Share your photos by tagging us and using the hashtag #BigGreenEgg.
Want to see how the EGG is made? Click to Watch
Fire Brick or New Table Nest? Please Help.
GEAUX TIGERS!!!!!!!!!
Comments
-
I really like pictures I see where a wide slab of granite is under the egg. Looks attractive and very functional for cleaning up ash. (flat, smooth, wide surface)
I have a wooden bottom shelf table with a smaller garden brick piece under egg. It stays messy from cleanout with ash and small burns on the brick ledge and the wooden shelf ledge from sparks popping out.
-
Another thread today titled "Yet another new table -- with table nest" has a great pic of new table nest sitting on granite. I think it looks better than my above pic.
GEAUX TIGERS!!!!!!!!!
-
Of course, all of my measurements were taken using the fire brick as the base. 2" table nest and 1.25" granite may still work.
GEAUX TIGERS!!!!!!!!!
-
I think the granite would look best!
-
I think you are headed to a nice looking setup - with either choice. Personally - I think the fire brick is a nice contrast.Cookin in Texas
-
I'd do the granite.
-
I don't mean to lead this thread astray, but I am curious what you used to cut those fire bricks into wedge shaped pieces so cleanly?
-
I just about choked when the granite guy gave me a quote of over $200 for 2 pieces of granite for my table. 18x18 and 18 x 25 inches.
I went to Home Depot and got 3 18" travertine tiles and used a tube of hi temp rated adhesive to attach them to 1/4" Hardi Backer board. This turned out to be the exact thickness of the 3/4" redwood I used for the table top. Perfect insets for less than $45.
Travertine + Hardi board might be an option for you too. You are obviously good with a masonry or tile saw.
-
I think either would look fine, but agree that the granite slab would look "cleaner" as well as clean up easier. Ash will fall into the fire brick cracks, which may or may not bother you. Another consideration is that there will probably be less wobble to the Egg on a smooth piece of granite and the table nest. Although I did notice that the Egg sways back a bit in the table nest when the lid is opened. Will your top surface have a round opening for the Egg? If so, then the slight swaying of the Egg will be impeded by the table top. Good luck!
-
I think either would look fine, but agree that the granite slab would look "cleaner" as well as clean up easier. Ash will fall into the fire brick cracks, which may or may not bother you. Another consideration is that there will probably be less wobble to the Egg on a smooth piece of granite and the table nest. Although I did notice that the Egg sways back a bit in the table nest when the lid is opened. Will your top surface have a round opening for the Egg? If so, then the slight swaying of the Egg will be impeded by the table top. Good luck!
It will have a rounded piece of granite in the back, but will be completely open in front. I went to my local dealer today who said he would order a table nest, but gave me a bunch of extra feet. He thought the egg - feet - granite would be fine.GEAUX TIGERS!!!!!!!!!
-
I don't mean to lead this thread astray, but I am curious what you used to cut those fire bricks into wedge shaped pieces so cleanly?
Brick guys have all the knowledge and tools. I just show up and critique. So far, they have been amazing with interior and exterior brick.GEAUX TIGERS!!!!!!!!!
-
If you do decide on granite - check around and find an installer. Talk to them about left over, scraps. I bought some for an outdoor area - very cheap.Cookin in Texas
-
you don't need firebrick, FWIW. firebrick is rated for direct radiant exposure ti much higher temps than the bottom of the egg will see. you could simply use the same brick you built the rest of the mass from.
granite might look nice too, and be easier to clean (although i don't mind ash on the brick or in the joints, i have a brick patio). but in either case, you may want the nest anyway. the egg could (might) rock a bit if it is sitting directly on different bricks. the feet of the nest would avoid that.
and there HAS been some cracking of stones when the egg was sitting directly on the stone itself. that doesn't mean it's crazy high heat, and requires firebrick, just that some stone is vulnerable (might be a thickness or specie issue too, dunno)
air (as from a nest or feet) will always be your simplest first line of insulation insurance, with stone or brick under that
ed egli avea del cul fatto trombetta -Dante -
I like the fire brick. As others have said it provides a nice contrast and I like the look and feel it will give to your outdoor kitchen/BBQ pit. Either way, it looks great, good luck!
