Pictures of your table!!

artie325 · July 2016

cryland12 said:

Built this one this spring and loving the new egg. The table has a pressure treated frame with Tigerwood exterior and Granite top. Design was shamelessly taken from a table that @EggheadDad built, including the LED lights.

Your table came out great! I like the tigerwood. I almost chose tiger wood but went with Cumaru instead.

NoJokeSmoke · July 2016

This is what ours, me and @EggObsessed's, looked like until we had a little fire that has caused a little rebuild.

Image: https://us.v-cdn.net/5017260/uploads/editor/s2/jhi3micgesf1.jpg

Also, our most recent update:

northGAcock · July 2016

RockyTopDW said:

I had to wait a few years but I finally got my dream setup

That is a very nice set up. Love it.

Vegas Eggus · July 2016

Went for a low maintenance option on mine. Wood frame covered by Trex deck material and a couple of Quartz insets. Works really well. Hit it with the pressure washer when it gets dirty. Zero issues with the Trex melting or anything of the sort. Left about an inch gap to be safe and never even notice it.

Jai-Bo · July 2016

This was my 1st table,
http://eggheadforum.com/discussion/910180/from-tree-to-table#latest

and this is my next venture....http://eggheadforum.com/discussion/1193358/deer-fish-bge-table#latest

boonville-john · July 2016

Here is my table, but after looking at all the others, I want to build another.

Image: https://us.v-cdn.net/5017260/uploads/editor/vp/gkmubunn0u1a.jpg

Master_of_meat · July 2016

Mine is a little more basic compaired to most of these guys. I will be staining it in a couple weeks, the yellow wood is still drying

a

kidcowboy · September 2016

Here's mine.

_Moose_ · September 2016

@kidcowboy that is pretty awesome! Well done

NPHuskerFL · September 2016

My table has been pictured almost as much as Kim Kardashian's a$$ but, here ya go

Tspud1 · September 2016

_Moose_ said:

leemschu said:

@_Moose_ mine is a large I do wish my main table was a little wider. I personally wouldn't want the leaves wider.

Main table frame 25"Lx25"Wx30"H
center hole is around 21.5" across
Fold down wings are 25"Lx15"W
shelf the egg sits on is 15" from very top to top of second shelf.
Picked up the heaviest casters lowes had for it. Here's an additional picture.

@leemschu Awesome; thanks for the measurements and additional pic. After seeing yours setup and in use, I think I may make the main table a little wider myelf. Maybe 3 inches or so on each side

What kid of hige or support do you use on the drop down wings?

bigalsworth · September 2016

kidcowboy said:

Here's mine.

Wow that looks great, I might do something similar with a roof next summer when I do mine.

Rocket15 · September 2016

Image: https://us.v-cdn.net/5017260/uploads/editor/ai/578gpx7vbgeu.jpg

PSC · September 2016

Hi guys, here's a nite pic of my newly built outdoor kitchen. Hope you like it.

no forks and the bottle opener at the left of the mini fridge...

Image: https://us.v-cdn.net/5017260/uploads/editor/vz/rsdhkgfcd1cj.jpg

soicwby · September 2016

My cedar XL table finished, with custom covers

Image: https://us.v-cdn.net/5017260/uploads/editor/qr/pibzvbf14o3t.jpg

Image: https://us.v-cdn.net/5017260/uploads/editor/xa/vcdl624gl1ns.jpg

Image: https://us.v-cdn.net/5017260/uploads/editor/3l/ofyhx3mi0w19.jpg

BilZol · September 2016

PSC said:

Hi guys, here's a nite pic of my newly built outdoor kitchen. Hope you like it.

no forks and the bottle opener at the left of the mini fridge...

Nice. What are you using for the lighting? I need to add this to mine.

nolaegghead · September 2016

@BilZol LED lighting strips are now ubiquitous in this application. You can control everything (color, intensity, etc), and they are relatively inexpensive.

DuckDogDr · September 2016

@PSC I really like the table and light set up

PSC · September 2016

@BilZol I installed these

https://amzn.com/B01DBINHWA

BilZol · September 2016

Thx @nolaegghead and @PSC, I appreciate it.

RajunCajun · October 2016

Pictures of your table!!

Comments

Categories