Share your photos by tagging us and using the hashtag #BigGreenEgg.
Want to see how the EGG is made? Click to Watch
Cleaning Gears.. mixer
so that is my problem. if any of you out there have had this problem please give me some ideas. i know this is sorta ot but i don't go to the ot forum and i am sure there are others like me. and i wanted some good exposure to this question seeing as i spent $499 on this thing 6 years ago and do not have that kind of money these days.
thanks
happy eggin
TB
Anderson S.C.
"Life is too short to be diplomatic. A man's friends shouldn't mind what he does or says- and those who are not his friends, well, the hell with them. They don't count."
Tyrus Raymond Cobb
Comments
-
Warm-Hot water with LOTS of DAWN dighwashing liquid.Soak,wash,rinse, relube, reassemble.You'll get better answers but that is what I would use.Dawn cuts grease really well.HTH!
-
not knowing the configuration and ease of access but how about using either a heat gun or even a good hair dryer to melt the grease and let gravity remove it? OTOH I'd probably have been like your Dad, soak that sucker in gasoline! :laugh:
-
Do you smoke? If not, listen to your dad. He knew what he was talking about.
-
-
that is funny i like hoss's answer so far the best but thanks ron..
happy eggin
TB
Anderson S.C.
"Life is too short to be diplomatic. A man's friends shouldn't mind what he does or says- and those who are not his friends, well, the hell with them. They don't count."
Tyrus Raymond Cobb
-
yea i am not sure using gas around my family's food. if it were just me they would already be in gas
happy eggin
TB
Anderson S.C.
"Life is too short to be diplomatic. A man's friends shouldn't mind what he does or says- and those who are not his friends, well, the hell with them. They don't count."
Tyrus Raymond Cobb
-
hi pal!!
it has been awhile since i spoke to you
hope you are wellhappy eggin
TB
Anderson S.C.
"Life is too short to be diplomatic. A man's friends shouldn't mind what he does or says- and those who are not his friends, well, the hell with them. They don't count."
Tyrus Raymond Cobb
-
sorry i forgot to reply to you. well when i started cleaning the parts to put in the dishwashing solution i found my problem. sheared a diffrent gear not the one i ordered
so it is on the shelf for another weekendhappy eggin
TB
Anderson S.C.
"Life is too short to be diplomatic. A man's friends shouldn't mind what he does or says- and those who are not his friends, well, the hell with them. They don't count."
Tyrus Raymond Cobb
-
I would use gasoline. Gasoline evaporates and only leaves its impurities behind. After the gas clean then clean the residue off with the alcohol and there should be no contamination issues with your mixer.This is the greatest signature EVAR!
-
RATS!!! I hate that for ya!It happens to me ALL the time! :(
-
Starting fluid is good too.And the can is pressureized so it'll blast it out of nooks and crannys.That's all Gunscrubber is,high priced starting fluid.
-
Very ironically, and coincidentally, this morning I was on the Cooks Illustrated forum reading about the sad stories of some folks with plastic gear drive problems.
(Nobody mentioned how to clean out the old grease though)
It's hard to get an inkling of how many people this actually happens to, but it seemed fairly common.
I'm bumming. :( Now I'm worried about mine, after reading all the stores, about folks mixing dough...
I do know my grandmothers (from the 1940's or 50's) still works though. Of course I gave it to my brother! -
that makes alot of sense i hope we will get many perspectives on this. using gas sounds simple enough but i wonder if mike in abita could confirm the validility of everything evaporating except the impurities....
my wife just walked by and said to use a cheap half gallon of vodka :blink:happy eggin
TB
Anderson S.C.
"Life is too short to be diplomatic. A man's friends shouldn't mind what he does or says- and those who are not his friends, well, the hell with them. They don't count."
Tyrus Raymond Cobb
-
i did this iver a couple years of misreading a wheat bread recepie. and a portugese sweet bread that was very thick and the parts are relativily inexpensive. the grease was more expensive but they gave me enough grease to lube a hundred ka mixers
happy eggin
TB
Anderson S.C.
"Life is too short to be diplomatic. A man's friends shouldn't mind what he does or says- and those who are not his friends, well, the hell with them. They don't count."
Tyrus Raymond Cobb
-
well you ought to be good at fixing these things :laugh:
i tried to use the dawn to clean my hands but was unsuccessful so i have not cleaned the parts yet. and will proabably look for another way... sorry that was a gtood idea but i figured if it could not clean my hands then these gears would be worse... thanks for the thoughthappy eggin
TB
Anderson S.C.
"Life is too short to be diplomatic. A man's friends shouldn't mind what he does or says- and those who are not his friends, well, the hell with them. They don't count."
