Share your photos by tagging us and using the hashtag #BigGreenEgg.
Want to see how the EGG is made? Click to Watch
Three minute pizza
Several years ago, I experienced my first piece of “gourmet” pizza from an authentic wood burning oven. From that moment I was hooked on good pizza. In fact, I was so hooked that I built my own wood burning oven. I have had good fun cooking three minute pizzas for my friends in that oven. However, I have got to tell you, it is a lot of work. It takes a great deal of fuel to get to temp and I sure don’t want to crank it up during our South Florida summers. I now reserve that entertainment for our occasional cold winter day.
The trouble is I like to eat good pizza year round. Fortunately, I can get the same quality with a fraction of the effort by cooking pizza in my BGEs. Here is how I cook a 3 minute pizza on a large BGE:
1. Clean out fire box, put in a fresh load of fuel and start fire with vents fully open and no top cover.
2. Install first platesetter with legs up.
3. Install standard grill grate on top of PS legs.
4. Install a “thin” pizza stone on top of grate.
5. Straddle a second platesetter over the pizza stone with legs down. (Use fireproof shims to raise the PS to the highest point where it does not hit the dome when the lid is closed)
6. Wait for the dome temp to reach at least 700. Higher is better.
7. Insert pizza under the top PS and on top of the pizza stone.
8. Check pizza after 2 1/2 minutes.
9. Remove fully cooked pizza with tongs.
The dough springs to life as soon as it is placed in the Egg. I use a “thin” stone, because it has less thermal mass than a thicker stone and actually extends the time I can leave the pie in the Egg while the top has time to cook. (Usually 3 minutes or less)
My wife called the office this afternoon with a request for pizza. I did not have time to proof the dough so I picked up a piece of dough from Publix. (All they had defrosted was whole wheat.) This is the “three minute” whole wheat sausage pizza that that she requested:
Comments
-
That's a very unique set up...at least nothing I've seen thus far.
I imagine the heat reflects off the 2nd plate setter giving you a wood burning over feel. Question, would putting the pie real high in the dome accomplish the same feat as the heat will reflect in the dome? I know the AR w/the rig extender gets it really high.Just a hack that makes some $hitty BBQ.... -
Pie looks great!! Do you have any pics of pies using your dough? What recipe do you use??Just a hack that makes some $hitty BBQ....
-
That's a very unique set up...at least nothing I've seen thus far. I imagine the heat reflects off the 2nd plate setter giving you a wood burning over feel. Question, would putting the pie real high in the dome accomplish the same feat as the heat will reflect in the dome? I know the AR w/the rig extender gets it really high.
I frequently tried the high dome method but personally find this method gives better results.
-
As soon as I saw your first picture before I even read the post I said, "Why didn't I think of that?" That's a great idea. I'm going to have to try it.XL BGE
-
See how you have a wood burning oven for comparison, that statement has a lot of weight. Thanks a bunch for posting...this will be bookmarked!!billybon said:
I frequently tried the high dome method but personally find this method gives better results.cazzy said:That's a very unique set up...at least nothing I've seen thus far.
I imagine the heat reflects off the 2nd plate setter giving you a wood burning over feel. Question, would putting the pie real high in the dome accomplish the same feat as the heat will reflect in the dome? I know the AR w/the rig extender gets it really high.
Just a hack that makes some $hitty BBQ.... -
No kidding...very intuitive this guy is. I don't own a plate setter, but I may be on the market for one now!!chuff said:As soon as I saw your first picture before I even read the post I said, "Why didn't I think of that?" That's a great idea. I'm going to have to try it.
Just a hack that makes some $hitty BBQ.... -
Newbie here. Is the second plate setter the same size as the first? In other words...are both the same size?
-
I've got two plate setters, I think I will have to try this.
XXL #82 out of the first 100, XLGE X 2, LBGE (gave this one to daughter 1.0) , MBGE (now in the hands of iloveagoodyoke daughter 2.0) and lots of toys -
Newbie here. Is the second plate setter the same size as the first? In other words...are both the same size?
They look like the same size to me. Ingenious setup. You basically are cooking at lid height and have rigged up an IR broiler.
______________________________________________I love lamp.. -
Newbie here. Is the second plate setter the same size as the first? In other words...are both the same size?
In my case, the 2 platesetters are the same size. If you had a smaller PS on the top you could get a litter more elevation. However, that means a smaller pie. Of course, if you had an extra large BGE you cold use the PS from a large and that would be ideal.
-
Nevermind...I saw it. Great 1st Thread sir!! =D>Just a hack that makes some $hitty BBQ....
-
What size is your egg??
