Share your photos by tagging us and using the hashtag #BigGreenEgg.
Want to see how the EGG is made? Click to Watch
How a country boy improvises when he is too cheap to buy a Blackstone.
Got a Lodge platter, seasoned it well, pulled out the old Weber Spirit that has not been used in at least two years, cleaned up the Weber, ran the inner parts through the dishwasher (upsetting the wife at the same time), scrubbed and re-seasoned the cast iron grates on the Weber then today made this blackened steak.
In planning on getting a BS, I ordered the Zenware griddle tools and already had them there.
The steak is a big sirloin my wife picked up on sale yesterday. Coated it with blackening seasoning and butter, got the Lodge platter really hot and tossed it on. About three minutes per side, then took off the steak and put on the veggies right in the drippings in the platter.
This was good, and fun too. Now that they have come out with the 22 inch BS, I might just break down and get it, but for now, I am gonna try using the Lodge platter some more.
Comments
-
-
-
-
-
Back yard genius. The Lodge LDP3 also works on the gasser for a small "flat top" cook.Delta B.C. - Whiskey and steak, because no good story ever started with someone having a salad!
-
That's all a Blackstone is. A gasser with a flattop. Go to a steel yard or scrap metal dealer and pick up a piece of 1/4" A36 steel plate and place it over your gasser cooking grate. Voilà...Blackstone!
If I only had a gasser. I have to make do with charcoal...
I don't bother though. I think I've only used this setup once. I'd definitely do it if I had a gasser!
Nice looking steak!! I like the blackening idea.I hate it when I go to the kitchen for food and all I find are ingredients!
MichaelCentral Connecticut -
IDK, veggies, grease, would be everywhere but on the griddle, sauteing on a slab of A36. The side walls, trough, and trap are really nice at keeping things under control. I used my Baking Steel as a griddle once, quickly moving on to a better tool, BS.BrandonQuad Cities
"If yer gonna denigrate, familiarity with the subject is helpful." -
Focker said:IDK, veggies, grease, would be everywhere but on the griddle, sauteing on a slab of A36. The side walls, trough, and trap are really nice at keeping things under control. I used my Baking Steel as a griddle once, quickly moving on to a better tool, BS.
I hate it when I go to the kitchen for food and all I find are ingredients!
MichaelCentral Connecticut -
Skiddymarker said:Back yard genius. The Lodge LDP3 also works on the gasser for a small "flat top" cook.
-
Carolina Q said:Focker said:IDK, veggies, grease, would be everywhere but on the griddle, sauteing on a slab of A36. The side walls, trough, and trap are really nice at keeping things under control. I used my Baking Steel as a griddle once, quickly moving on to a better tool, BS.
Then, maybe the BS 22 except we are trying the Dave Ramsey thing and working on paying down some debt, so it is hard to justify spending when we are trying to save and reduce debt. If I have the debt snowball thing worked out, we should be out from under several debts including house, car and a couple pieces of evil plastic in about three years. Then, with no debt, everything will probably taste better! -
Carolina Q said:That's all a Blackstone is. A gasser with a flattop. Go to a steel yard or scrap metal dealer and pick up a piece of 1/4" A36 steel plate and place it over your gasser cooking grate. Voilà...Blackstone!
If I only had a gasser. I have to make do with charcoal...
I don't bother though. I think I've only used this setup once. I'd definitely do it if I had a gasser!
Nice looking steak!! I like the blackening idea.
The blackened steak was really good. Great flavor. -
THEBuckeye said:Good ol' 'merican ingenuity!
-
@epcotisbestThat steel cost me about $12 from a steel yard that has a "Bargain Barn" where they sell cutoffs and other surplus for $1/lb. I bought it with the intention of cutting it to 14" diameter to fit my egg. Discovered it fit the Weber perfectly and realized it also fit nicely in my oven. Never did cut it.
I hate it when I go to the kitchen for food and all I find are ingredients!
MichaelCentral Connecticut -
Carolina Q said:@epcotisbestThat steel cost me about $12 from a steel yard that has a "Bargain Barn" where they sell cutoffs and other surplus for $1/lb. I bought it with the intention of cutting it to 14" diameter to fit my egg. Discovered it fit the Weber perfectly and realized it also fit nicely in my oven. Never did cut it.
-
So my wife is out of town on a business trip and I had the leftover blackened steak with onions, peppers and mushrooms for dinner tonight. It was even better tonight than fresh off the griddle.
I don't know if it was because all the spices had time to really sink into the steak and veggies or what, but this was so good reheated. I am tempted to do it again and just put it all up and wait until the next day. Now I know that would be silly, to make something specifically with leftover in mind, but I have done silly things before. -
LBGE 2013 & MM 2014Die Hard HUSKER & BRONCO FANFlying Low & Slow in "Da Burg" FL
Categories
- All Categories
- 183.3K EggHead Forum
- 15.8K Forum List
- 460 EGGtoberfest
- 1.9K Forum Feedback
- 10.4K Off Topic
- 2.2K EGG Table Forum
- 1 Rules & Disclaimer
- 9K Cookbook
- 12 Valentines Day
- 91 Holiday Recipes
- 223 Appetizers
- 517 Baking
- 2.5K Beef
- 88 Desserts
- 167 Lamb
- 2.4K Pork
- 1.5K Poultry
- 32 Salads and Dressings
- 320 Sauces, Rubs, Marinades
- 544 Seafood
- 175 Sides
- 121 Soups, Stews, Chilis
- 38 Vegetarian
- 102 Vegetables
- 315 Health
- 293 Weight Loss Forum