Tyrus Raymond Cobb
-
Sorry,It was a shot.The starting fluid should surley work.
-
with my wife's health issues i am leaning away from using petrolium products
happy eggin
TB
Anderson S.C.
"Life is too short to be diplomatic. A man's friends shouldn't mind what he does or says- and those who are not his friends, well, the hell with them. They don't count."
Tyrus Raymond Cobb
-
I understand.You may Google organic degreasers????
-
i checked the google sites at least 10 of them but did not see anything i could just go out and buy.. i was hoping for creative answers and have go several of them. but the wife just chimed in and said why not go to the resturant depot tomorrow :blink:
so that is where i am at so far tonighthappy eggin
TB
Anderson S.C.
"Life is too short to be diplomatic. A man's friends shouldn't mind what he does or says- and those who are not his friends, well, the hell with them. They don't count."
Tyrus Raymond Cobb
-
Great idea,Wiffey! Good luck!
-
I can't see how gasoline would have any ill affect. All the parts are inside the casing anyway. Use it to clean the crud, then just wash off whatever residue is left with dish soap. Simple Green is pretty good too.
However, if these gears are plastic and you decide to use gas, I would suggest you clean one of the broken parts first - just to see if it softens the plastic.I hate it when I go to the kitchen for food and all I find are ingredients!
MichaelCentral Connecticut -
You can try a bicycle shop for detergent based chain cleaners. If you want to buy on-line I would go to "Bike Nashbar" http://www.nashbar.com/bikes/TopCategory_10053_10052_200293_-1_200278_N
The Orange based ones have worked on my bicycle chain better then gasoline.
For plastic gears I would not use a grease that is not intended for plastic as many greases will damage the gears. Look for "anderol" or "plastislip".
TTFN WLL -
what do you guys think of acetone? It evaporates super quick and dissolves grease on contact .... worth a shot lol I hope my KA mixer last s longer than 6 yrs they aint cheap
-
We’re talking metal gears here right?
Cause plastic stuff can be made into “mush” with some solvents!! If they are plastic, use the Dawn and hot water !!
As for metal, and for whatever its worth, I’m in the gasoline camp...Somewhat.
BUT, use white gas. It has no additives, cleaners, nothing!
It will defiantly cut the grease...I use it on my XC skis to remove “kick wax” and that **** is really tough stuff.
How can a guy go wrong...Going with gas? -
You might try Simple Green. It's a pretty good degreaser. DH uses it to clean new tools (like his mini mill, new bits, etc., that are coated with oil and grease to prevent rusting) and it does an amazing job. The bottle says it's non-toxic.
To evaporate any water droplets after cleaning (before applying new grease), something like the cheap vodka is a good idea - we used really high proof ethanol in a thin films lab I worked in to getter all the water after wet cleaning.
-MEgging in Crossville, TN -
Terry - Wipe away any excess grease and clean the rest using mineral spirits (paint thinner) and then use a strong dish detergent.
-
thanks to all of you that have replied. i am sorry i did not reply to you individually. but i do thank you for your imput..
well i went to the auction this morning and did not check the forum. but i did stop by the resturant depot. i decided that would be the place to find something. well i did. i found professional strength easy off oven cleaner. it was the only thing that i found that i thought was good enough for my family. it also has the nsf symbol on it. there were only two things there with that!! i figured if it was good enough to clean the oven it was good enough to use in a gear housing.
once again thanks to all of you who respondedhappy eggin
TB
Anderson S.C.
"Life is too short to be diplomatic. A man's friends shouldn't mind what he does or says- and those who are not his friends, well, the hell with them. They don't count."
Tyrus Raymond Cobb
-
Bente, Can you post again, letting us know how it worked, after you try it?
As often as I read about folks fixing their K.A. lately, if your idea works well, it would be helpful info to have.
(I know gasoline MIXED with oven cleaner! ) -
I think you made the right choice.
Categories
- All Categories
- 182.8K EggHead Forum
- 15.7K Forum List
- 459 EGGtoberfest
- 1.9K Forum Feedback
- 10.3K Off Topic
- 2.2K EGG Table Forum
- 1 Rules & Disclaimer
- 9K Cookbook
- 12 Valentines Day
- 91 Holiday Recipes
- 223 Appetizers
- 516 Baking
- 2.4K Beef
- 88 Desserts
- 164 Lamb
- 2.4K Pork
- 1.5K Poultry
- 30 Salads and Dressings
- 320 Sauces, Rubs, Marinades
- 543 Seafood
- 175 Sides
- 121 Soups, Stews, Chilis
- 36 Vegetarian
- 100 Vegetables
- 313 Health
- 293 Weight Loss Forum