Welcome to the EGGhead Forum - a great place to visit and packed with tips and EGGspert advice! You can also join the conversation and get more information and amazing kamado recipes by following Big Green Egg to Experience our World of Flavor™ at:
Facebook  |  Twitter  |  Instagram  |  Pinterest  |  Youtube  |  Vimeo
Share your photos by tagging us and using the hashtag #BigGreenEgg.

Want to see how the EGG is made? Click to Watch

My new MiniMax is outdated - seeking advise

Eggin_in_PA
Eggin_in_PA Posts: 91
in EggHead Forum
Hello forum, it appears my MiniMax that my wife got me for Xmas has been on the shelf a couple years. It has the old carrier handles that I read mothership will send updated ones.  My issue is that it has the small egg fire ring as it's .75" from the top of the base.  I was looking foward to getting the woo ring but CGS no longer supports this version.  Should I just sear away till it cracks?  Is there any benefit to having the lower fire ring?  Also is the grid supposed to float on top of the fire ring?  
York County, PA
Large BGE 2014 - CGS adj rig, spider, and stones..
Mini Max 2018
· Share on FacebookShare on Twitter
«1

Comments

  • bubbajack
    bubbajack Posts: 1,174
    That really sux! I would take it back!
    I drink cheap beer so I can afford good bourbon.

    Salisbury, NC...... XL,Lx3,Mx2,S, MM, Mini BGE, FireDisc x2. Blackstone 22", Offset smoker, weber kettle 22"


    · Share on FacebookShare on Twitter
  • cookingdude555
    cookingdude555 Posts: 3,196
    What’s the difference on the internals?
    · Share on FacebookShare on Twitter
  • Jstroke
    Jstroke Posts: 2,605
    If they are a good dealer, they will make the switch. If they don’t I would reach out to the mothership. Bruce might be able to help give it a push. 
    Columbus, Ohio--A Gasser filled with Matchlight and an Ugly Drum.
    · Share on FacebookShare on Twitter
  • pgprescott
    pgprescott Posts: 14,544
    It’s possible I have an old style woo sitting around our shop. I’m in Florida now but am flying back tomorrow. If you want, PM me and I’ll look. 
    · Share on FacebookShare on Twitter
  • northGAcock
    northGAcock Posts: 15,173
    The Cen-Tex Smoker said:
    lousubcap said:
    Take it back and demand a current model, especially if they got current model pricing and no disclaimer.    If the dealer won't move then contact BGE HQ and explain the situation.  Worst place you will end up is where you are.  FWIW-
    very much agree with the Good Captain here. If you paid full pop, you should get the new model. I'm pretty sure It's been out 2+ years now.
    You are correct....got one of the first (new) in December of 16.
    Ellijay GA with a Medium & MiniMax

    Well, I married me a wife, she's been trouble all my life,
    Run me out in the cold rain and snow
    · Share on FacebookShare on Twitter
  • Eggin_in_PA
    Eggin_in_PA Posts: 91
    Did these retail for $649.00 before? I skillfully removed the 599.00 sticker to reveal the original one...  Gonna call them in the AM to see what they have to say.  I have a feeling the display one was the old style as well. Pretty sure the large eggs still had the daisy wheels. Other than eggfests, I don't think they sell many eggs.

    Bummer, I was looking forward to searing up steaks..

    cookingdude555 said:
    What’s the difference on the internals?
    The new fire ring goes down in the base 1.5" instead of .75". I also think it has a little more of a diameter to it.  The new placesetter has longer legs as well.  I'm thinking they did this to create more air gap for bringing the temp up quicker.  
    York County, PA
    Large BGE 2014 - CGS adj rig, spider, and stones..
    Mini Max 2018
    · Share on FacebookShare on Twitter
  • danguba78
    danguba78 Posts: 92
    Same thing happens to me last Christmas. I contacted HQ and got the redesigned parts. 

