Best Adhesive or Glue for New Gasket

3M Super 77 applied kind of heavy to both the gasket and the egg.  Let it dry about 5-10 minutes before joining the 2 parts.  Spray the 77 on the gasket, but for the egg I would spary into a cup and paint it on. 

http://www.amazon.com/Permatex-80697-Copper-Spray-A-Gasket-Sealant/dp/B000HBNUDQ/ref=pd_sim_auto_4

 

Like this?

If you're asking me, regarding the Permatex, then no, like this:

http://www.amazon.com/Permatex-81878-12PK-Maximum-Temperature-Silicone/dp/B001REZA1W/ref=sr_1_2?s=automotive&ie=UTF8&qid=1336166328&sr=1-2

BTW, you'll see that it says "gasket maker" on the tube, so it's made to actually *be* a gasket, as opposed to being a gasket adhesive, so it just stands to reason that, if ya can use it as a gasket for parts on yer car, ya can use it as a gasket for the Egg :P

that amazon link is for a case.  might wanna buy just one
( i know, i know, you were just showing us... >-   but some dude WAS going to see that $46 dollar price and think it was for one tube ) )

hahahahhaah... dang... yes... it seems it was for a package of 12... unless ya wanna do SEVERAL Eggs!!! )   

Though, on a serious note, anyone who has done this - how many tubes does it take for a Large Egg??

P.S.  here's the link if ALL you are interested in is just ONE puny widdle tube: 

http://www.amazon.com/Permatex-81878-Sensor-Ultra-Copper/dp/B0002UEOPA/ref=sr_1_1?ie=UTF8&qid=1336167949&sr=8-1

 

half a tube. gave the rest to a buddy who did his with it (we both glued rutlands, didn't make actual gaskets)