Share your photos by tagging us and using the hashtag #BigGreenEgg.
Want to see how the EGG is made? Click to Watch
Need help with new handles for XL and L
Appreciate the help, and thanks.
Comments
-
I am assuming that you have the smaller handles that are about 6inches across?
They do have replacement handles for them, call over to Roswell Hardware and see if they have the smaller handles. I know they have the larger ones....
LBGE since 2014
Griffin, GA
-
How about a custom made handle? Alot of us around here have them. Check out this site and it will give you some ideas, mine is even pictured there. I'm not sure if Danny is still making them, but maybe someone else will chime in and point you in the right direction if you want a custom one.
http://dannyscarvings.blogspot.com/
Happily egging on my original large BGE since 1996... now the owner of 5 eggs. Call me crazy, everyone else does!
3 Large, 1 Small, 1 well-used Mini -
Roswell ain't got em and neither does Buford, both said they aren't made anymore. I could replace the bands on both for about $325 total..... ya, no. Buford ACE said he thinks the new small will fit the old L and XL. Thankfully i have a small to do that comparison at home but I think I would have noticed that.DaveRichardson said:I am assuming that you have the smaller handles that are about 6inches across?
They do have replacement handles for them, call over to Roswell Hardware and see if they have the smaller handles. I know they have the larger ones....
The Dude: This is a very complicated case, Maude. You know, a lotta ins, lotta outs, lotta what-have-you's. And, uh, lotta strands to keep in my head, man. Lotta strands in old Duder's head. Luckily I'm adhering to a pretty strict, uh, drug regimen to keep my mind, you know, limber.Walter Sobchak: Nihilists! *uck me. I mean, say what you want about the tenets of National Socialism, Dude, at least it's an ethos.Cumming, GAEggs - XL, L, SmallGasser - Blaze 5 Burner -
I'll send him an email later on tonight.Florida Grillin Girl said:How about a custom made handle? Alot of us around here have them. Check out this site and it will give you some ideas, mine is even pictured there. I'm not sure if Danny is still making them, but maybe someone else will chime in and point you in the right direction if you want a custom one.
http://dannyscarvings.blogspot.com/
The Dude: This is a very complicated case, Maude. You know, a lotta ins, lotta outs, lotta what-have-you's. And, uh, lotta strands to keep in my head, man. Lotta strands in old Duder's head. Luckily I'm adhering to a pretty strict, uh, drug regimen to keep my mind, you know, limber.Walter Sobchak: Nihilists! *uck me. I mean, say what you want about the tenets of National Socialism, Dude, at least it's an ethos.Cumming, GAEggs - XL, L, SmallGasser - Blaze 5 Burner -
Use the handles you have as a template and make some yourself. I recently did this for an older egg that I rehabbed and it was quite easy. I believe the handles are 3.5" or 4" long and about 3/4" thick. You just need to counter sink the holes for the bolts and apply liberal amounts of sealant and you'll be good to go.Formerly of Houston, TX - Now Located in Bastrop, TX
I work in the 'que business now (since 2017)
6 Eggs: (1) XL, (2) Large, (1) Small, (1) Minimax & (1) Mini - Egging since 2007
Also recently gained: (1) Gas Thing (came with the house), (1) 36" Blackstone Griddle & (1) Pitts & Spitts Pellet Smoker -
The new wooden handle for the mini/small/medium will fit the older Large Egg (just installed one).
Looks better and only ~$15 from a BGE dealer.
(and apply some polyurethane before installing) -
______________________________________________I love lamp..
-
Are you sure? Older large egg handles look like this:Tony_T said:The new wooden handle for the mini/small/medium will fit the older Large Egg (just installed one).
Looks better and only ~$15 from a BGE dealer.
(and apply some polyurethane before installing)
Or maybe I should call this an ancient egg? 
Southeast Florida - LBGE
In cooking, often we implement steps for which we have no explanations other than ‘that’s what everybody else does’ or ‘that’s what I have been told.’ Dare to think for yourself. -
That's pretty bada$$ nola. Gotta admit though, I haven't got the woodworking tools that you do. I'm more like Anthony Michael Hall in that my elephant lamp didn't light up in shop class.nolaegghead said:
The Dude: This is a very complicated case, Maude. You know, a lotta ins, lotta outs, lotta what-have-you's. And, uh, lotta strands to keep in my head, man. Lotta strands in old Duder's head. Luckily I'm adhering to a pretty strict, uh, drug regimen to keep my mind, you know, limber.Walter Sobchak: Nihilists! *uck me. I mean, say what you want about the tenets of National Socialism, Dude, at least it's an ethos.Cumming, GAEggs - XL, L, SmallGasser - Blaze 5 Burner -
Tony_T said:The new wooden handle for the mini/small/medium will fit the older Large Egg (just installed one).
