Share your photos by tagging us and using the hashtag #BigGreenEgg.
Want to see how the EGG is made? Click to Watch
High Que learning curve
Comments
-
Extra BBQ sauce? It might turn out better than you expect although I have never cooked a shoulder quite that high.Gerhard
-
Yeah never been in the turbo butt camp. I guess I am old school and like the low n slow. I usually check mine at 195IT and go from there. 212 was a shocker in 7 hours. Oh and confirmed IT with thermopen as well.Columbia, SC --- LBGE 2011 -- MINI BGE 2013
-
Chubbs you are only 2 hours away from Turbo Club Membership. Your application is being held after this cook. TURBO BUTTS · Hot'n fast, 350 for 3 hours to internal to around 160, then wrap in foil and 2 more hours to 195 and then let it rest for an hour or so wrapped in towels in a ice chest. Falls apart and oh so good! Have fun! · Be sure you only get a 7lb butt or so . Note: both times on the foil wrap is not required. Nor is the butt box.Salado TX & 30A FL: Egg Family: 3 Large and a very well used Mini, added a Mini Max when they came out (I'm good for now). Plus a couple Pit Boss Pellet Smokers.
-
Oh, about that learning curve. Guess it should be posted about low and slow being a little different. ]Salado TX & 30A FL: Egg Family: 3 Large and a very well used Mini, added a Mini Max when they came out (I'm good for now). Plus a couple Pit Boss Pellet Smokers.
-
You should be able to FTC til ready to pull and eat-I'm sure it will be fine. Just remember the downside to the turbo process is that you have less time in the BGE supervisory role (away from SWMBO) with the attendant supervisory beverages. FWIW-Louisville; Rolling smoke in the neighbourhood. # 38 for the win. Life is too short for light/lite beer! Seems I'm livin in a transitional period.
-
I have a HighQ grate, and have stopped using it for it's designed use. I found I was burning through much more charcoal than I wanted to. I would still not want to be without it, as I use it each time I cook steaks. I place it on the coals so I can do a quick sear TREX style. Works great for that purpose.
-
The High-Que, IMHO, requires us to set vents differently to obtain a stable temp, much like we cook to temp - not time.The HQ does not use more lump than a OEM grate at a specific stable temp. It does require less air to maintain the same stable temp as an OEM grate. If you leave the petals fully opened and the bottom vent at 1" the OEM grate may maintain a temp of 350, the HQ will maintain a temp something much higher, maybe 400-450.To obtain the same stable dome temp as an OEM, the HQ will require you to choke it down a bit.And I find just the opposite to @NewEnglandEgger. For low and slows, the OEM grate in my MBGE would plug, the HQ, never, no wiggle rod required.Delta B.C. - Whiskey and steak, because no good story ever started with someone having a salad!
-
I've plugged the OEM on low & slows requiring a wiggle rod to keep cooking. No wiggle rod needed with a High Que grate. @Skiddymarker is correct. To obtain a specific temp using the High Que grate, you must choke your vents down a bit more than you would using the OEM grate.Flint, Michigan
-
Yeah, this was an accidental turbo butt. Verdict is in, definitely my worst butt ever made. Overcooked and the bark is literally bark. As in tree bark. Was planning to eat at 2pm. Crazy thing is I replaced my gasket and dome is a little offline. I figured if anything I would wake up and see I lost some temp. Was planning for a full day of monitoring the egg with my beer fridge. Was kind of looking forward to the dreaded plateau. Plans changed when it was not only done at 7am, but overdone. Foiled for a few hours, went back to sleep until guests woke up. Shared the bad news. Guests were raving at how good it was. With my tail between my legs I just thought to myself they would have passed out if they had the normal results.Columbia, SC --- LBGE 2011 -- MINI BGE 2013
-
I too haven't had any issues with low and slow. I do use only two firestarters when I'm shooting for 225 indirect, but I did that on the other grate as well. To do 225 I let the temps get within about 50° and then I start closing things down fast. Although I haven't done it yet, I wouldn't want to overshoot 225 because my grates are barely open to reach that temp. When I am cooking that low I usually keep an eye on things a little longer than usual to make sure I am really stabilized at 225 instead of just passing by 225 when I happened to look at the thermometer. The longest cook I have done so far with 225° temperatures was a 10 hour small brisket cook. When I stabilized at 225, I went 10 hours and I only had to make one adjustment at the nine hour mark when I mopped and the temperatures didn't quite recover. I use WGWW and I find it's great for everything, but I particularly like it for low and slow.
-
Pull it, toss in a crock pot, add apple juice to put moisture back into it, and let it sit on low until ready to eat. It will be fine.
