Welcome to the EGGhead Forum - a great place to visit and packed with tips and EGGspert advice! You can also join the conversation and get more information and amazing kamado recipes by following Big Green Egg to Experience our World of Flavor™ at:
Want to see how the EGG is made? Click to Watch
Facebook | Twitter | Instagram | Pinterest | Youtube | Vimeo
Share your photos by tagging us and using the hashtag #BigGreenEgg.
Share your photos by tagging us and using the hashtag #BigGreenEgg.
Want to see how the EGG is made? Click to Watch
mini max upgrade
My mini max is to heavy so I'm upgrading my side handles to aluminium ..... j/k I did it because it just looks better. I will send picture once I have it
installed 
Hermosa Beach CA
Comments
-
That's a cool idea. Standing by to see it.
Location- Just "this side" of Biloxi, Ms.
Status- Standing by.
The greatest barrier against all wisdom, the stronghold against knowledge itself, is the single thought, in ones mind, that they already have it all figured out. -
-
Sweet! Already pimping the Rutland too!? Is it the same size (amount) as a small??Slumming it in Aiken, SC.
-
-
Is that a custom handle too?Mini Max, Medium BGE, Large BGE, Lodge Cast Iron Sportsman, Digi Q II, Woo 2, AR with Oval setup
-
Does your MM have an underbite.
-
No it just has a sloppy rush job of a Rutland when I installed itTinyfish said:Does your MM have an underbite.
Yes that is a custom handle from Danny's carvingsnealcr1 said:Is that a custom handle too?
Im not sure I had an exta large that I cut down to fitJeremiah said:Sweet! Already pimping the Rutland too!? Is it the same size (amount) as a small??
Hermosa Beach CA -
Bad pic but that is the handlenealcr1 said:Is that a custom handle too?
Hermosa Beach CA -
So what did you pay for the handles?
I mean the mini max holder handles.Seattle, WA -
I used scrap material hanging around the shop but I would assume it would be about 8.00SkinnyV said:So what did you pay for the handles?
I mean the mini max holder handles.Hermosa Beach CA -
Looks like you have spacers on for both dome thermos?"I've made a note never to piss you two off." - Stike
"The truth is, these are not very bright guys, and things got out of hand." - Deep Throat -
No I like to drink so why not put those wine corks to use ....j/k Yah I put them on all my eggs once you stab one chicken and get a false read you will never do it againJohnInCarolina said:Looks like you have spacers on for both dome thermos?
Hermosa Beach CA -
Good idea - I like it!McStew said:
No I like to drink so why not put those wine corks to use ....j/k Yah I put them on all my eggs once you stab one chicken and get a false read you will never do it againJohnInCarolina said:Looks like you have spacers on for both dome thermos?
"I've made a note never to piss you two off." - Stike
"The truth is, these are not very bright guys, and things got out of hand." - Deep Throat -
Its not original I think I got it from @Smitty... I belive he used wood but I figured a cork would work and they doJohnInCarolina said:
Good idea - I like it!McStew said:
No I like to drink so why not put those wine corks to use ....j/k Yah I put them on all my eggs once you stab one chicken and get a false read you will never do it againJohnInCarolina said:Looks like you have spacers on for both dome thermos?
Hermosa Beach CA -
Very niceSalado TX & 30A FL: Egg Family: 3 Large and a very well used Mini, added a Mini Max when they came out (I'm good for now). Just given a Mini to add to the herd.
-
I like it. Pimping out the mini max.1 XXL BGE, 1 LG BGE, 2 MED. BGE, 1 MINI BGE, 1 Peoria custom cooker Meat Monster.Clinton, Iowa
-
I remember reading the question some of us had regarding the handles. Is there a solid "thick" rod that does most of the supporting and then what we see are just beauty covers? I like the upgrades! I already have the Rutland but, I figure I'll change it once the factory gasket begins to falter. Taking it off before you cook on it probably makes it a heck of a lot easier to remove.LBGE 2013 & MM 2014Die Hard HUSKER & BRONCO FANFlying Low & Slow in "Da Burg" FL
-
these are solid rod the factory OEM part is tubing with a nut at the end.NPHuskerFL said:I remember reading the question some of us had regarding the handles. Is there a solid "thick" rod that does most of the supporting and then what we see are just beauty covers? I like the upgrades! I already have the Rutland but, I figure I'll change it once the factory gasket begins to falter. Taking it off before you cook on it probably makes it a heck of a lot easier to remove.Hermosa Beach CA -
did you build your table ? I like it
-
Thanks man yah I had nothing to do for a couple of months and came up with ityogi84 said:did you build your table ? I like itHermosa Beach CA -
I have been using the MM just about every other day and I was thinking I was consuming a large amount of lump. So I decided to go over everything and discovered the daisy wheel was not fitting properly so a slight mod was needed.BEFORE MOD
open hole by 1/8 to take out the imperfection in the original
Flush fitting now
Hermosa Beach CA
Categories
- All Categories
- 184K EggHead Forum
- 16.1K Forum List
- 461 EGGtoberfest
- 1.9K Forum Feedback
- 10.5K Off Topic
- 2.4K EGG Table Forum
- 1 Rules & Disclaimer
- 9.2K Cookbook
- 15 Valentines Day
- 118 Holiday Recipes
- 348 Appetizers
- 521 Baking
- 2.5K Beef
- 90 Desserts
- 167 Lamb
- 2.4K Pork
- 1.5K Poultry
- 33 Salads and Dressings
- 322 Sauces, Rubs, Marinades
- 548 Seafood
- 175 Sides
- 122 Soups, Stews, Chilis
- 40 Vegetarian
- 103 Vegetables
- 315 Health
- 293 Weight Loss Forum