Welcome to the EGGhead Forum - a great place to visit and packed with tips and EGGspert advice! You can also join the conversation and get more information and amazing kamado recipes by following Big Green Egg to Experience our World of Flavor™ at:
Want to see how the EGG is made? Click to Watch
Facebook | Twitter | Instagram | Pinterest | Youtube | Vimeo
Share your photos by tagging us and using the hashtag #BigGreenEgg.
Share your photos by tagging us and using the hashtag #BigGreenEgg.
Want to see how the EGG is made? Click to Watch
Getting LGE into table
CaptMike
Posts: 10
Hello there. We just had a beautiful cedar table built for our LGE. We now have to get it into the hole in the table. Is there any conventional wisdom on the best way to do this? We have a stone to set it on, and the table was measured to fit this EGG. Just lift and do your best, or take it apart? Any helpful tips would be appreciated. Thank you.
Comments
-
To avoid catastrophe, I decided to take mine apart. It is just too easy to do vs. the alternative. I think the whole process of getting the egg apart, out of the nest, into the table and back together again was about a half hour of time.
-
My wife and took ours out and in like this:
take out fire box and ring
use a ratcheting strap through top vent out bottom vent and behind the handle.
You can lift by hinge and handle
shes 5'4" buck 25. No issues. -
Also, do yourself a favor and get a table nest to sit place the egg on. Air gap is the best insulator to ensure that your egg doesn't start your table on fire. Paver stones will eventually crack and may cause your table to burn.L x2, M, S, Mini and a Blackstone 36. She says I have enough now....eggAddict from MN!
-
My wife and I put ours in without too much grief. We removed the guts of course. I set a wood box tall enough to where I could comfortably drop the egg into the hole, and where I could still get my hands into the bottom vent for lowering once it was on the box. From there I lifted the from the front and she from the back, knocked the box out of the way and lowered onto some ceramic feet on top of a paver.Highland, MI
L BGE, Primo, and a KJ Jr -
I took mine apart when we moved last time and it made the process very easy, and reduced the risk of dropping anything.
my method, take egg apart, and using the lower vent as a hand hold - was able to 1 arm it into the table, while I used my other hand to steady the table/guide into place over the BGE ceramic feet.
reassemply only took maybe 15 minutes - so really, very little added effort.[Insert clever signature line here] -
I took the insides of mine out and had a couple of buddies come over. If I broke my eggs I would be devastated!
Louisville, GA - 2 Large BGE's -
Any hungry neighborhood kids around??? Offer payment in the form of ribs or a pizza.... Works for me every time! I've even recruited a couple of high school football players in to help!
LBGE #19 from North GA Eggfest, 2014
Stockbridge, GA - just south of Atlanta where we are covered up in Zombies! #TheWalkingDead films practically next door!
-
IMO you just take it apart, and then reassemble.
-SMITTY
from SANTA CLARA, CA
-
Where do you live ? Never know if there is a member near by who might be able to help.
-
Pot lifters.
-
Yes: Pot Lifters
No: Pot Stickers
______________________________________________I love lamp.. -
I just opened the bottom vent, reached inside the egg and lifted from the vent hole while the lid rested on my shoulder. A buddy helped by lifting from the hinge assembly. Was relatively easy for the 2 of us.
-
Huh. I put my table on its side, put the egg in, and lifted the whole thing up.
-
Mine was all apart. I tried using the pot lifter for a test fit before finishing the table. It lifted the egg great, but it squeezed between the table and the egg. I didn't like how high you have to set the pot lifter on the egg. Pulling it out I reached through and grabbed it out the bottom vent.
When the table was finished, I just grabbed the empty base with my forearms near the top and lifted/lowered it into place. Not something I would want to a lot of times, but it wasn't hard to do just the one time. Yes, that's the same area that the pot lifter would have the grab the base, but I can feel if the base is slipping out when lifting with the forearms.
Aledo, Texas
Large BGE
KJ Jr.
Exodus 12:9 KJV
Eat not of it raw, nor sodden at all with water, but roast with fire; his head with his legs, and with the purtenance thereof. -
I've seen that method suggested before, but didn't you still need a helper to lift it back up or do you just have a strong back?Mosca said:Huh. I put my table on its side, put the egg in, and lifted the whole thing up.Re-gasketing America one yard at a time. -
I had a neighbor who was willing to help me lift the egg, so I did not take mine apart. It went in pretty smoothly.
Large Big Green Egg
Weber Gold
Old Smokey
San Diego, Ca -
Or do you know someone with an engine hoist? Surely you know a shadetree mechanic somewhere.... Chain that puppy up and lift away.....
LBGE #19 from North GA Eggfest, 2014
Stockbridge, GA - just south of Atlanta where we are covered up in Zombies! #TheWalkingDead films practically next door!
-
https://www.youtube.com/watch?v=LSw3hNFyvnM
I am going to make the rope handles, use a couple of NRS straps, and enlist Mama to try this method. It looks pretty straight forward. Thank you for all the input. -
I just took the guts out and easied it in. The hardest part is getting a hand back on the bottom once you get it going through the opening.Dyersburg, TN
-
I went to Harbor Frieght and purchased for $89 an engine lift! Seems like an over kill BUT I plan on making tables for other people so it was worth the investment not to mention my back! But check out the pics!
Both a large and an extra large! I can remove and replace anytime at will! No worries!
-
@CaptMike here is my finished table!
-
-
I have the Pot Lifter. It does a great job. I also use it for moving my large Meyer lemon pot around on my deck. The Pot lifter is a great back saver.nolaegghead said:Yes: Pot Lifters
No: Pot Stickers -
We just put it in. I made four rope handles out of old rope, used one six foot NRS strap, and another made up of two three foot straps. I took the guts out, and we lifted it in. It was a piece of cake. Surprisingly so. We set it on a LGE table nest. It was easy to adjust once in place. The table is soaked from a couple of weeks of rain up here in Alaska. Can't wait to get EGGing. Thank you all for your comments.
-
PMG, nice table. All you need is a beer tap, and you would have all the elements needed for life.
-
Great design and build. What's the PVC tube for?
Any road will take you there if you don't know where you're going.
Terry
Rockwall, TX -
Holy hell! What a view!
-
-
I had the same issue. How do I put in my BGE into a table I got from JJGeorge (See post above). I called SD Grill Pros 20 miles away.to ask. They are the best BGE dealer in all of San Diego county. I was astounded at their reply, considering I've only purchased accessories from them: "We are happy to come by and put the BGE in for you without a charge". Now that's great service!
-
I'll bet the PVC is for an umbrella holder.....
LBGE #19 from North GA Eggfest, 2014
Stockbridge, GA - just south of Atlanta where we are covered up in Zombies! #TheWalkingDead films practically next door!
Categories
- All Categories
- 182.7K EggHead Forum
- 15.7K Forum List
- 459 EGGtoberfest
- 1.9K Forum Feedback
- 10.3K Off Topic
- 2.2K EGG Table Forum
- 1 Rules & Disclaimer
- 9K Cookbook
- 12 Valentines Day
- 91 Holiday Recipes
- 223 Appetizers
- 516 Baking
- 2.4K Beef
- 88 Desserts
- 163 Lamb
- 2.4K Pork
- 1.5K Poultry
- 30 Salads and Dressings
- 320 Sauces, Rubs, Marinades
- 543 Seafood
- 175 Sides
- 121 Soups, Stews, Chilis
- 35 Vegetarian
- 100 Vegetables
- 312 Health
- 292 Weight Loss Forum