Stepbrother

I still wish it was red. That way you could beat it when you are angry with it.

Nice score - avoid lava temps and it will last for years. What are your plans to "mount" it, table, existing nest, adding mates?

If you have a welder, get your hand on some 1/4 rod and make a spider for a pizza stone.  If you don't have a welder, go to Harbor Freight and fork out the $80 for a cheap MIG.  Get some flux core.  Pick up a 20% off coupon from a flyer or magazine like popular mechanics.

Nice score. Plate setter should be easy. 2 pieces of aluminum flat bar crossed and clay saucer.

Whatever you do don't mount it when its hot. You'll burn your junk.

henapple said:

I don't know that I've seen a spider... But will Google it. I have a welder that'll help me. Will any pizza stone work?

May crack... at Home Depot they have a 'grill stone', meant to take the direct heat.  Welder?  Just need some rebar and a hammer!

What's the edge to edge diameter of the stock grid? 12.5"? If so, probably a little too small to sit properly on a Small Woo.

I would bet the Woo would fit but be just a bit too large for the stock grid. Otherwise, something like this (Woo & 8.5" pizza stone) would be a good set up:

Edge to edge diameter of my Small Woo is 12.25"

henapple said:

Ok... Good news is that the BGE small ci grid and ps work damn near perfect. The exterior is stained and has a small chip. The fire ring and box are cracked. Can I jb weld the cracks and use a high temp paint for the exterior?

Yeah, JB weld will hold up to the heat and they used to paint Kamados...just get a high heat paint.  Obviously don't use powder coat paint - it'll burn off fast.

Do purple and only play Jimi Hendrix when smoking on it. Grab some Abita Purple Haze and you'll be set for life.

don't forget the Turbo Dog

It's delicious beer henapple. Try it! Broaden those horizons from the hipster PBR 

It doesn't taste the way it looks.....

Looks awesome Henapple