Big Green Egg - EGGhead Forum - The Ultimate Cooking Experience...
We’re feeling pretty super, how about you? The big game is fast approaching, and while we love football, we love an excuse to invite people over and cook even more! You too can cook like a champion with recipes from Dr. BBQ’s NFL Gameday Cookbook: Grilled Tuna Sandwiches from Seattle and Baked Brie from New England. Who’s going to win? You’ll have to cook both to find out.

The 17th Annual EGGtoberfest was amazing - here are the highlights Click Here

Plate setter broke - what are the options?

I was cooking our normal Sunday evening dinner (salmon) and my plate setter broke. I had it leaning on 2 'legs' and dog knocked it over. Feel onto the flat part and the other ' leg' broke off. Before I replace it with another plate setter, I wonder what other options are out there. I have read many posts about the AR and related attachments. I do own a pizza stone. I only used the plate setter for low mad slow cooks and the occasional pizza. Any advice for replacement options? Thanks
LBGE, Marietta, GA
·

Comments

  • GriffinGriffin Posts: 6,646
    Cheapest would be some JB Weld.

    Richardson, Texas

    Griffin's Grub or you can find me on Facebook

    The Supreme Potentate, Sovereign Commander and Sultan of Wings

     

    ·
  • JB weld and don't let the sous chef near it again......
    Delta B.C. - Vee-Gan: old Indian word for poor hunter. 
    ·
  • EagleIIIEagleIII Posts: 111
    Agreed...JB Weld is the way to go.  I broke off one of my PS legs when I tried to carry a hot PS too far from the egg and the heat went through my $10 Welding Gloves.  I had to put the PS down a little faster than it liked and one leg snapped off.  It has been JB welded back on for forever...
    ·
  • get in touch with you dealer take photos of broken plate setter and give the photo to the dealer and the dealer will send the photo to the mothership and they will replace your broken plate setter 
    2 Large Eggs and a Mini 2 Pit Bulls and a Pork shoulder or butt nearby and 100% SICILIAN
    Long Island N.Y.
    ·
  • calikingcaliking Posts: 6,133
    Cheaper options:
    1. JB weld
    2. Try to get a replacement from the dealer/mothership (don't know if it will be covered if it didn't break while cooking)
    3. Weber 18.5" replacement grid, 2 bricks, terracotta clay saucer - all usually available at HD/Lowes

    $$ options:
    1. Buy a new platesetter
    2. Adjustable Rig

    If you're going to spend some money, my vote is for the AR.


    #1 LBGE December 2012 • #2 SBGE February  2013 • #3 Mini May 2013
    A happy BGE family in Houston, TX.
    ·
  • mother ship don't need to know the details it broke while doing a clean burn end of story 
    2 Large Eggs and a Mini 2 Pit Bulls and a Pork shoulder or butt nearby and 100% SICILIAN
    Long Island N.Y.
    ·
  • JeremiahJeremiah Posts: 1,898
    I made my own. It's a $14 pizza stone, $8 stainless bolts/ washers and $9 weber grill. It works well as a raised grid too:)
    image.jpg
    1729 x 1345 - 651K
    Aiken, SC
    ·
  • Mattman3969Mattman3969 Posts: 3,769
    I would go for a PSwoo3 from CGS. You can still use your plate setter as is and have a raised direct option plus it is really nice for removing a hot PS. My woo lives in both the small and large

    -----------------------------------------


    Large BGE. Small BGE Henderson, Ky.
    ·
  • tulocaytulocay Posts: 1,688
    Thanks for all the comments. Very helpful.
    LBGE, Marietta, GA
    ·
  • captjocaptjo Posts: 58
    One additional option that no one seems to have mentioned...a cast iron platesetter made by Innovations by Chance

    Bristow, VA
    1 Lrg & 1 XL
    ·
  • stlcharcoalstlcharcoal Posts: 1,006

    I broke a leg off of mine, so I broke the other two off and made a pizza stone out of it.

    Then I bought the Kamado Joe deflector.......much better unit.

    Connect:  Website  -  Facebook  -  Twitter

    ·
  • IMHO lying to the mothership about how the ps broke negatively reflects on the community and makes it harder for us to file warranty claims in the long run. Not saying anyone WOULD lie, of course. But the bge warranty people have been so good, they may just replace the ps if you tell them it barely got knocked over and broke. They seem to be good people. Give them a chance.
    Large BGE -- Greensboro!


    ·
  • tarheelmatttarheelmatt Posts: 2,014
    I would not lie, personally.  Either fix it or replace it.  Karma is a beeatch.  
    Thanks,

    Matthew
    ---------------------------------------------------------------------

    Thomasville, NC - Large BGE (w/Nest) - Plate Setter - Maverick ET-733 - BBQ Guru Party-Q (new design ) Pizza Stone - BGE V-Rack - Weed Torch (to light egg)

    Facebook
    My Photography Site
    ·
  • Ugh!  I just had a similar thing happen..

    Didn't drop it or anything..opened up the grill after a relatively low degree cook (350 for chicken) and one of the legs cracked right off.  Barely touched it..for all I know, it was broken before I even picked it up out of the grill as the leg stayed in the grill when I pulled out the PS.

    I bought through an authorized dealer, so wondering if they will replace it outright and deal with BGE corp separately.

    If I did want to try to fix it, WHICH JB Weld do you use?  The only ones I can find appear to only be rated up to 500 degrees..

    Thx..
    Mini BGE, KJ Classic - Black, Cookshack SM025, Weber Gasser (mostly for Kamado storage!)
    ·
  • Nice rig Jeremiah
    ·
  • SmokyBear said:

    Ugh!  I just had a similar thing happen..

    Didn't drop it or anything..opened up the grill after a relatively low degree cook (350 for chicken) and one of the legs cracked right off.  Barely touched it..for all I know, it was broken before I even picked it up out of the grill as the leg stayed in the grill when I pulled out the PS.

    I bought through an authorized dealer, so wondering if they will replace it outright and deal with BGE corp separately.

    If I did want to try to fix it, WHICH JB Weld do you use?  The only ones I can find appear to only be rated up to 500 degrees..

    Thx..

    Plate setter and stones are covered for 3 years. If it broke while cooking and you are under the 3 year mark, they'll replace it with no problem.
    Mark Annville, PA
    ·
Sign In or Register to comment.