Share your photos by tagging us and using the hashtag #BigGreenEgg.
Want to see how the EGG is made? Click to Watch
Homemade Sausage Tips
Amazon. Any tips I should know about before attempting my first batch possibly this weekend? I plan to use fresh hog casings from a local butcher shop and pork butt. I will probably try Ifalian first, then branch out from there.
Thanks for any help.
Comments
-
Cut meat into 1 inch cubes and freeze for 20 to 30 minutes before grinding helps.Every day is a bonus day and every meal is a banquet in Winter Springs, Fl !
-
Throw in any metal parts of your grinder as well. Heat is your enemy when making sausage.
Here is a simple and easy Hot Italian Sausage Recipe if you want to go that route (@Dyal_SC shared this one with me).
Hot Italian Sausage
5-lbs pork
1-cup cold red wine
1-cup chopped fresh parsley
5-tsp salt
1-tbsp garlic powder or-4 to 5 garlic cloves, minced
1-tbsp fresh ground pepper
3-tsp cayenne
5-tbsp fennel seed (the one change I made was reducing it to 4 and then grinding in a spice grinder)
2-tsp crushed red pepper
5-tbsp paprikaRowlett, Texas
Griffin's Grub or you can find me on Facebook
The Supreme Potentate, Sovereign Commander and Sultan of Wings
-
I have found that toasting your fennel seed can really make a difference.
-
I just bought a sausage making book only because the index shows Texas Hot Links. I grew up on those and consider them the best in the world.__________________________________________Dripping Springs, Texas.Just west of Austintatious
-
The KitchenAid is notorious for leaving metal and plastic shavings in your ground meat. Look at the meat carefully. I have a Kitchen Aid and I have used the meat grinder. In my opinion it basically sucks, but if it is all you have just keep your eye on the output for shavings. I only used it once and then sold it at a garage sale. We have a Hobart 1 hp grinder that we have been using for years. Normally we make at least 100 lb batches but it is a pain to pull out for a 4-5 lb quickie batch. I use a hand grinder we have had for decades for the small batches.Simple ingredients, amazing results!
-
SamFerrise said:The KitchenAid is notorious for leaving metal and plastic shavings in your ground meat. Look at the meat carefully. I have a Kitchen Aid and I have used the meat grinder. In my opinion it basically sucks, but if it is all you have just keep your eye on the output for shavings. I only used it once and then sold it at a garage sale. We have a Hobart 1 hp grinder that we have been using for years. Normally we make at least 100 lb batches but it is a pain to pull out for a 4-5 lb quickie batch. I use a hand grinder we have had for decades for the small batches.Here is a link from a couple of years ago showing it:
-
take the small grinding plate and put it into the back of the drawer, its pretty useless,too small for sausage. cut the meat into strips, they feed better than the cubes. never had the metal and plastic filings from the grinder here. thouraghly rinse the casings in cold water. if youve never done it before, stuffing is easier with two people, and have a pin ready to prick any airbubbles that deleope
fukahwee maineyou can lead a fish to water but you can not make him drink it -
I love my KA grinder and haven't had any problems with it. I know many who make sausage and fresh ground beef without any problems with it. Now I only use it for up to 20 pounds, but then again I don't have an army to feed.
-
Village Idiot said:I just bought a sausage making book only because the index shows Texas Hot Links. I grew up on those and consider them the best in the world.
Rowlett, Texas
Griffin's Grub or you can find me on Facebook
The Supreme Potentate, Sovereign Commander and Sultan of Wings
-
-
Sausage making is a great hobby/off shoot from Smoking/Grilling. I have been making sausages for the last 4-5 years and have a blast doing it. I started with a KA grinder and stuffer kit. The grinder works OK, but stuffing with the KA can be a real pain. That said, there is nothing wrong with Brat patties or Hot Link Patties. I too used the KA grinder up to about 20# max for grinding. My second purchase was a 5# vertical stuffer, and I would not be caught dead without a dedicated stuffer. It makes stuffing so much easier. I recently upgraded to a #8 grinder...holy cow does that thing chew up and spit out the meat. I can grind out 20# in 5-10 minutes.Keeping all your parts as cold as possible is very key to the process no matter what equipment you use. You may want to check out Home Sausage Making and Charcuterie:The Craft of Salting, Smoking and Curing as great resource books for techniques and recepies.Love smoking chicken...but they are hard to keep lit ;-) http://daveyrayland.wordpress.com/ Small Egg / Weber OTG 22" / CharGriller Trio / Masterbuilt 30" Electric
-
Thanks everyone for the suggestions. Looks like I will have a good deal of trial and error agead. I also have an antique grinder that I will try as well. I guess after I get my feet wet I can graduate to more sophisticated equipment. Hopefully by the end of the week I will have some sausages to post pics of!
-
Village Idiot said:
I just bought a sausage making book only because the index shows Texas Hot Links. I grew up on those and consider them the best in the world.
Ordered!
-
when you make your ground meat and season it, fry a little patty to see if the seasoning is enough before you put it into the casing, you can always add, it's hard to remove
-
I'll throw another tip - watch You Tube videos. There are some good/some not so good, but I find it helps to see a person using the stuffing.
I like this one:
http://www.youtube.com/watch?v=vlZ6X2G-mxo
http://www.youtube.com/watch?v=Mj51Sg5_FS8
and this one - just the right amount of realism (swearing) in these videos.