-
you don't need firebrick, FWIW. firebrick is rated for direct radiant exposure ti much higher temps than the bottom of the egg will see. you could simply use the same brick you built the rest of the mass from.
Agree I don't think you would need firebrick either. I mean I use a paver stone under mine and it works fine. As far as getting granite find a local installer and see if they have any scraps. I just had a granite countertop installed and they cut the stove and sink here at my house. They left me both pieces because I asked for them, I am sure many people don't ask even though they pay for them.
granite might look nice too, and be easier to clean (although i don't mind ash on the brick or in the joints, i have a brick patio). but in either case, you may want the nest anyway. the egg could (might) rock a bit if it is sitting directly on different bricks. the feet of the nest would avoid that.
and there HAS been some cracking of stones when the egg was sitting directly on the stone itself. that doesn't mean it's crazy high heat, and requires firebrick, just that some stone is vulnerable (might be a thickness or specie issue too, dunno)
air (as from a nest or feet) will always be your simplest first line of insulation insurance, with stone or brick under that -
firebrick isn't really a 'finish' brick. most times we couldn't dirty it fast enough for the client, often building a fire as soon as possible in order to darken it and only using it at the back. the buttery yellow refractory ceramic color is a little overkill. lot of older chimneys (many around here that are a few hundred years old, one house i lived in had 400 year old chimneys) used 'klinkers', the hardest brick, from the center of the kiln. once in a while one would crack or spall, but the chimneys were solid and it caused no structural or fire issues.
personally, purely aesthetically, i think firebrick is not very attractive. if you want accent, consider a more sympathetic material like stone. i'd try the same brick you have already, on edge. maybe even a herringbone or other (basketweave) pattern inset in the middle. they're going to be cutting brick anyway
ed egli avea del cul fatto trombetta -Dante -
-
Well, I went with the granite. Don't move into the new house for another 3 weeks.
GEAUX TIGERS!!!!!!!!!
-
Looks good. IMHO the granite makes it look finished.Bx - > NJ ->TX!!!All to get cheaper brisket!
-
Looks great. Good call on the granite.
-
Any BGE would be happy with a home like that, I can't let my egg see that setup or it may pack its bags and move on... Well Done!
-
Nice job! That looks great!Sarasota, FL via Boynton Beach, FL, via Sarasota, FL, via Charleston, SC, via The Outer Banks, via God's Country (East TN on Ft. Loudon Lake)
-
Any BGE would be happy with a home like that, I can't let my egg see that setup or it may pack its bags and move on... Well Done!
I did wait about 4 years before, but it has definately earned it's keep.
GEAUX TIGERS!!!!!!!!!
-
I am impressed. You are clearly far more skilled than I am.
-
-
I am impressed. You are clearly far more skilled than I am.
It's all in the checkbook!GEAUX TIGERS!!!!!!!!!
-
-
-
That's a pretty awesome looking set up. Minus the LSU reference. Smoke up some Honey Badger this weekend.
=======================================
XL 6/06, Mini 6/12, L 10/12, Mini #2 12/14 MiniMax 3/16 Large #2 11/20 Legacy from my FIL - RIP
Tampa Bay, FL
EIB 6 Oct 95 -
Nicely done
Categories
- All Categories
- 182.7K EggHead Forum
- 15.7K Forum List
- 459 EGGtoberfest
- 1.9K Forum Feedback
- 10.3K Off Topic
- 2.2K EGG Table Forum
- 1 Rules & Disclaimer
- 9K Cookbook
- 12 Valentines Day
- 91 Holiday Recipes
- 223 Appetizers
- 516 Baking
- 2.4K Beef
- 88 Desserts
- 163 Lamb
- 2.4K Pork
- 1.5K Poultry
- 30 Salads and Dressings
- 320 Sauces, Rubs, Marinades
- 543 Seafood
- 175 Sides
- 121 Soups, Stews, Chilis
- 35 Vegetarian
- 100 Vegetables
- 313 Health
- 293 Weight Loss Forum