    https://eggheadforum.com/discussion/1210838/1st-gen-v-2d-gen-minimax-what-s-the-difference
    Bridgeport, Chicago, IL
    XLBGE, MiniMax BGE
    · Share on FacebookShare on Twitter
  • KennyCJR
    KennyCJR Posts: 262
    lousubcap said:
    Take it back and demand a current model, especially if they got current model pricing and no disclaimer.    If the dealer won't move then contact BGE HQ and explain the situation.  Worst place you will end up is where you are.  FWIW-
    This
    Llano, TX   -  Med and XL BGE’s
    · Share on FacebookShare on Twitter
  • Eggin_in_PA
    Eggin_in_PA Posts: 91
    danguba78 said:
    Same thing happens to me last Christmas. I contacted HQ and got the redesigned parts. 

    https://eggheadforum.com/discussion/1210838/1st-gen-v-2d-gen-minimax-what-s-the-difference

    Your response is greatly appreciated.  I really do not want to exchange even if they would have a new one.. Mine was the last one in a box. My large was a demo egg and I had several things to address when I got it home..

    BTW, Did your dealer help you out concerning what you paid for it?  I'm afraid they might try to charge me the $649.00 from the other sticker LOL... It's disconcerting that they just put a new sticker over the old one...
    York County, PA
    Large BGE 2014 - CGS adj rig, spider, and stones..
    Mini Max 2018
    · Share on FacebookShare on Twitter
  • danguba78
    danguba78 Posts: 92
    I didn’t deal with the dealer at all on the issue. It was a gift, so I didn’t have any sway on a price adjustment (or even know if my wife got a deal). I just got directly in touch with Bruce from BGE HQ, and he sent the new ring. 
    Bridgeport, Chicago, IL
    XLBGE, MiniMax BGE
    · Share on FacebookShare on Twitter
  • KennyCJR
    KennyCJR Posts: 262
    Eggin_in_PA said:
    danguba78 said:
    Same thing happens to me last Christmas. I contacted HQ and got the redesigned parts. 

    https://eggheadforum.com/discussion/1210838/1st-gen-v-2d-gen-minimax-what-s-the-difference

    Your response is greatly appreciated.  I really do not want to exchange even if they would have a new one.. Mine was the last one in a box. My large was a demo egg and I had several things to address when I got it home..

    BTW, Did your dealer help you out concerning what you paid for it?  I'm afraid they might try to charge me the $649.00 from the other sticker LOL... It's disconcerting that they just put a new sticker over the old one...
    Seriously, you need to exchange for the new model, that has all of the new style parts. Bands, rEGGulator cap, etc.  You will have this thing for years.  Do yourself a favor and get what you paid for.  

    I’m holding my dealer to provIde the Acacia Eggmates I ordered, vs the composite ones they brought me. 

    You shouldn’t have buyers remorse because your dealer tried to move old product from his warehouse. 
    Llano, TX   -  Med and XL BGE’s
    · Share on FacebookShare on Twitter
  • Eggin_in_PA
    Eggin_in_PA Posts: 91
    KennyCJR said:
    Eggin_in_PA said:
    danguba78 said:
    Same thing happens to me last Christmas. I contacted HQ and got the redesigned parts. 

    https://eggheadforum.com/discussion/1210838/1st-gen-v-2d-gen-minimax-what-s-the-difference

    Your response is greatly appreciated.  I really do not want to exchange even if they would have a new one.. Mine was the last one in a box. My large was a demo egg and I had several things to address when I got it home..

    BTW, Did your dealer help you out concerning what you paid for it?  I'm afraid they might try to charge me the $649.00 from the other sticker LOL... It's disconcerting that they just put a new sticker over the old one...
    Seriously, you need to exchange for the new model, that has all of the new style parts. Bands, rEGGulator cap, etc.  You will have this thing for years.  Do yourself a favor and get what you paid for.  

    I’m holding my dealer to provIde the Acacia Eggmates I ordered, vs the composite ones they brought me. 

    You shouldn’t have buyers remorse because your dealer tried to move old product from his warehouse. 
    Kenny,

    Yeah, I just looked at the pic of the current model.  Bands and cap changed too. Will be in touch with the dealer in the morning.. Appreciate the feedback, thanks..
    York County, PA
    Large BGE 2014 - CGS adj rig, spider, and stones..
    Mini Max 2018
    · Share on FacebookShare on Twitter
  • alaskanassasin
    alaskanassasin Posts: 8,967
    As others have mentioned you’re better off to call Bruce.
    South of Columbus, Ohio.


