Welcome to the EGGhead Forum - a great place to visit and packed with tips and EGGspert advice! You can also join the conversation and get more information and amazing kamado recipes by following Big Green Egg to Experience our World of Flavor™ at:
Facebook  |  Twitter  |  Instagram  |  Pinterest  |  Youtube  |  Vimeo
Share your photos by tagging us and using the hashtag #BigGreenEgg.

Want to see how the EGG is made? Click to Watch

Another Project - $50 Globe Slicer

WeberWho
WeberWho Posts: 11,526
in EggHead Forum
Well......I picked up another project on Craigslist. It's a late 30's early 40's Globe 75 slicer. I couldn't resist the price. It's definitely a project. It currently works as a slicer but needs some tlc. It has the original motor that runs but will need to be taken apart and cleaned. The slicer is friction driven and one of the rubber gears has harden after 75 - 80 years. It will be interesting if I can find a new replacement. The slicer should be almost dead quiet but makes a slight noise with the gear hardened. It's missing a handle on the gravity feed but can be machined in my dad's shop. I think the hardest part of the project will be fixing a crack in the aluminum knife guard. New replacement guards are out of the question. Not willing to spend $250+ on a safety guard. So I'll maybe have to find someone that knows how to weld aluminium. What I'm hoping to do is strip everything down and sandblast it before getting it powder coated. I'm thinking it might become a nice center piece in the kitchen. Obviously not an overnight project but something I might enjoy doing over time. Am I in over my head? Probably. It happens frequently with projects. My goal is under $300 for everything. If I can get a close to new functioning slicer that looks descent I'll be happy. Fingers crossed!



"The pig is an amazing animal. You feed a pig an apple and it makes bacon. Let's see Michael Phelps do that" - Jim Gaffigan

Minnesota
· Share on FacebookShare on Twitter

Comments

  • blasting
    blasting Posts: 6,262

    Nice!  The way you get yourself into projects, I suspect we are a lot alike!  Have fun.

    Phoenix 
    · Share on FacebookShare on Twitter
  • Carolina Q
    Carolina Q Posts: 14,831
    Awesome!

    http://www.oldhobartslicerparts.com/usedglobe75slierparts.html

    I hate it when I go to the kitchen for food and all I find are ingredients!                                                                                                                                                                                                                           

    Michael 
    Central Connecticut 

    · Share on FacebookShare on Twitter
  • RRP
    RRP Posts: 26,453
    That's a terrific project! BTW about the cracked aluminum guard...I rebuilt my Father's huge 1/2" Black & Decker drill with an all aluminum case. The  D handle at the back had a huge crack. I took the piece to a radiator repair shop and the guy only charged me $10 to weld it. BTW this drill is a monster with very low RPM but torque that is incredible!

    Re-gasketing the USA one yard at a time 
    · Share on FacebookShare on Twitter
  • theyolksonyou
    theyolksonyou Posts: 18,459
    RRP said:
    That's a terrific project! BTW about the cracked aluminum guard...I rebuilt my Father's huge 1/2" Black & Decker drill with an all aluminum case. The  D handle at the back had a huge crack. I took the piece to a radiator repair shop and the guy only charged me $10 to weld it. BTW this drill is a monster with very low RPM but torque that is incredible!

    My FIL has a very similar drill. It's a brute!

    i wish I could find project like this. I'm not patient enough to scout CL and usually the stuff I'm interested in is 1+ hr away. 

    Good luck!
    · Share on FacebookShare on Twitter
  • RRP
    RRP Posts: 26,453
    edited January 2016
    @WeberWho - about that hardened rubber gear - couldn't any machine shop worth its salt replicate it? Also if it's as hardened as you say couldn't the replacement be made out of aluminum maybe? 
    Re-gasketing the USA one yard at a time 
    · Share on FacebookShare on Twitter
  • WeberWho
    WeberWho Posts: 11,526
    blasting said:

    Nice!  The way you get yourself into projects, I suspect we are a lot alike!  Have fun.

