built-in heat ring are crazy light.  They don't feel like iron at all.

HeavyG said:

Focker said:

Cashfan said:

Ironic this thread popped up today, I was searching for it this morning and thought it was buffaloed. 

Not a score, but I picked up a Lodge 10" Chef skillet yesterday. Sanded it, washed and seasoned last night, the way Cowboy Kent Rollins recommends. Flax Seed Oil at 325ish for 30 min x3. I managed to get that done twice last night, and was curious how it would work, and I successfully made an omlette this morning, and it did not stick.

I know Flax Seed has a bad reputation for not lasting, but I thought I would try Kent's way. Its a little different in that the oven temp is around 300/325 instead of 500. Time will tell how it works out.

I have made some serious progress the last few weeks learning how to cook on cast iron, as well as stainless steel. I cook eggs for breakfast every morning, and getting them not to stick has been very frustrating, but I think I have it down now. I have been using another Lodge skillet the last few days, but I cut the handle off so it would fit in my eggs better, and trying to do omelettes without a handle was getting unsafe. After slightly burning my hand and nearly catching my pot holder on fire, I decided it was time to get a cast with a handle. Going to keep an eye out at thrift stores for an older Griswold or something a little nicer, but this will work for now.

Kent has a couple vids about Field Company's cast iron. Anybody pick one of those up yet? 

Back when I first got bit by the iron bug, many hardcore Griswold/Wagner guys and gals fell for the flax.  After flaking, they all stripped their entire collections and went with canola and grapeseed or lard.

Don't get me wrong, I love Cowboy Kent, but I'm not jumping on his chuckwagon here.  How did a cowboy not praise the lard???  Baffling

As for the Field Skillet, there have been negative reports here of cooking pork sausage, apparently an extremely difficult task in CI.  Maybe @DoubleEgger could advise?

Not only is Cowboy Kent a flax seed promoter but he also really likes the Field skillets.

I haven't noticed if Cowboy Kent has done any vids of cooking pork in a Field skillet yet.

Yeah, I love CK's Bertha and chuckwagon aporoach, and he seems like a genuinely nice guy to boot.  It was truly baffling, for him to go with the Zaino of Fe here???
He is a master with the #12 DOs though.
A recent breakfast pizza vid, he dropped the pizza on the board and you heard a loud thud, cracked me up.  The pie looked friggin great.

You'd think he'd have some vintage stuff in use for his vids???

GlennM said:

Picked up this yesterday $25

Strong work, great condition!
The pour spout on those older LC saucepots are handy.  

Focker said:

Cashfan said:

Ironic this thread popped up today, I was searching for it this morning and thought it was buffaloed. 

Not a score, but I picked up a Lodge 10" Chef skillet yesterday. Sanded it, washed and seasoned last night, the way Cowboy Kent Rollins recommends. Flax Seed Oil at 325ish for 30 min x3. I managed to get that done twice last night, and was curious how it would work, and I successfully made an omlette this morning, and it did not stick.

I know Flax Seed has a bad reputation for not lasting, but I thought I would try Kent's way. Its a little different in that the oven temp is around 300/325 instead of 500. Time will tell how it works out.

I have made some serious progress the last few weeks learning how to cook on cast iron, as well as stainless steel. I cook eggs for breakfast every morning, and getting them not to stick has been very frustrating, but I think I have it down now. I have been using another Lodge skillet the last few days, but I cut the handle off so it would fit in my eggs better, and trying to do omelettes without a handle was getting unsafe. After slightly burning my hand and nearly catching my pot holder on fire, I decided it was time to get a cast with a handle. Going to keep an eye out at thrift stores for an older Griswold or something a little nicer, but this will work for now.

Kent has a couple vids about Field Company's cast iron. Anybody pick one of those up yet? 

Back when I first got bit by the iron bug, many hardcore Griswold/Wagner guys and gals fell for the flax.  After flaking, they all stripped their entire collections and went with canola and grapeseed or lard.

Don't get me wrong, I love Cowboy Kent, but I'm not jumping on his chuckwagon here.  How did a cowboy not praise the lard???  Baffling

As for the Field Skillet, there have been negative reports here of cooking pork sausage, apparently an extremely difficult task in CI.  Maybe @DoubleEgger could advise?

Thanks for the feedback. I thought the Flax was worth a try for one pan and the new method. I am not very optimistic it will work. My other cast I did with peanut oil, but hasn't been used much. One reason I went that way is my already weak lungs took a very hard blow a few weeks ago with a respiratory illness, and heating the oven to 500 and filling the house with the smell isn't appealing right now. Need another week or two to heal up.

Made some diced potatoes last night, then pancakes and a veggie/cheese omelet this morning, and went well, very happy with it right now. Pretty excited to finally having some success after MANY, MANY messy failures with cast iron. I almost jumped for joy when an omelet didn't stick the other the other morning!!! Will keep you all posted on how it holds up. 

I'm new to Cowboy Kent (and cast iron), I think you (or somebody else here) referenced him last week and I checked him out. Watched a lot of his vids, and he likes lard, but said it can go rancid if left too long unused. I tend to think any oil will do that, but maybe not.


I like the looks of the Field Skillet, but not the price. Going to see if I continue down the CI road before investing in something like that, and look for some long term use reviews. Will probably keep an eye out at thrift stores and rummage sales for something nicer than my new lodges in the meantime.

Thanks for the warning about the pork. I have some chorizo to cook up, was going to use the new skillet. Guess I will get the teflon out for that.

pgprescott said:

I love all this iron, but is there one of those anonymous support groups for a few of you guys? I am not laughing at you, rather with you. I am that type of personality myself. Tend to overindulge in things of interest to me. LOL. 

My name is Brandon. I’ve been collecting iron for 12 years now. I have 382 pieces. 

“Hi Brandon!”

ok, maybe I’m a little jealous? 

382 pieces? That's just a starter kit.

These folks are the ones with an obsession (and a very cool collection as a result): https://thepan-handler.com/2016/06/largest-vintage-cast-iron-cookware-collection-in-the-united-states-larry-and-marg-oneil-tacoma-wa/