    · Share on FacebookShare on Twitter
  • Eggin_in_PA
    Eggin_in_PA Posts: 91
    alaskanassasin said:
    As others have mentioned you’re better off to call Bruce.
    I'm going to see what the dealer has to say, but I have a feeling Bruce will be getting a call. 
    York County, PA
    Large BGE 2014 - CGS adj rig, spider, and stones..
    Mini Max 2018
    · Share on FacebookShare on Twitter
  • WeberWho
    WeberWho Posts: 11,540
    Maybe @DMW could give you some direction with a dealer in the area. I'd assume your location has something to do with your forum name. It might be worth looking into other dealers for more current inventory. 
    "The pig is an amazing animal. You feed a pig an apple and it makes bacon. Let's see Michael Phelps do that" - Jim Gaffigan

    Minnesota
    · Share on FacebookShare on Twitter
  • DMW
    DMW Posts: 13,836
    Where in PA are you located?
    They/Them
    Morgantown, PA

    XL BGE - S BGE - KJ Jr - HB Legacy - BS Pizza Oven - 30" Firepit - King Kooker Fryer -  PR72T - WSJ - BS 17" Griddle - XXL BGE  - BS SS36" Griddle - 2 Burner Gasser - Pellet Smoker
    · Share on FacebookShare on Twitter
  • Eggin_in_PA
    Eggin_in_PA Posts: 91
    York
    York County, PA
    Large BGE 2014 - CGS adj rig, spider, and stones..
    Mini Max 2018
    · Share on FacebookShare on Twitter
  • DMW
    DMW Posts: 13,836
    Eggin_in_PA said:
    York
    A bit of a drive, but Meadow Creek BBQ Supply has been my go to dealer. They are in New Holland.
    https://www.meadowcreekbbqsupply.com/

    They/Them
    Morgantown, PA

    XL BGE - S BGE - KJ Jr - HB Legacy - BS Pizza Oven - 30" Firepit - King Kooker Fryer -  PR72T - WSJ - BS 17" Griddle - XXL BGE  - BS SS36" Griddle - 2 Burner Gasser - Pellet Smoker
    · Share on FacebookShare on Twitter
  • Eggin_in_PA
    Eggin_in_PA Posts: 91
    DMW said:
    Eggin_in_PA said:
    York
    A bit of a drive, but Meadow Creek BBQ Supply has been my go to dealer. They are in New Holland.
    https://www.meadowcreekbbqsupply.com/


    Appears I should have broadened my search further, top tier there.. Lancaster BBQ Supply had come up, but was not on BGE's dealer map. Dealer I purchased from was gold status, but I am thinking this just has to do with how big of a display they have to maintain.. I'll find out tomorrow. 
    York County, PA
    Large BGE 2014 - CGS adj rig, spider, and stones..
    Mini Max 2018
    · Share on FacebookShare on Twitter
  • Eggin_in_PA
    Eggin_in_PA Posts: 91
    Would another dealer assist if they did not make the sale?  I have been rather fortunate my large has not had any issues..
    York County, PA
    Large BGE 2014 - CGS adj rig, spider, and stones..
    Mini Max 2018
    · Share on FacebookShare on Twitter
  • DMW
    DMW Posts: 13,836
    Eggin_in_PA said:
    Would another dealer assist if they did not make the sale?  I have been rather fortunate my large has not had any issues..
    They would help with a warranty claim if you have original receipt. Not sure they could process a swap, but worth asking.
    They/Them
    Morgantown, PA

    XL BGE - S BGE - KJ Jr - HB Legacy - BS Pizza Oven - 30" Firepit - King Kooker Fryer -  PR72T - WSJ - BS 17" Griddle - XXL BGE  - BS SS36" Griddle - 2 Burner Gasser - Pellet Smoker
    · Share on FacebookShare on Twitter
  • stlcharcoal
    stlcharcoal Posts: 4,762
    DMW said:
    Eggin_in_PA said:
    York
    A bit of a drive, but Meadow Creek BBQ Supply has been my go to dealer. They are in New Holland.
    https://www.meadowcreekbbqsupply.com/