    @blasting I drink the kool-aid way before any rational thoughts! =) About to finish up a two week stove project. I promised myself I wouldn't tear down the mixer until I finished the stove project. Somehow my wife puts up with me. 
    "The pig is an amazing animal. You feed a pig an apple and it makes bacon. Let's see Michael Phelps do that" - Jim Gaffigan

    Minnesota
    · Share on FacebookShare on Twitter
  • WeberWho
    WeberWho Posts: 11,526

    Carolina Q said:
    Awesome!

    http://www.oldhobartslicerparts.com/usedglobe75slierparts.html
    @Carolina Q  I came across that site when trying to figure out what model I had. Thanks for the link! Didn't you pick up some slicer in the past? I think I remember you saying that 
    "The pig is an amazing animal. You feed a pig an apple and it makes bacon. Let's see Michael Phelps do that" - Jim Gaffigan

    Minnesota
    · Share on FacebookShare on Twitter
  • TN_Egger
    TN_Egger Posts: 1,120
    knife guard is overrated. CT says you don't need it.
    Signal Mountain, TN
    · Share on FacebookShare on Twitter
  • Canugghead
    Canugghead Posts: 13,701
    edited January 2016
    TN_Egger said:
    knife guard is overrated. CT says you don't need it.
    agree, it's mandatory in fast paced industrial/commercial environment for legal compliance, for home use just use caution and common sense  =)
    canuckland
    · Share on FacebookShare on Twitter
  • fishlessman
    fishlessman Posts: 34,583
    RRP said:
    That's a terrific project! BTW about the cracked aluminum guard...I rebuilt my Father's huge 1/2" Black & Decker drill with an all aluminum case. The  D handle at the back had a huge crack. I took the piece to a radiator repair shop and the guy only charged me $10 to weld it. BTW this drill is a monster with very low RPM but torque that is incredible!

    have several drills like that and bigger, the high torque and low speed make them perfect for rolling/expanding boiler tubes to seal them in the head of a boiler/locamotive. thats what we use them for anyways. seen one catch, handle goes into the guys pocket, and tears the coveralls right off in a second and a half
    fukahwee maine

    you can lead a fish to water but you can not make him drink it
    · Share on FacebookShare on Twitter
  • Carolina Q
    Carolina Q Posts: 14,831
    edited January 2016
    WeberWho said:

    Carolina Q said:
    Awesome!

    http://www.oldhobartslicerparts.com/usedglobe75slierparts.html
    @Carolina Q  I came across that site when trying to figure out what model I had. Thanks for the link! Didn't you pick up some slicer in the past? I think I remember you saying that 
    Yep, I have a 1948 or so Globe 150. It makes some noise and sometimes I have to kick start the blade, but so far, it sure does the job. About $100 I think.

    I called Globe right after I got it to see if they still had any printed material (haha) and as suspected, they did not. Globe was sold at some point and all the old stuff disappeared. The guy I spoke to was an old timer and was very familiar with the old models. He suggested oldhobartslicerparts as well as https://www.alfaco.com and http://www.nbsparts.com

    Here's a restoration article on the 150 that might be of interest. 

    http://theprogrammingbutler.com/blog/archives/2008/11/22/globe-gravity-feed-slicer/

    And here's mine...

    Good luck!

    I hate it when I go to the kitchen for food and all I find are ingredients!                                                                                                                                                                                                                           

    Michael 
    Central Connecticut 

    · Share on FacebookShare on Twitter
  • WeberWho
    WeberWho Posts: 11,526
    @RRP Great story and thanks for the recommendation for welding. My dad has a welder but has done very little aluminum work. Might be worth a shot.

    I'm at work now but will take a picture of the rubber wheel when I get home and how it works
    "The pig is an amazing animal. You feed a pig an apple and it makes bacon. Let's see Michael Phelps do that" - Jim Gaffigan

    Minnesota
    · Share on FacebookShare on Twitter
  • WeberWho
    WeberWho Posts: 11,526
    @TN_Egger and @Canugghead

    The previous owner never used the guard when processing meats. But doesn't the guard help keep meat juice and small pieces from flying elsewhere?
    "The pig is an amazing animal. You feed a pig an apple and it makes bacon. Let's see Michael Phelps do that" - Jim Gaffigan

    Minnesota
    · Share on FacebookShare on Twitter
  • WeberWho
    WeberWho Posts: 11,526
    Thanks for the links @Carolina Q and picture of your slicer. It looks to be in nice shape. I believe I read somewhere that Globe was sold in 1991 if I'm not mistaking 
    "The pig is an amazing animal. You feed a pig an apple and it makes bacon. Let's see Michael Phelps do that" - Jim Gaffigan

    Minnesota
    · Share on FacebookShare on Twitter
  • WeberWho
    WeberWho Posts: 11,526
    edited January 2016
    RRP said:
    @WeberWho - about that hardened rubber gear - couldn't any machine shop worth its salt replicate it? Also if it's as hardened as you say couldn't the replacement be made out of aluminum maybe? 
    @RRP I had a chance tonight to snap a few pictures of what I believe is called the friction drive knob. This is connected to the motor shaft that creates friction and spins the back part of the blade housing. (I flipped the blade around to show you where the drive knob meets the blade housing) Since the knob has started to harden it causes the blade to slip a little when putting it under load. This wouldn't happen with a new rubber grip. Unfortunately I can't find any new friction drive knobs. Any old available parts are going to have a same hardened issue. I have a feeling it's going to have to be custom made. I just don't think there are too many parts available especially with it being friction driven. It's an odd ball model.
     