-
jfm0830 said:I too haven't had any issues with low and slow. I do use only two firestarters when I'm shooting for 225 indirect, but I did that on the other grate as well. To do 225 I let the temps get within about 50° and then I start closing things down fast. Although I haven't done it yet, I wouldn't want to overshoot 225 because my grates are barely open to reach that temp. When I am cooking that low I usually keep an eye on things a little longer than usual to make sure I am really stabilized at 225 instead of just passing by 225 when I happened to look at the thermometer. The longest cook I have done so far with 225° temperatures was a 10 hour small brisket cook. When I stabilized at 225, I went 10 hours and I only had to make one adjustment at the nine hour mark when I mopped and the temperatures didn't quite recover. I use WGWW and I find it's great for everything, but I particularly like it for low and slow.Columbia, SC --- LBGE 2011 -- MINI BGE 2013
-
Just curious, but do you think with your dome not aligned, maybe that let in more air and caused the temp to climb? I have not had any problems like you describe with my high que on the low and slows I did before I got my DigiQ. While the vent settings are a little tighter, once I got them set, they would hold pretty well.Clarendon Hills, IL
-
Not off much and dollar bill test still has drag all the way around. But maybe.BuckeyeBob said:Just curious, but do you think with your dome not aligned, maybe that let in more air and caused the temp to climb? I have not had any problems like you describe with my high que on the low and slows I did before I got my DigiQ. While the vent settings are a little tighter, once I got them set, they would hold pretty well.
Columbia, SC --- LBGE 2011 -- MINI BGE 2013 -
I have a Maverick thermometer to remotely monitor the temperature, the range is good, the batteries last a long time and you can set alarms that wake you if the temperature go outside the parameters you set. It monitors the temperature of both the grill and the meat. I go to bed not worrying what is going on with the egg.Gerhard
-
Yeah gave my wife a hard time. She bought me one but won't give it to me until my birthday in February. Told her it would have been a non issue with it.gerhardk said:I have a Maverick thermometer to remotely monitor the temperature, the range is good, the batteries last a long time and you can set alarms that wake you if the temperature go outside the parameters you set. It monitors the temperature of both the grill and the meat. I go to bed not worrying what is going on with the egg.
Gerhard
Columbia, SC --- LBGE 2011 -- MINI BGE 2013 -
Could the wind have changed during the night , after it was stable ? I have noticed that can have a dramatic effect on the temp . That is what I would figure happened , I doubt the grate had anything to do with it alone.
Ova B.
Fulton MO -
If so, it would have been the first time it was effected that much. There are definitely differences with the grate. Cooked several things after the butt this weekend and vent settings are noticeably different. Getting used to it though.calracefan said:Could the wind have changed during the night , after it was stable ? I have noticed that can have a dramatic effect on the temp . That is what I would figure happened , I doubt the grate had anything to do with it alone.
Columbia, SC --- LBGE 2011 -- MINI BGE 2013 -
Forgot to mention, during a cook this weekend I also noticed a clear substance over the metal bottom vent. Looking at it, it looked like a type of glue, but when I touched it with a toothpick (egg was hot) it was hard. With the high que grate there was a ton of hot embers in the bottom of egg. Has anyone seen this. Not a good egg weekend for me LOL!!Columbia, SC --- LBGE 2011 -- MINI BGE 2013
-
Chubbs I have noticed when Mangrates are materializing from one form to another a clear substance will appear. Who are we to question.Salado TX & 30A FL: Egg Family: 3 Large and a very well used Mini, added a Mini Max when they came out (I'm good for now). Plus a couple Pit Boss Pellet Smokers.
-
@Mickey, seriously have you ever noticed the clear gluelike film over the bottom vent when high heat cooking and have a ton of hot coal fall through the high que? By over I mean if you are looking at the vent, it is above it. Almost like it is glued to the ceramic.Columbia, SC --- LBGE 2011 -- MINI BGE 2013
Categories
- All Categories
- 182.8K EggHead Forum
- 15.7K Forum List
- 459 EGGtoberfest
- 1.9K Forum Feedback
- 10.3K Off Topic
- 2.2K EGG Table Forum
- 1 Rules & Disclaimer
- 9K Cookbook
- 12 Valentines Day
- 91 Holiday Recipes
- 223 Appetizers
- 516 Baking
- 2.4K Beef
- 88 Desserts
- 165 Lamb
- 2.4K Pork
- 1.5K Poultry
- 30 Salads and Dressings
- 320 Sauces, Rubs, Marinades
- 543 Seafood
- 175 Sides
- 121 Soups, Stews, Chilis
- 36 Vegetarian
- 100 Vegetables
- 313 Health
- 293 Weight Loss Forum