Pictures of your table!!

Jcnewegg

Please take a minute to post a picture of your egg table here on my post please!! I am building mine and want some ideas. I have looked at a lot on here and other sites as well. But If you fine folks don't mind tell me what material you used, what stain if any, and the top coat if any how many coats and brand as well!! If you have drawers, show them and cabinets also (opened and closed). I would greatly appreciate it!! I love this site and can't wait to get to cooking. Oh and an approximate time it took as well as cost of materials if you don't mind!!

blasting

Welcome to the forum.  Good luck with your table.  Besides using the search box, there's another site,  I think it was the naked whiz that has a huge table section.  Google search will also bring up a ton of tables when you hit images.  

chrisc133

leemschu

blasting

@Jcnewegg   Here is that table link.  Tons of ideas.

http://www.nakedwhiz.com/TableGallery/tables.htm

tarheelmatt

So, you want folks to "take a minute" to re-post their tables that was probably already posted in this section already?  

Personally, I'd take a minute to search this section first and the Internets, then post.  

Pretty sure there's a thread to show your tables off.  

Pintrest has a lot of help too.   

Jcnewegg

I have literally been looking at every table on the Internet for a couple of months. But I would like to know details of some of them. Yes nakedwhiz and Pinterest has a ton of ideas and pictures. I am trying to waterproof mine as well as trying to decide on a finish. If folks don't have the time to post their info or pics I do understand that. I just wanted a one stop shop for me to keep track. 

chadpsualum

Mine is a pretty simple setup but it serves my needs.

Toxarch

Here it is after I set it up on the back porch

Toxarch

Other angle.

littlerascal56

I am with @tarheelmatt on this one. We have a forum dedicated to "tables" that probably has every table ever built by members.  Not a shortage of info for tables for sure.  We are all proud of our projects, and have already posted pictures and details.  If you are interested in ones personal design (or cost), just post in his/her discussion and I am sure that person will reply with more detail!!!

Thecoiman

A bit messy you get the idea

Thecoiman

Other side. Sorry on phone

johnkitchens

NPHuskerFL

This shot is from a few months  back. 

slovelad

@NPHuskerFL who built your table? I live near tampa FL, would love to have stable like that

swordsmn

leemschu said:

I just LOVE what you did here!   Kudos again!

A31unit

NPHuskerFL said:

This shot is from a few months  back. 

Where did you get that minimax roll around metal table cart. Looks perfect for the minimax I am gonna buy soon!!

Lowflyer

SaltySam

Mine is being built as I type this. Cedar table in the back, pre stain.  Concrete top is still curing in the mold in the foreground.  I still plan to stain and seal the table with spar urethane.  I'm debating on whether or not to acid stain the concrete top.  

This is project is about a week old, but about two years in the making.  I've debated over and over about exactly what I want.  I finally decided on a 5' long table with the Egg centered, so I could have two separate workspaces on either side.  One for food prep, and the other was a place for the AR to go when I need to access the coals.  I went with concrete, because I wanted something durable, stain resistant, and able to withstand heat.  I crack open the mold tomorrow. I'll flip it over to see how it took to the melamine.  I'm excited, but nervous.  Hopefully I'll have my own brag post in a week or so when it's finished!

Jcnewegg

Thecoiman said:

Other side. Sorry on phone

Wow I never thought of using the nest like that!! You have a lot of accessories!! Nice!! What wood is that?

Jcnewegg

SaltySam said:

Mine is being built as I type this. Cedar table in the back, pre stain.  Concrete top is still curing in the mold in the foreground.  I still plan to stain and seal the table with spar urethane.  I'm debating on whether or not to acid stain the concrete top.  

This is project is about a week old, but about two years in the making.  I've debated over and over about exactly what I want.  I finally decided on a 5' long table with the Egg centered, so I could have two separate workspaces on either side.  One for food prep, and the other was a place for the AR to go when I need to access the coals.  I went with concrete, because I wanted something durable, stain resistant, and able to withstand heat.  I crack open the mold tomorrow. I'll flip it over to see how it took to the melamine.  I'm excited, but nervous.  Hopefully I'll have my own brag post in a week or so when it's finished!

That is going to look stunning!! What stain are you planning on using? Cant wait to see the top!

Jcnewegg

johnkitchens said:

johnkitchens said:

Love the color and gloss, very nice!!

Jcnewegg

These are awesome looking tables!! I am getting some ideas now!! Keep them coming guys and thank you for the time to post!!

Begger

A Google Sketchup Rendering of planned table.  

Proser

Here's mine. Still working out well

NPHuskerFL

@A31unit The cart was purchased from Sam's Club but, can also be found online. It's manufactured by Seville

nolaegghead

nolaegghead

Proser

@nolaegghead love the pecky cypress, did you fill the voids? They look solid

nolaegghead

@Proser - Thank you sir!  yes, used marine epoxy.  On the legs I used polyester resin.