Toronto, Canada
Large BGE, Small BGE
-
Makes great sense. Thanks!Lex said:when you make your ground meat and season it, fry a little patty to see if the seasoning is enough before you put it into the casing, you can always add, it's hard to remove
-
BigWader said:
I'll throw another tip - watch You Tube videos. There are some good/some not so good, but I find it helps to see a person using the stuffing.
I like this one:
http://www.youtube.com/watch?v=vlZ6X2G-mxo
http://www.youtube.com/watch?v=Mj51Sg5_FS8
and this one - just the right amount of realism (swearing) in these videos.
We think alike. YouTube is such a great resource that is often overlooked. I have done some searches on it, but haven't seen these videos. Thanks for. The tip!
-
@Griffin @fishlessman and others who are making sausage regularly - my question is how much "trimming" are you doing on the buts? do you seam out the "silverskin" between sections of muscle, or does it grind easily and leaves no residual in your sausage?
To date I've used store bought ground and am jumping into grinding.
Toronto, Canada
Large BGE, Small BGE
-
BigWader said:
@Griffin @fishlessman and others who are making sausage regularly - my question is how much "trimming" are you doing on the buts? do you seam out the "silverskin" between sections of muscle, or does it grind easily and leaves no residual in your sausage?
To date I've used store bought ground and am jumping into grinding.
Barbecue may not be what brings world peace, but it has to be a good place to start -Anthony Bourdain -
Depends on my mood. If I'm being picky, I'll cut out some of the bigger parts of silverskin, but I wouldn't sweat it too much. I've been in a hurry before and didn't bother to trim any of it and it was fine.
Stopped by Academy on the way home from work yesterday and picked up some 21mm collagen casings and some 1 1/2 by 12" fibrous casings. I see snack sticks and summer sausage in my future this weekend if I have time. And if I get my Large back from my parents tonight....
Rowlett, Texas
Griffin's Grub or you can find me on Facebook
The Supreme Potentate, Sovereign Commander and Sultan of Wings
-
Got 10 lbs of pork butt yesterday and going to do Smoked Polish Sausage - from Sausage Maker.com /Rytek Kutas on Saturday.
Toronto, Canada
Large BGE, Small BGE
-
It takes a bit of effort to make your own sausage, but it is so well worth the effort. Much better than store bought. Looking forward to seeing your Smoked Polish Sausage @BigWader.
Rowlett, Texas
Griffin's Grub or you can find me on Facebook
The Supreme Potentate, Sovereign Commander and Sultan of Wings
-
I am looking for a good attachment for my kitchenaid stand mixer for grinding and tubing sausage. Is there one that works better than others?
Columbia, SC --- LBGE 2011 -- MINI BGE 2013 -
You really have 2 that are available new.This thing from KA:Or this thing by Chefs Choice:The are $50 and $150 respectively. The sausage stuffer is $10 bucks more.
-
The other option is to look for an old Hobart attachment on Ebay for around $100. This is my plan.
-
I like running a little piece of bread through the grinder to help push out the residual sausage. The little bit of bread won't mess up your flavor profile...
Also don't use the provided wrench to tighten the nut when assembling.. Hand snug is enough....
Dry your grinding plates thoroughly so that they don't rust on you.
Good luck and enjoy yourself! -
Eggcelsior said:You really have 2 that are available new.
Is the Chef choice one better then the KA? Does the size of your KA mixer affect how well the attachments work? I have heard bad things about the KA mixer/grinder attachment. Is it because people have the less powerful motor in the home version verses the larger motor in the professional series? -
It's all metal, so I would say yes in that department. I don't know if it is $100 better.What mixer do you have? This could make a difference. Mostly I have heard that you need to go slow and partially freeze the meat for 20-30 minutes because the connective tissue can gum up the machine. There is no reverse option.The price difference is mostly why I am looking for a Hobart one. They used to make KA mixers(the ones that gave KA it's reputation), so that's why they are compatible. They last forever. If you go on ebay the line is always " this is 70 years old and was my grandmothers. runs like new". Plus, if you don't like it, you are almost guaranteed to recoup your money by relisting it. They are very popular.
-
Eggcelsior said:It's all metal, so I would say yes in that department. I don't know if it is $100 better.What mixer do you have?
-
@MikeP624 - I went stand alone grinder. ebay - $70 - delivered. Also check out Mercantile Station. Really good reviews on their grinder. Not too spendy.
Toronto, Canada
Large BGE, Small BGE
Categories
- All Categories
- 182.8K EggHead Forum
- 15.7K Forum List
- 459 EGGtoberfest
- 1.9K Forum Feedback
- 10.3K Off Topic
- 2.2K EGG Table Forum
- 1 Rules & Disclaimer
- 9K Cookbook
- 12 Valentines Day
- 91 Holiday Recipes
- 223 Appetizers
- 516 Baking
- 2.4K Beef
- 88 Desserts
- 165 Lamb
- 2.4K Pork
- 1.5K Poultry
- 30 Salads and Dressings
- 320 Sauces, Rubs, Marinades
- 543 Seafood
- 175 Sides
- 121 Soups, Stews, Chilis
- 36 Vegetarian
- 100 Vegetables
- 313 Health
- 293 Weight Loss Forum