Welcome to the EGGhead Forum - a great place to visit and packed with tips and EGGspert advice! You can also join the conversation and get more information and amazing kamado recipes by following Big Green Egg to Experience our World of Flavor™ at:
Want to see how the EGG is made? Click to Watch
Facebook | Twitter | Instagram | Pinterest | Youtube | Vimeo
Share your photos by tagging us and using the hashtag #BigGreenEgg.
Share your photos by tagging us and using the hashtag #BigGreenEgg.
Want to see how the EGG is made? Click to Watch
Fire Starter Placement & Looftlighter Lighting Tool
Options
Comments
-
For high temp cooks, I like to light in 3-4 spots. Either with more firestarters, or with the torch.
-
More fire starters(12-8-4 on clockface) or stoke the fire by moving air into the bottom vent. You can accomplish this with a leaf blower, shop vac, or a barbie hair dryer.
-
All I can add to Eggcelsior's post is this.....if you are gonna stick a leaf blower up to the bottom vent.....be prepared for a LOT of ash to be blown everywhere! I have tried it a time or two. I would make sure to clean out as much ash as you can before trying the leaf blower.
-
Forgot about that part. Egg St. Helens
-
Hose down everything, open a cold beer, then inject the business end of the leaf blower into the bottom vent of the egg. After it reaches the temp equivalent to the surface of the sun, blast the ash off everything with said leaf blower. ta-da! Wait for good smoke, don't tell your insurance agent, and you're ready to party.
______________________________________________I love lamp.. -
I was wondering what the ash situation would be like with the leaf blower mod...#1 LBGE December 2012 • #2 SBGE February 2013 • #3 Mini May 2013A happy BGE family in Houston, TX.
-
I guess i'm old fashion. I'm fine with 2-3 wax starters and wait the 15-30 min to get to temp
-
So I tried to get the temp way up last night and maxed out at about 500. Cleared the holes in the firebox. Started the fire with 2 Weber cubes under a chimney full of lump ( B&B oak), then dumped it out over the charcoal when it was all completely lit. Hit 400F pretty easily. Raked the coals a couple of times and gradually got up to 500F and maxed out. I had even set up a small fan to blow air into the intake.Even poked the holes in the charcoal grate from below with a wiggle rod a few times.Couple of reasons why I think it wouldn't go any higher:- its been raining a lot recently, and although the lump was under cover (not in a sealed bin though), I think it may have been damp.-Used the bottom half of a bag of lump, so there were ALOT of little pieces, instead of the bigger chunks found in the top half of the bag. The lump seemed to be packed in too tight, without enough space for airflow.-The fan was set on low.- I filled the lump up to the top of the firebox. I may need to fill to the top of the fire ring next time.I'm going to get a High Que type grate to replace the stock cast iron one. Anybody have any other tips not already mentioned in the posts above? Thanks.#1 LBGE December 2012 • #2 SBGE February 2013 • #3 Mini May 2013A happy BGE family in Houston, TX.
-
@caliking: you didn't mention the position of the daisy wheel, or the bottom vent. For over 350, I just take the DW off. As farr as small pieces, they get just as hot as large ones. like you said, just try not to pack them in. Mix them with some Biggies from the next bag.Bx - > NJ ->TX!!!All to get cheaper brisket!
-
+1 on the the High Que. It also could have been the lump. With my High-Que, it zooms to temp. I'm nuclear in no time once the lump is lit.
-
I have only used a loof and love it. The only fault I would say is the button A better designed dead means switch would be an improvement.
-
wolfsburg18 said:I have only used a loof and love it. The only fault I would say is the button A better designed dead means switch would be an improvement.
______________________________________________I love lamp.. -
tazcrash said:@caliking: you didn't mention the position of the daisy wheel, or the bottom vent. For over 350, I just take the DW off. As farr as small pieces, they get just as hot as large ones. like you said, just try not to pack them in. Mix them with some Biggies from the next bag.Sorry - was going for max temp so DW was off and bottom intake was wide open. I used the DW once but usually cook without it. It confuses me.For the future I'll pick the bigger pieces of lump out of the bag first and put them in vs just pouring it into the firebox. Any benefit to lighting from the bottom of the pile vs the top?#1 LBGE December 2012 • #2 SBGE February 2013 • #3 Mini May 2013A happy BGE family in Houston, TX.
