Welcome to the EGGhead Forum - a great place to visit and packed with tips and EGGspert advice! You can also join the conversation and get more information and amazing kamado recipes by following Big Green Egg to Experience our World of Flavor™ at:
Facebook  |  Twitter  |  Instagram  |  Pinterest  |  Youtube  |  Vimeo
Share your photos by tagging us and using the hashtag #BigGreenEgg.

Want to see how the EGG is made? Click to Watch

Minimax used versus new

 I’ve been on the market for a minimax to add beside my XL for quite some time.  I found one locally that has only been used a couple of times in great condition for $325. (No cracks, carrier grates ash tools etc included) At that price should I still consider a new unit from dealer or is this deal to good to pass up? 

Thanks,
Alex

Welcome!

It looks like you're new here. Sign in or register to get started.

Comments

  • Posts: 541
    No warranty brah!
  •  I guess the better question is… Is that warranty worth $300? 
  • Posts: 3,865
    Rule of thumb around here is 50% of retail cost is the acceptable rate, with accessories thrown in as lagniappe.  Since you already have an XL, you are aware of the potential for breaks, cracks, etc.  I think the smaller eggs tend to have less issues, but that's just anecdotal from reading stuff on here.  If you want a minimax, I'd offer $300 and get it.
    NOLA
  • Posts: 6,647
    edited July 2019
    Add 75 bucks to that and go to Costco and grab a KJ Jr during the roadshow. I want the warranty 

    Oh no, I think I just started another war 😎
    ~ John - Formerly known as ColtsFan  - https://www.instagram.com/hoosier_egger
    XL BGE, LG BGE, Med BGE, BGE Chiminea, KJ Jr, PK Original, Ardore Pizza Oven
    Bloomington, IN - Hoo Hoo Hoo Hoosiers!

  • Posts: 4,121
    ColtsFan said:

    Oh no, I think I just started another war 😎
    Way to go man...  way to go. 
    --------------------------------------------------
    Burning lump in Downingtown, PA or diesel in Cape May, NJ.
    ....just look for the smoke!
    Large and MiniMax
    --------------------------------------------------

    Caliking said:   Meat in bung is my favorite. 
  • Posts: 3,196
    I’d buy it. Chances are that the bottom 3 pieces of the egg won’t all be compromised. One or two might. You get lifetime warranty on replacement ceramics. If you are unlucky in needing the ring, base, and firebox, I think their price could be very close to $300. 
  • Posts: 4,121
    I was thinking to myself about 3-4 months ago about no one reporting cracks with the MM on here that I can remember.  
    I went to do a thorough clean out last week, and found the firebox is cracked all the way down about 1/3 the way around from the factory split. No idea what the cost is, but figure I should get the replacement sooner rather than later.  Wonder what that cost would be out of curiosity.

    $325 is not a bad price, but coltsfan has a valid point. 
    --------------------------------------------------
    Burning lump in Downingtown, PA or diesel in Cape May, NJ.
    ....just look for the smoke!
    Large and MiniMax
    --------------------------------------------------

    Caliking said:   Meat in bung is my favorite. 
  • Posts: 30
    Sea2Ski said:
    Vow to only burn Cowboy Lump in it and really get things rolling while you're at it.   =)
  • Posts: 181
    I'd buy it and wouldn't hesitate for a minute. I've never used the warranty and I've had a large for many many years. But my mini max used for 300 bucks. Some of the best $300 I ever spent
  • Thanks- I’m going for it. Im sure I will love the MM 
  • Thanks- I’m going for it. Im sure I will love the MM 
    I love mine. I’d probably get a small or a KJ jr for the extra clearance if I did it again. 

    Eventually I replaced the fire ring with the newer shorter ring which drops the grate even closer to the coals. 

    With a KAB and a PS woo it’s become very, very handy and I like it. Just count on that in your budget 
  • Posts: 18,496
    The smaller eggs seem to hold up better as far as cracking is concerned. Just a function of the amount of thermal mass and the propensity of having a a void in the ceramic
    that ultimately causes a crack. 
  • The smaller eggs seem to hold up better as far as cracking is concerned. Just a function of the amount of thermal mass and the propensity of having a a void in the ceramic
    that ultimately causes a crack. 
    True but the MM nest doesn’t have enough clearance to do searing temps on a wood table without protection. I have shattered a tile underneath it, not as much air gap as the large nest 
  • Posts: 18,496
    True but the MM nest doesn’t have enough clearance to do searing temps on a wood table without protection. I have shattered a tile underneath it, not as much air gap as the large nest 
    Add some bolt on isolation pads to the feet to raise it 
  • Posts: 19,636
    True but the MM nest doesn’t have enough clearance to do searing temps on a wood table without protection. I have shattered a tile underneath it, not as much air gap as the large nest 
    I use my MM mostly for searing.  A standard tile under its feet for a couple of years and no problem.  But I believe you.
    Sandy Springs & Dawsonville Ga
  • Posts: 471
    I have an XL too and have been looking for a MM to pop up. At $325 I'd buy it. They don't come used often.
    XL aka Senior, Mini Max aka Junior, Weber Q's, Blackstone 22, Lion built in, RecTec Mini 300, Lodge Hibachi, Uuni, wife says I have too many grills,,,,how many shoes do you have?
     
    IG -->  matt_86m
  • Picked up the MM today and love it. It’s in great shape, very lightly used...
  • Posts: 12,136
    edited July 2019
    Picked up the MM today and love it. It’s in great shape, very lightly used...
    Excellent, someone more familiar can help with this...Old handle or new handle on this one? There were issues with the old handles failing by bolt pulling out.
    Thank you,
    Darian

    Galveston Texas
  • Posts: 3,196
    edited July 2019
    Photo Egg said:
    Excellent, someone more familiar can help with this...Old handle or new handle on this one? There were issues with the old handles failing by bolt pulling out.
    I think mines the newer style. It’s a hex head bolt on both sides. 


    Congrats @AlexCapote, thats a nice score.
  • Picked up the MM today and love it. It’s in great shape, very lightly used...
    Picked up the MM today and love it. It’s in great shape, very lightly used...
    Amazing. Congratulations 

Welcome!

It looks like you're new here. Sign in or register to get started.