This pie was cooked on a large.
-
Great idea...thank you!
-
Thanks for the compliment. And yes, I was going for a broiler effect. In fact, we call this set-up a "Billybon broiler".Newbie here. Is the second plate setter the same size as the first? In other words...are both the same size?
They look like the same size to me. Ingenious setup. You basically are cooking at lid height and have rigged up an IR broiler.
-
Well done, sir!!!!! Great idea. In an oven, a lot of people put their stone on the lowest rack, but you should really put it on the highest to let the heat bounce of the top back on the pizza. This accomplishes the same effect but on the Egg. :-bdSarasota, FL via Boynton Beach, FL, via Sarasota, FL, via Charleston, SC, via The Outer Banks, via God's Country (East TN on Ft. Loudon Lake)
-
Do you offset the legs of the second plate setter to the first or do you think it matters for reflecting the heat? Great idea.
-
Do you offset the legs of the second plate setter to the first or do you think it matters for reflecting the heat? Great idea.
I have always aligned the legs. Whenever I use an indirect PS I put one leg to the rear to avoid the common hot spot issue directly across from the air intake. That being said, the configuration of the top PS is dictated by having to slide the peel in from the front. (Thus a leg to the rear again) If you wanted to experiment you could certainly change the position of the lower PS.
-
billybon - is the thickness of the BGE brand pizza stone what you mean as a "thin" pizza stone. Looks like more accessories are going to show up on my porch. When the wife complains I remind her she bought the egg and started the whole thing!
Mama always said, Grilling was like a box of chocolates. You never know what you're gonna get. -
Brilliant idea! Echoing a previous comment, why didn't I think of that. ^:)^Marietta, East Cobb, GA
-
billybon - is the thickness of the BGE brand pizza stone what you mean as a "thin" pizza stone. Looks like more accessories are going to show up on my porch. When the wife complains I remind her she bought the egg and started the whole thing!
Yes, that pie was cooked on a BGE stone.
-
I can't believe I'm going to have to buy another plate setter now.... Thanks for nothing! )XL BGE
-
I can't believe I'm going to have to buy another plate setter now.... Thanks for nothing! )
Why stop there? For the adventurous that want maximum temp hitting the top of the pizza, the broiler affect can be insane if you place a cast iron pan full of hot coals on the top of the upper PS. I does work but you must be very careful.
Sure you don't want to also get the CI pan?
-
I can't believe I'm going to have to buy another plate setter now.... Thanks for nothing! )
Why stop there? For the adventurous that want maximum temp hitting the top of the pizza, the broiler affect can be insane if you place a cast iron pan full of hot coals on the top of the upper PS. I does work but you must be very careful.
Sure you don't want to also get the CI pan?
Did you actually try that?____________________Entrepreneurs are simply those who understand that there is little difference between obstacle and opportunity and are able to turn both to their advantage. •Niccolo Machiavelli -
Yes!I can't believe I'm going to have to buy another plate setter now.... Thanks for nothing! )
Why stop there? For the adventurous that want maximum temp hitting the top of the pizza, the broiler affect can be insane if you place a cast iron pan full of hot coals on the top of the upper PS. I does work but you must be very careful.
Sure you don't want to also get the CI pan?
Did you actually try that?
-
-
@billybon I absolutely HATE when I am perfectly satisfied with the way I do something and then somebody comes along with something that I absolutely HAVE to try. Ingenious setup. ^:)^
-
Off to buy another place setter for pizzas tomorrow. Such a great idea!! :-O
-
Well done great job thinking/cooking outside the box. And they say the egg isn't versatile. Will be borrowing that method.Large, small and mini now Egging in Rowlett Tx
-
I dunno who "they" are, I've always thought the egg is versatile. It grills, sears, roasts, smokes, braises, steams, broils...it slices, it dices...
______________________________________________I love lamp..
Categories
- All Categories
- 182.7K EggHead Forum
- 15.7K Forum List
- 459 EGGtoberfest
- 1.9K Forum Feedback
- 10.3K Off Topic
- 2.2K EGG Table Forum
- 1 Rules & Disclaimer
- 9K Cookbook
- 12 Valentines Day
- 91 Holiday Recipes
- 223 Appetizers
- 516 Baking
- 2.4K Beef
- 88 Desserts
- 163 Lamb
- 2.4K Pork
- 1.5K Poultry
- 30 Salads and Dressings
- 320 Sauces, Rubs, Marinades
- 543 Seafood
- 175 Sides
- 121 Soups, Stews, Chilis
- 35 Vegetarian
- 100 Vegetables
- 313 Health
- 293 Weight Loss Forum