Welcome to the EGGhead Forum - a great place to visit and packed with tips and EGGspert advice! You can also join the conversation and get more information and amazing kamado recipes by following Big Green Egg to Experience our World of Flavor™ at:
Want to see how the EGG is made? Click to Watch
Facebook | Twitter | Instagram | Pinterest | Youtube | Vimeo
Share your photos by tagging us and using the hashtag #BigGreenEgg.
Share your photos by tagging us and using the hashtag #BigGreenEgg.
Want to see how the EGG is made? Click to Watch
I can't get it hot!
Options
I can't get my egg hot. I have a medium egg. I want to cook beer can chicken so I open the vents, throw a firestart in and some hardwood charcoal. No plate setter. 10 minutes later its flaming so i shut the lid and throw my chicken in. 45 minutes later with the vents open im only at 260. What am I doing wrong?
Comments
-
Fred Bedoink,[p]Your vents may be clogged in your firebox. Get a coathanger, bend it into a L shape, and go thru the bottom vent and clean out those holes. Hope this helps.
-
Fred Bedoink,
When starting your fire, put your coal in, then light the fire starter and place it in the coals and set a piece or two over it. Have the draft door open ant the lid closed with nothing on top. It should rise to 350 fairly quickly but that is the heat from the fire starter. The temp will drop at first then start to rise. Let it get to about 400 then put the daisy wheel on top with the small holes wide open and the large hole shut. Now give it at least 15-20 minutes for the smoke to quit being white. The temp should be right on 350. When the smoke is clean and the temp is stable, THEN put the food on. Have fun! -RP
-
Fred Bedoink, like said below, my large will hold 350 with the bottom vent wide open and the metal small vents wide open, (about 3/8") When learning to use the Egg try not to walk away from it till your sure you got it 100%, Go figure from the time you light the Egg till 350 may be as much as 30 minutes or more. Also make sure your lump is at least up to the bottom of the fire ring.
-
Fred Bedoink,
EVERYTHING........
-
Fred Bedoink,[p]If you cannot get is hot, your egg is probably ash-bound. Before each lighting, take a wooden stick and stir the old coals around, but not too vigorous as you may tilt the bottem coal grate and have to start from scratch. For me, I find that the fire lights best if I leave the top open for a short time with the bottem air control closed. It seems that the fire spreads out more quickly.
-
Fred Bedoink,
keep the lid shut when starting, to establish a good draft. lid open, you are feeding the fire top-down with no real draft since the area is huge. shut the dome, open vents, and you'll get a nice draft that should actually bring you to temp faster.[p]other thought is that you don't have enough lump.[p]...and don't wait to put the platesetter in. bring it up to temp while the egg is starting. it won't hurt one way or the other, you just don't get any benefit from putting it in after the egg is up to temp.
ed egli avea del cul fatto trombetta -Dante
Categories
- All Categories
- 182.7K EggHead Forum
- 15.7K Forum List
- 459 EGGtoberfest
- 1.9K Forum Feedback
- 10.3K Off Topic
- 2.2K EGG Table Forum
- 1 Rules & Disclaimer
- 9K Cookbook
- 12 Valentines Day
- 91 Holiday Recipes
- 223 Appetizers
- 516 Baking
- 2.4K Beef
- 88 Desserts
- 163 Lamb
- 2.4K Pork
- 1.5K Poultry
- 30 Salads and Dressings
- 320 Sauces, Rubs, Marinades
- 543 Seafood
- 175 Sides
- 121 Soups, Stews, Chilis
- 35 Vegetarian
- 100 Vegetables
- 313 Health
- 293 Weight Loss Forum