-
caliking said:tazcrash said:@caliking: you didn't mention the position of the daisy wheel, or the bottom vent. For over 350, I just take the DW off. As farr as small pieces, they get just as hot as large ones. like you said, just try not to pack them in. Mix them with some Biggies from the next bag.Sorry - was going for max temp so DW was off and bottom intake was wide open. I used the DW once but usually cook without it. It confuses me.For the future I'll pick the bigger pieces of lump out of the bag first and put them in vs just pouring it into the firebox. Any benefit to lighting from the bottom of the pile vs the top?
______________________________________________I love lamp.. -
caliking said:So I tried to get the temp way up last night and maxed out at about 500. Cleared the holes in the firebox. Started the fire with 2 Weber cubes under a chimney full of lump ( B&B oak), then dumped it out over the charcoal when it was all completely lit. Hit 400F pretty easily. Raked the coals a couple of times and gradually got up to 500F and maxed out. I had even set up a small fan to blow air into the intake.Even poked the holes in the charcoal grate from below with a wiggle rod a few times.Couple of reasons why I think it wouldn't go any higher:- its been raining a lot recently, and although the lump was under cover (not in a sealed bin though), I think it may have been damp.-Used the bottom half of a bag of lump, so there were ALOT of little pieces, instead of the bigger chunks found in the top half of the bag. The lump seemed to be packed in too tight, without enough space for airflow.-The fan was set on low.- I filled the lump up to the top of the firebox. I may need to fill to the top of the fire ring next time.I'm going to get a High Que type grate to replace the stock cast iron one. Anybody have any other tips not already mentioned in the posts above? Thanks.
-
I totally agree with this. I wait till the fire is roaring. 15+ mins be fore touching anything for a high temp cook.caliking said:So I tried to get the temp way up last night and maxed out at about 500. Cleared the holes in the firebox. Started the fire with 2 Weber cubes under a chimney full of lump ( B&B oak), then dumped it out over the charcoal when it was all completely lit. Hit 400F pretty easily. Raked the coals a couple of times and gradually got up to 500F and maxed out. I had even set up a small fan to blow air into the intake.Even poked the holes in the charcoal grate from below with a wiggle rod a few times.Couple of reasons why I think it wouldn't go any higher:- its been raining a lot recently, and although the lump was under cover (not in a sealed bin though), I think it may have been damp.-Used the bottom half of a bag of lump, so there were ALOT of little pieces, instead of the bigger chunks found in the top half of the bag. The lump seemed to be packed in too tight, without enough space for airflow.-The fan was set on low.- I filled the lump up to the top of the firebox. I may need to fill to the top of the fire ring next time.I'm going to get a High Que type grate to replace the stock cast iron one. Anybody have any other tips not already mentioned in the posts above? Thanks.Anderson, SC
XL BGE, Father's Day Gift 2012 (Thanks Fam!!!)Webber Kettle and Webber Summit GasserWant List: Thermapen, Small BGE, Wok, Adjustable Rig, Food Saver, More $ -
Ok. I thought stirring the coals might loosen them up. The temp actually bumped 50F each time I did it. Do you leave the dome open for a while when lighting up?#1 LBGE December 2012 • #2 SBGE February 2013 • #3 Mini May 2013A happy BGE family in Houston, TX.
-
nolaegghead said:Hose down everything, open a cold beer, then inject the business end of the leaf blower into the bottom vent of the egg. After it reaches the temp equivalent to the surface of the sun, blast the ash off everything with said leaf blower. ta-da! Wait for good smoke, don't tell your insurance agent, and you're ready to party.
Categories
- All Categories
- 182.7K EggHead Forum
- 15.7K Forum List
- 459 EGGtoberfest
- 1.9K Forum Feedback
- 10.3K Off Topic
- 2.2K EGG Table Forum
- 1 Rules & Disclaimer
- 9K Cookbook
- 12 Valentines Day
- 91 Holiday Recipes
- 223 Appetizers
- 516 Baking
- 2.4K Beef
- 88 Desserts
- 164 Lamb
- 2.4K Pork
- 1.5K Poultry
- 30 Salads and Dressings
- 320 Sauces, Rubs, Marinades
- 543 Seafood
- 175 Sides
- 121 Soups, Stews, Chilis
- 35 Vegetarian
- 100 Vegetables
- 313 Health
- 293 Weight Loss Forum