Welcome to the EGGhead Forum - a great place to visit and packed with tips and EGGspert advice! You can also join the conversation and get more information and amazing kamado recipes by following Big Green Egg to Experience our World of Flavor™ at:
Want to see how the EGG is made? Click to Watch
Facebook | Twitter | Instagram | Pinterest | Youtube | Vimeo
Share your photos by tagging us and using the hashtag #BigGreenEgg.
Share your photos by tagging us and using the hashtag #BigGreenEgg.
Want to see how the EGG is made? Click to Watch
Can you over heat an egg?
Options
qprhooligan
Posts: 126
This weekend we fired up the lbge and left all vets open and the temp got up to what would seem over 1000 deg. I thought 700 deg or so was max. Will this hurt anything?
Comments
-
without a fan, wide open it maxes out somewhere around 1200 dome temp, what can happen is that the bands grow with thermal expansion, they will get loose enough that the dome may fall out when you open the egg. i notice the bands getting loose around 900 on extended long cooks like several pizzas, doesnt usually happen when done quicker like for searing some syeaks
fukahwee maineyou can lead a fish to water but you can not make him drink it -
This weekend we fired up the lbge and left all vets open and the temp got up to what would seem over 1000 deg. I thought 700 deg or so was max. Will this hurt anything?
Short Answer: NO, it won't hurt anything.
Longer answer: Did it look like it hurt anything? Meaning, did you see a crack develop? And by "700 deg max" do you mean that you heard the Egg was supposed to only be taken up to 700 degrees, or that's what your thermometer maxes out at? The Egg can go higher than what your temp reads.
FWIW, I believe the Egg has been tested to heats well above 1000 degrees.
However, I do NOT know if BGE Corp has stated anywhere that the Egg should NOT exceed "XXXX" Temperature. That doesn't mean one should hook up a leaf blower to the bottom vent & see if they can use their Egg as a welding crucible however 8-|
Furthermore, I have absolutely no idea why anyone would want to have their Egg up to that high, unless they're smelting lead or something. Do you cast your own bullets? )
I have had mine probably close to that once (to do a high temp clean burn), but I wouldn't make it a habit of getting it that hot, even if it's OK to do so, JMHO. I've since learned I can get the same effect from the clean burn at lower temps (800* or so, I think).
HTH,
Rob
Don't get set into one form, adapt it and build your own, and let it grow, be like water. Empty your mind, be formless, shapeless — like water. Now you put water in a cup, it becomes the cup... Now water can flow or it can crash. Be water, my friend. - Bruce Lee -
ive done lead fishing weightsThis weekend we fired up the lbge and left all vets open and the temp got up to what would seem over 1000 deg. I thought 700 deg or so was max. Will this hurt anything?
Short Answer: NO, it won't hurt anything.
Longer answer: Did it look like it hurt anything? Meaning, did you see a crack develop? And by "700 deg max" do you mean that you heard the Egg was supposed to only be taken up to 700 degrees, or that's what your thermometer maxes out at? The Egg can go higher than what your temp reads.
FWIW, I believe the Egg has been tested to heats well above 1000 degrees.
However, I do NOT know if BGE Corp has stated anywhere that the Egg should NOT exceed "XXXX" Temperature. That doesn't mean one should hook up a leaf blower to the bottom vent & see if they can use their Egg as a welding crucible however 8-|
Furthermore, I have absolutely no idea why anyone would want to have their Egg up to that high, unless they're smelting lead or something. Do you cast your own bullets? )
I have had mine probably close to that once (to do a high temp clean burn), but I wouldn't make it a habit of getting it that hot, even if it's OK to do so, JMHO. I've since learned I can get the same effect from the clean burn at lower temps (800* or so, I think).
HTH,
Rob
fukahwee maineyou can lead a fish to water but you can not make him drink it -
As has already been said the bands loosen. There's also a better than average chance of torching your gasket. Last time I did pizza at ultra high temps I also cracked the fire ring, which is not a big deal at all but I thought I'd mention it. So far I've had my XL at those temps 3 different times and I've had to loosen all the bolts and re-do the lid adjustment - you guessed it - 3 different times.XL BGE
-
There was a post a couple of years ago that mentioned to what "cone" the Egg ceramics are fired. Can't find a link. I recall at the time looking up charts on ceramic cone temperatures (FWIW, the cones are placed in a kiln, and at certain temperatures and times, they slump over, showing how hot the ceramics are.) Assuming the post was correct, the Egg ceramics are fired up above 2000F, high enough that the burning lump can't melt it.
I'd guess that there is a bigger hazard from accumulated moisture freezing, and expanding the ceramics enough to crack them.
-
"I'd guess that there is a bigger hazard from accumulated moisture freezing, and expanding the ceramics enough to crack them" that was the issue with the earthenware eggs. this stuff is refractory ceramic, and according to the 'space age' claim (hahaha) i think is much more tolerant of freeze thaw
ed egli avea del cul fatto trombetta -Dante -
I had one of my larges up around 1000 and I heard a loud crack and thought it was lump popping or something. A couple minutes later there was another load pop so I shut it down. My fire ring cracked into 2 pieces and the base of the egg also cracked. I don't take my larges over 700 anymore. I had taken them that hot before but that time it didn't like it. I really have no need to keep my larges over 550 that's the temp I do pizzas at and when searing on the spider it isn't at temps long enough to get the ceramic too hot.
-
How'd you get it that hot? I've never been able to get my XL over 600F.--Dave from Leesburg, VA BGE XL, Viking 42", Firepit with $16 grill
-
How'd you get it that hot? I've never been able to get my XL over 600F.
Light your lump in several places. -
At least 2 problems -1. you will fry your gasket and if you don't like smoke escaping from the area where the dome closes on the base, you'll have to replace it.2. The last time I did a clean burn with the plate setter legs down, one of the legs of the plate setter cracked off and I got a crack in the top part of the fire ring.They may have tested it at high temps, but there some of the accessories that seem unable to handle it
Categories
- All Categories
- 182.8K EggHead Forum
- 15.7K Forum List
- 459 EGGtoberfest
- 1.9K Forum Feedback
- 10.3K Off Topic
- 2.2K EGG Table Forum
- 1 Rules & Disclaimer
- 9K Cookbook
- 12 Valentines Day
- 91 Holiday Recipes
- 223 Appetizers
- 516 Baking
- 2.4K Beef
- 88 Desserts
- 165 Lamb
- 2.4K Pork
- 1.5K Poultry
- 30 Salads and Dressings
- 320 Sauces, Rubs, Marinades
- 543 Seafood
- 175 Sides
- 121 Soups, Stews, Chilis
- 36 Vegetarian
- 100 Vegetables
- 313 Health
- 293 Weight Loss Forum