Looks better and only ~$15 from a BGE dealer.
(and apply some polyurethane before installing)
I did hear that from my dealer but he said he wasn't sure. You have made it fact. Thanks man!!!!The Dude: This is a very complicated case, Maude. You know, a lotta ins, lotta outs, lotta what-have-you's. And, uh, lotta strands to keep in my head, man. Lotta strands in old Duder's head. Luckily I'm adhering to a pretty strict, uh, drug regimen to keep my mind, you know, limber.Walter Sobchak: Nihilists! *uck me. I mean, say what you want about the tenets of National Socialism, Dude, at least it's an ethos.Cumming, GAEggs - XL, L, SmallGasser - Blaze 5 Burner -
Pm me your email. I know I have seen them somewhere recently. I'll check some places that I drive by daily to see if they have 'em. Was it 1 or 2 that you were looking for?danv23 said:
Roswell ain't got em and neither does Buford, both said they aren't made anymore. I could replace the bands on both for about $325 total..... ya, no. Buford ACE said he thinks the new small will fit the old L and XL. Thankfully i have a small to do that comparison at home but I think I would have noticed that.DaveRichardson said:I am assuming that you have the smaller handles that are about 6inches across?
They do have replacement handles for them, call over to Roswell Hardware and see if they have the smaller handles. I know they have the larger ones....
LBGE since 2014
Griffin, GA
-
DaveRichardson said:
Pm me your email. I know I have seen them somewhere recently. I'll check some places that I drive by daily to see if they have 'em. Was it 1 or 2 that you were looking for?danv23 said:
Roswell ain't got em and neither does Buford, both said they aren't made anymore. I could replace the bands on both for about $325 total..... ya, no. Buford ACE said he thinks the new small will fit the old L and XL. Thankfully i have a small to do that comparison at home but I think I would have noticed that.DaveRichardson said:I am assuming that you have the smaller handles that are about 6inches across?
They do have replacement handles for them, call over to Roswell Hardware and see if they have the smaller handles. I know they have the larger ones....
Need 2. One for Large, one for XL.The Dude: This is a very complicated case, Maude. You know, a lotta ins, lotta outs, lotta what-have-you's. And, uh, lotta strands to keep in my head, man. Lotta strands in old Duder's head. Luckily I'm adhering to a pretty strict, uh, drug regimen to keep my mind, you know, limber.Walter Sobchak: Nihilists! *uck me. I mean, say what you want about the tenets of National Socialism, Dude, at least it's an ethos.Cumming, GAEggs - XL, L, SmallGasser - Blaze 5 Burner -
Really? The new long wooden ones will fit on the older ones like these?Tony_T said:The new wooden handle for the mini/small/medium will fit the older Large Egg (just installed one).
Looks better and only ~$15 from a BGE dealer.
(and apply some polyurethane before installing)
-
Gravytrain84 said:
Really? The new long wooden ones will fit on the older ones like these?Tony_T said:The new wooden handle for the mini/small/medium will fit the older Large Egg (just installed one).
Looks better and only ~$15 from a BGE dealer.
(and apply some polyurethane before installing)
Yes, but not the one for the new Large Egg.
Need to get the one that's listed for new a mini/small/medium for the old large.
Just installed one for my nephew. (need to screw the new one on from the back — and I was able to do it without removing the metal handle from the band) -
LBGE 2013 & MM 2014Die Hard HUSKER & BRONCO FANFlying Low & Slow in "Da Burg" FL
Categories
- All Categories
- 184K EggHead Forum
- 16.1K Forum List
- 461 EGGtoberfest
- 1.9K Forum Feedback
- 10.5K Off Topic
- 2.4K EGG Table Forum
- 1 Rules & Disclaimer
- 9.2K Cookbook
- 15 Valentines Day
- 118 Holiday Recipes
- 348 Appetizers
- 521 Baking
- 2.5K Beef
- 90 Desserts
- 167 Lamb
- 2.4K Pork
- 1.5K Poultry
- 33 Salads and Dressings
- 322 Sauces, Rubs, Marinades
- 548 Seafood
- 175 Sides
- 122 Soups, Stews, Chilis
- 40 Vegetarian
- 103 Vegetables
- 315 Health
- 293 Weight Loss Forum







https://youtu.be/WKBRtxcuysg