Welcome to the EGGhead Forum - a great place to visit and packed with tips and EGGspert advice! You can also join the conversation and get more information and amazing kamado recipes by following Big Green Egg to Experience our World of Flavor™ at:
Want to see how the EGG is made? Click to Watch
Facebook | Twitter | Instagram | Pinterest | Youtube | Vimeo
Share your photos by tagging us and using the hashtag #BigGreenEgg.
Share your photos by tagging us and using the hashtag #BigGreenEgg.
Want to see how the EGG is made? Click to Watch
Smokeware gasket?
Options
Eggbertsdad
Posts: 804
I just received my new Smokeware cap and the instructions say to put the felt on the BGE not inside the cap. Which way is the best way to install the gasket?
Thanks!
Sarasota, FL via Boynton Beach, FL, via Sarasota, FL, via Charleston, SC, via The Outer Banks, via God's Country (East TN on Ft. Loudon Lake)
Comments
-
I've always seen gaskets on the dome chimney, never on the cap... don't know why, probably because the cap gets replaced more often than the dome, right?
Indianapolis, IN
BBQ is a celebration of culture in America. It is the closest thing we have to the wines and cheeses of Europe.
Drive a few hundred miles in any direction, and the experience changes dramatically.
-
So on the dome, right? Don't know why I thought people put them in the cap. Does it go on the side or top of the dome?Sarasota, FL via Boynton Beach, FL, via Sarasota, FL, via Charleston, SC, via The Outer Banks, via God's Country (East TN on Ft. Loudon Lake)
-
What came first, the chicken or the egg? You are going to hear it from both sides, so let me put in my 2cents...I ratehr have the gasket on the DOME, I try to keep the SmokeWare cap clean. So that means that after 3-5 cooks, I put it in the sink and scrup the gunk off of it. I don't want the gasket to be soaking that crap all in it.My second point is this, I use the SW cap for cooking, but use the Ceramic Cap for shut-downs and in between uses. If the gasket is on the SW, I would then have to install a second gasket on the Ceramic Cap...I've had the original BGE gasket on the egg since day one (over a year), it still seals things TIGHT.
-
I have the gasket on the inside of the metal cap so I can switch between my large and medium. Works great.
-
I'll say I had the OEM gasket on the egg and SW was loose. Scraped that off and put the SW gasket on the cap and fit was tighter, but I've never had the SW gasket on the egg. If the gasket can stand the heat, surely it can handle some water.in the end, do what makes you happy, probably doesn't make much difference.
-
Thanks guys. I'm going to use this to snuff out the fire as well as my ceramic lid was broken and even though I glued it back together it doesn't seal well.Sarasota, FL via Boynton Beach, FL, via Sarasota, FL, via Charleston, SC, via The Outer Banks, via God's Country (East TN on Ft. Loudon Lake)
-
I'm an advocate of putting it on the inside of my SmokeWare cap. That way when I do a burn out to clean my egg the gasket is out of harms way rather than on the egg dome. Early on TNW posted pictures of his melted gasket which had been on the egg.
-
RRP said:I'm an advocate of putting it on the inside of my SmokeWare cap. That way when I do a burn out to clean my egg the gasket is out of harms way rather than on the egg dome. Early on TNW posted pictures of his melted gasket which had been on the egg.Sarasota, FL via Boynton Beach, FL, via Sarasota, FL, via Charleston, SC, via The Outer Banks, via God's Country (East TN on Ft. Loudon Lake)
-
I only use the SW cap as my ceramic is in about 50,000 pieces. No problem.
-
Eggbertsdad said:RRP said:I'm an advocate of putting it on the inside of my SmokeWare cap. That way when I do a burn out to clean my egg the gasket is out of harms way rather than on the egg dome. Early on TNW posted pictures of his melted gasket which had been on the egg.
I'm going on year 3 with my cap with the gasket applied inside and I have yet to revert to my old daisey or to my ceramic cap. My SmokeWare snuffs my egg quite well. There appears to have been more tolerance in a recent batch of caps, but my two pieces fit nicely and are air tight. BTW even if the fit between the two metal pieces are sloppy at first the creosote builds up and seals the area. -
Perfect! Thanks for the pic. That helps a ton!Sarasota, FL via Boynton Beach, FL, via Sarasota, FL, via Charleston, SC, via The Outer Banks, via God's Country (East TN on Ft. Loudon Lake)
Categories
- All Categories
- 182.8K EggHead Forum
- 15.7K Forum List
- 459 EGGtoberfest
- 1.9K Forum Feedback
- 10.3K Off Topic
- 2.2K EGG Table Forum
- 1 Rules & Disclaimer
- 9K Cookbook
- 12 Valentines Day
- 91 Holiday Recipes
- 223 Appetizers
- 516 Baking
- 2.4K Beef
- 88 Desserts
- 165 Lamb
- 2.4K Pork
- 1.5K Poultry
- 30 Salads and Dressings
- 320 Sauces, Rubs, Marinades
- 543 Seafood
- 175 Sides
- 121 Soups, Stews, Chilis
- 36 Vegetarian
- 100 Vegetables
- 313 Health
- 293 Weight Loss Forum