    "The pig is an amazing animal. You feed a pig an apple and it makes bacon. Let's see Michael Phelps do that" - Jim Gaffigan

    Minnesota
    · Share on FacebookShare on Twitter
  • RRP
    RRP Posts: 26,453
    I hope I didn't mislead you as I'm hobbyist wood worker whatever plus retired financial guy and not a machinist. Adding a rubber drum shouldn't be that difficult if the metal post and bearing are still good. Good luck! 
    Re-gasketing the USA one yard at a time 
    · Share on FacebookShare on Twitter
  • Carolina Q
    Carolina Q Posts: 14,831
    This it? Might be worth a call.

    http://www.onesharpstore.com/catalog/item/1736798/3618591.htm

    I hate it when I go to the kitchen for food and all I find are ingredients!                                                                                                                                                                                                                           

    Michael 
    Central Connecticut 

    · Share on FacebookShare on Twitter
  • WeberWho
    WeberWho Posts: 11,526
    edited January 2016
    RRP said:
    I hope I didn't mislead you as I'm hobbyist wood worker whatever plus retired financial guy and not a machinist. Adding a rubber drum shouldn't be that difficult if the metal post and bearing are still good. Good luck! 
    @RRP I believe it's all 1 piece. Going to pull once I have a little more time tomorrow 
    "The pig is an amazing animal. You feed a pig an apple and it makes bacon. Let's see Michael Phelps do that" - Jim Gaffigan

    Minnesota
    · Share on FacebookShare on Twitter
  • WeberWho
    WeberWho Posts: 11,526

    Carolina Q said:
    This it? Might be worth a call.

    http://www.onesharpstore.com/catalog/item/1736798/3618591.htm

    @Carolina Q Thanks for the link. I'll have to see if it's new or if it's a previously used part. I appreciate the help! 
    "The pig is an amazing animal. You feed a pig an apple and it makes bacon. Let's see Michael Phelps do that" - Jim Gaffigan

    Minnesota
    · Share on FacebookShare on Twitter
  • Jeepster47
    Jeepster47 Posts: 3,827
    Check out these old school KitchenAid mixers! The mixer on the left is a 1917 Model H KitchenAid. This was the first KitchenAid mixer made for home use. It was modeled after the ones used on WWI battleships. The mixer on the right is a KitchenAid Model F mixer from the 30s-40s. #tbt #estatesales

    The attachment on the 1917 unit is a coffee grinder ... folks said it would fit on today's models.

    Washington, IL  >  Queen Creek, AZ ... Two large eggs and an adopted Mini Max

    · Share on FacebookShare on Twitter
  • nolaegghead
    nolaegghead Posts: 42,109
    @Jeepster47 I...I...I think I love you, man.
    ______________________________________________
    I love lamp..
    · Share on FacebookShare on Twitter
  • The Cen-Tex Smoker
    The Cen-Tex Smoker Posts: 23,179
    TN_Egger said:
    knife guard is overrated. CT says you don't need it.
    Knife guards are for The weak. Real men (and ladies) slice naked. 
    Keepin' It Weird in The ATX FBTX
    · Share on FacebookShare on Twitter
  • WeberWho
    WeberWho Posts: 11,526
    @Jeepster47 Those mixers are cool! Especially that model H. They would look great sitting up on a kitchen shelf as is. Thanks for the pic
    "The pig is an amazing animal. You feed a pig an apple and it makes bacon. Let's see Michael Phelps do that" - Jim Gaffigan

    Minnesota
    · Share on FacebookShare on Twitter
  • WeberWho
    WeberWho Posts: 11,526

    The Cen-Tex Smoker said:
    TN_Egger said:
    knife guard is overrated. CT says you don't need it.
    Knife guards are for The weak. Real men (and ladies) slice naked. 
    @The Cen-Tex Smoker When you have the guards removed when slicing doesn't it throw juice/food everywhere?
    "The pig is an amazing animal. You feed a pig an apple and it makes bacon. Let's see Michael Phelps do that" - Jim Gaffigan

    Minnesota
    · Share on FacebookShare on Twitter

Categories