Anyone designed/built a wood only table? No screws, nails, or glue.

DefenseEngineer · July 2017

I've been thinking about doing a wood only construction of a table for my XL BGE. Has anyone already done this? Given the level of craftsmanship I've seen in some of these builds, I'm suspecting the answer is yes. But I can't seem to find an example.

Photo Egg · July 2017

Sh*t...I would need duct tape even with nails and screws!

larryd · July 2017

I'd like to see one done

Botch · July 2017

I've seen "trestle"-style tables built with none of the above, great for folks who move often (tables can be disassembled).
I've designed (but not yet built) a table with no nails/screws, but I can't give up the glue!

DefenseEngineer · July 2017

Another option so that the table could be easily disassembled and reassembled is no screws, nails, or glue. However, still using tie rods to hold the table together through tension and friction.

I need to think this through a bit more. I just don't want to recreate the wheel if someone already accomplished something along these lines.

JustOneOfTheGuys · July 2017

Was thinking about this when this popped into the 'old pea brain... use knockdown hardware. You know, a la IKEA. Check out Rockler or other Woodworking sites for inspiration. http://www.rockler.com/hardware/fasteners/knock-down-hardware

Fred19Flintstone · July 2017

As a woodworking hack, you can take away my nails and screws, but there's gonna be trouble if you touch my glue!

YukonRon · July 2017

With my skill level, I do not believe I would place a ceramic cooker such as a BGE with its weight, in or on, a table made of wood without glue, nails screws or any other fastener, unless it was cut as a single piece construction.
Maybe a construction idea like a wooden barrel, even though it still utilizes metal bands to retain the planks?
A wood table without the use of fasteners to support the size and weight, in my mind, would likely be massive in both size and scope due to the size of all the joints to be cut for stability and support.
I believe it can be done. Good luck.

theyolksonyou · July 2017

@YukonRon like this?

YukonRon · July 2017

It would have to be a massive stump for sure. While camping, my MM has found itself perched on many of those which you have posted.

SamIAm2 · July 2017

Might ask @Clay Q. Other than the top, I think this (My mini table, hand crafted) might be what you were thinking about. This wasn't for an XL but I'm sure he could create something similar for your size egg.

Begger · July 2017

Gravity is VERY reliable. But No, I'm not good a designer, let alone craftsman to manage such a build.
Building LIGHT might be a challenge, too.

http://www.finewoodworking.com/2015/10/06/secrets-of-japanese-joinery

I suspect the linked video may provide a clue or two.

DefenseEngineer · July 2017

SamIAm2 said:

Might ask @Clay Q. Other than the top, I think this (My mini table, hand crafted) might be what you were thinking about. This wasn't for an XL but I'm sure he could create something similar for your size egg.

Wow, that is almost exactly what I was thinking. And it's gorgeous.

SamIAm2 · July 2017

DefenseEngineer said:

SamIAm2 said:

Might ask @Clay Q. Other than the top, I think this (My mini table, hand crafted) might be what you were thinking about. This wasn't for an XL but I'm sure he could create something similar for your size egg.

Wow, that is almost exactly what I was thinking. And it's gorgeous.

Glad I could help and yes it is gorgeous. Now go forth and modify/over engineer/build.

Oh, and take pictures. We like lots of pictures!!

Anyone designed/built a wood only table? No screws, nails, or glue.

Comments

Categories