    I sent them 8 pallets about two weeks ago......been trying to get in there for years!
    · Share on FacebookShare on Twitter
  • Eggin_in_PA
    Eggin_in_PA Posts: 91
    DMW said:
    Eggin_in_PA said:
    Would another dealer assist if they did not make the sale?  I have been rather fortunate my large has not had any issues..
    They would help with a warranty claim if you have original receipt. Not sure they could process a swap, but worth asking.
    For sure, I will have to touch base with them if all else fails..  Thanks for the advise..

    stlcharcoal said:
    DMW said:
    Eggin_in_PA said:
    York
    A bit of a drive, but Meadow Creek BBQ Supply has been my go to dealer. They are in New Holland.
    https://www.meadowcreekbbqsupply.com/

    I sent them 8 pallets about two weeks ago......been trying to get in there for years!

    I now have another reason to go there.. 👍
    York County, PA
    Large BGE 2014 - CGS adj rig, spider, and stones..
    Mini Max 2018
    · Share on FacebookShare on Twitter
  • SamIAm2
    SamIAm2 Posts: 2,007
    My old MiniMax is still outdated. It has the short fire ring, platesetter, and the older carrier. Doesn't bother me since I also have a Large. Bought it at an eggfest the year after they were announced. The dealer who held the fest said I could bring the 'cracked ceramics' back for replacement when I noticed the differences at his store.  Since they aren't cracked, have not made the claim - yet. Even with all the old accessories, the Minimax is still a fun cooker.  Was up your way on vacation a long time ago visiting family way east of you in Nazareth and Easton. Might want to add your city to your signature so that question doesn't get asked again. 
    Ubi panis, ibi patria.
    Large - Roswell rig, MiniMax-PS Woo; Cocoa, Fl.
    · Share on FacebookShare on Twitter
  • Eggin_in_PA
    Eggin_in_PA Posts: 91
    Just got off the phone with the dealer, they are going to make it right.. 

    I had called Meadowcreek prior.  Matt is willing to help me if need be. 

    SamIAm2 said:
    My old MiniMax is still outdated. It has the short fire ring, platesetter, and the older carrier. Doesn't bother me since I also have a Large. Bought it at an eggfest the year after they were announced. The dealer who held the fest said I could bring the 'cracked ceramics' back for replacement when I noticed the differences at his store.  Since they aren't cracked, have not made the claim - yet. Even with all the old accessories, the Minimax is still a fun cooker.  Was up your way on vacation a long time ago visiting family way east of you in Nazareth and Easton. Might want to add your city to your signature so that question doesn't get asked again. 


    Updated for location.. I will see what Frankenegg may come out of this.. 
    York County, PA
    Large BGE 2014 - CGS adj rig, spider, and stones..
    Mini Max 2018
    · Share on FacebookShare on Twitter
  • SamIAm2
    SamIAm2 Posts: 2,007

    Funny you mention Frankenegg, that's what I call my large.
    Ubi panis, ibi patria.
    Large - Roswell rig, MiniMax-PS Woo; Cocoa, Fl.
    · Share on FacebookShare on Twitter
  • bigguy136
    bigguy136 Posts: 1,362
    I bought one of the original MM. I finally got around to updating. My dealer charged me $40 for the new style fire ring. I also warrantied the handles and they gave me the entire frame. Now I need to get over to CGS for some internals....

    Big Lake, Minnesota

    2X Large BGE, 1 Mini Max, Stokers, Adjustable Rig

    · Share on FacebookShare on Twitter
  • bubbajack
    bubbajack Posts: 1,174
    CGS Woo and Stone have made my Mini Max a cooking machine, not that it was not before, but just better.
    I drink cheap beer so I can afford good bourbon.

    Salisbury, NC...... XL,Lx3,Mx2,S, MM, Mini BGE, FireDisc x2. Blackstone 22", Offset smoker, weber kettle 22"


    · Share on FacebookShare on Twitter

Categories