Welcome to the EGGhead Forum - a great place to visit and packed with tips and EGGspert advice! You can also join the conversation and get more information and amazing kamado recipes by following Big Green Egg to Experience our World of Flavor™ at:
Want to see how the EGG is made? Click to Watch
Facebook | Twitter | Instagram | Pinterest | Youtube | Vimeo
Share your photos by tagging us and using the hashtag #BigGreenEgg.
Share your photos by tagging us and using the hashtag #BigGreenEgg.
Want to see how the EGG is made? Click to Watch
Reverse Sear Question
chaschat99
Posts: 17
I'm planning to try a reverse sear on some steaks this weekend. This will be my first attempt. Do you cook the steaks with or without the platesetter before cranking the heat up and finishing them? I have a LBGE and a CI grate but I do not have a CI Skillet. Thank you in advance for any advise.
Comments
-
Use the platesetter to cook indirect at 225-250. Then pull the steaks at around 105-110 (for rare-mid rare) remove platesetter, crank the heat to 650-700 and sear 60 seconds per side.
Only use reverse sear on thick steaks. If it's under 1.5 inches thick just grill it direct. -
ChillyWillis said:Use the platesetter to cook indirect at 225-250. Then pull the steaks at around 105-110 (for rare-mid rare) remove platesetter, crank the heat to 650-700 and sear 60 seconds per side.
Only use reverse sear on thick steaks. If it's under 1.5 inches think just grill it direct.
Awesome! I'll will do it this weekend. Thank you! -
If you have a CI grid and a regular grid, for a reverse sear you can get away with not using the setter - that means you don't have to remove it when it is hot.
Stabilized egg at 225-250. CI grid on the fire ring, put a chunk of foil or a round drip pan on the CI grid to act as the deflector/setter. place your other grid on some bicks or whatever to get it close to the felt line. The make shift setter will work fine as the egg is not too hot and it will not be for much more than 30 minutes or so, depending on the thickness of your steaks. You now have an indirect set-up to get your steaks up to 15º below finished temp. When it is time to pull the steaks, take out the upper grid, pull the foil and open the vents. Once up to heat you are ready to sear on the CI grid.Delta B.C. - Whiskey and steak, because no good story ever started with someone having a salad! -
Thank you Skiddymarker! That is a great idea.
-
I hate handling a hot platesetter, so I will usually bank the fire in the back and then put the steaks or chops in the front so they're not over the fire. Sometimes I do this with a raises grid as well. Then when I pull them, I just do a quick take of the fire and let it come up to temp for the sear.
I do this on an XL, so there's a little more room to work with but you could do this on a L as well as long as you're not cooking lots of steaks.THANK YOU FOR YOUR ATTENTION TO THIS MATTER -
@Legume that's why I love my AR. When doing my reverse sear I just pull the whole rig and set one some fire bricks. I stoke my fire with my looftlighter, and just lift the grate with the steaks still on it right on to the fire. Very versatile tool and my best purchase for the egg.Pittsburgh, PA - 1 LBGE
-
What a great idea. Was sitting her contemplating how I was going to get the stone out. Thanks!xiphoid007 said:@Legume that's why I love my AR. When doing my reverse sear I just pull the whole rig and set one some fire bricks. I stoke my fire with my looftlighter, and just lift the grate with the steaks still on it right on to the fire. Very versatile tool and my best purchase for the egg.Two Large Eggs, 6 gal Cajun Fryer, and a MiniMax in Charlotte, NC - My New Table
Twitter: @ Bags
Blog: TheJetsFan.com -
xiphoid, can I do the same thing with my Woo2? (just purchased, used it once)
-
With a PSWoo2 (Woo for the Large with space for the platesetter), you just pick up the Woo by the handles with the platesetter still in it, and put it on a safe surface (I have a concrete patio).
Then I would just throw the steak on the coals to char...I love caveman.Judy in San Diego -
I do the same with my PSWoo2. Take the whole thing off after I hit my desired temp on the reverse sear and then jack up the temp to cook direct at around 600 and then put the cooking grate with the steaks on the fire ring. Works great!Sweet100s said:xiphoid, can I do the same thing with my Woo2? (just purchased, used it once)LBGE & MiniOrlando, FL
Categories
- All Categories
- 184K EggHead Forum
- 16.1K Forum List
- 461 EGGtoberfest
- 1.9K Forum Feedback
- 10.5K Off Topic
- 2.4K EGG Table Forum
- 1 Rules & Disclaimer
- 9.2K Cookbook
- 15 Valentines Day
- 118 Holiday Recipes
- 348 Appetizers
- 521 Baking
- 2.5K Beef
- 90 Desserts
- 167 Lamb
- 2.4K Pork
- 1.5K Poultry
- 33 Salads and Dressings
- 322 Sauces, Rubs, Marinades
- 548 Seafood
- 175 Sides
- 122 Soups, Stews, Chilis
- 40 Vegetarian
- 103 Vegetables
- 315 Health
- 293 Weight Loss Forum





