Share your photos by tagging us and using the hashtag #BigGreenEgg.
Want to see how the EGG is made? Click to Watch
The Royal Oak challenge
Been cooking on the egg now for a couple of months. started with big green egg lump and recently switched to royal oak. the big difference that i can tell is the big green egg lump was much bigger piences. the royal oak lump is just about all small pieces. ever since the switch, im having trouble getting my egg up to temp. once i get it there, keeping it there is easy, but getting it really hot is a real challenge. i find that i just have to leave everything wide open and slowly but surely the tempurature will rise to the appropriate cooking temps (but this could take over an hour). i believe this has something to do with the amount of air flow that the smaller pieces of lump are letting through. to correct the issue i've had to run the follwing setup (see picture) that blows air through the botttom vent and feeds the fire with o2 to really get it going. I've cleaned out my fire box an still have the same issue. i think i would have to to leave the fan on indefintly during a sear session to get a good sear. didnt have this issue when i was able to use the bigger size lumps of lump.
I use the bge type of fire startters which have alwayd worked well in the past , but i m thinking i may have to switch to a torch to really get all these little pieces going. i was surprised to see how many eggers actuall use a torch vs. all the other metheods to start. , so ther must be something to it. how long does it take to really get things going with a torch. does anyone have a specifice torch recommendations that have worked out well?
thanx
Greygoose.
Comments
-
I use a small plumbers torch on a LP cylinder, others use MAPP but it is more expensive.
Only takes a minute to get it going.
Never eat anything passed through a window unless you're a seagull ... BGE Lg. -
Bigger pieces on the bottom are better, because it allows more air flow. If you want to save some money, buy the BGE lump and use the bigger pieces for the bottom layer and the royal oak to finish the fill. MAPP gas is more expensive, but it burns hotter. It is used basically for soldering copper pipe and fittings.Felton, Ca. 2-LBGE, 1-Small, PBC, PK360, Genesis Summit, Camp Chef Flattop, Smokefire 24, Traeger Pro Series 22 Pellet with a Smoke Daddy insert, Gateway 55 Gal. drum, SNS Kettle w/acc.
-
BGE lump is made by Royal Oak. Sizes of pieces varies from bag to bag. I use Royal Oak for my standard charcoal and it has always worked very well even with small pieces.
The most common cause for a slow starting fire is poor air circulation and I solve that by using a wiggle rod to open up the holes in the firegrate. You can make your own or buy one from:
http://thirdeyebbq.com/WiggleRods.aspx
I think starting with a torch is overkill. I start my charcoal using 91% alcohol purchased at Walmart. I use a pencil to poke a tiny hole in the seal and then squirt a little alcohol in 4 places in a circle about 4 inches in from the outside rim of the charcoal. Then a little squirt in the center. Wait a few seconds then toss in a match.
Alcohol burns clean and quickly starts the charcoal. It is very safe as long as you stand back a little when dropping in the match. The warmer the day, the more it evaporates before lighting and can cause a flash. In the winter, it doesn't evaporate and I actually have to hold the match at the squirt points.
Large BGE
Barry, Lancaster, PA -
I love the small white Weber starter cubes, some where around 3.00 for 24 of them and they work well.
-
It makes no difference how you light the lump, it's all about air flow (in the lower vent and out the top). If the holes in your charcoal grate are clogged, you'll have trouble getting temps up.Packerland, Wisconsin
-
Size does matter and can vary from bag to bag with any brand.
Make your own lump and you can control the size much better Just throw away the small stuff.
I grill therefore I am.....not hungy. -
I dump bags of lump into a plastic bin. The really small stuff falls to the bottom, and every 50 pounds or so, I have a bunch of charcoal that I can toss into my garden. Its not worth much in the Egg unless its mixed with enough big pieces to allow a strong air flow. My limit is anything small enough to jam the bottom grate.
FWIW, the bag of Cowboy I opened yesterday had chunks the size of a melon in it. I was happy.
I use a weedburner to start my lump. The one I have is a Bernzomatic that looks sort of like a walking cane. It can use either propane or MAPP. The MAPP is noticeably faster getting the lump going. While its always fun to light the thing, and enjoy the fireworks, the main reason I use it is get a fire going even in a thunderstorm. My back up is cooking oil on a paper towel.
-
BGE lump is made by Royal Oak. Sizes of pieces varies from bag to bag. I use Royal Oak for my standard charcoal and it has always worked very well even with small pieces.
The most common cause for a slow starting fire is poor air circulation and I solve that by using a wiggle rod to open up the holes in the firegrate. You can make your own or buy one from:
http://thirdeyebbq.com/WiggleRods.aspx
I think starting with a torch is overkill. I start my charcoal using 91% alcohol purchased at Walmart. I use a pencil to poke a tiny hole in the seal and then squirt a little alcohol in 4 places in a circle about 4 inches in from the outside rim of the charcoal. Then a little squirt in the center. Wait a few seconds then toss in a match.
Alcohol burns clean and quickly starts the charcoal. It is very safe as long as you stand back a little when dropping in the match. The warmer the day, the more it evaporates before lighting and can cause a flash. In the winter, it doesn't evaporate and I actually have to hold the match at the squirt points.
I disagree ... the torch is simple, fast and safer than playing with alcohol and matches, especially on a breezy day!Never eat anything passed through a window unless you're a seagull ... BGE Lg. -
I dump bags of lump into a plastic bin. The really small stuff falls to the bottom, and every 50 pounds or so, I have a bunch of charcoal that I can toss into my garden. Its not worth much in the Egg unless its mixed with enough big pieces to allow a strong air flow. My limit is anything small enough to jam the bottom grate.
I use all the charcoal - small and large pieces. Here is a post from Grandpa Grub that shows what he did with small pieces:
http://www.greeneggers.com/index.php?option=com_simpleboard&Itemid=112&func=view&catid=1&id=1173701#1173701
Large BGE
Barry, Lancaster, PA -
I tried Royal Oak for the first time over the weekend. I completely cleaned out my Egg, and dumped in the RO straight out of the bag. I stirred it up a bit, dug a little hole, tossed in a burning fire starter, and away it went. I had 800 degrees in no time flat (in fact, I'd never seen the thermometer race up to 800 that fast before), and I was able to bring it back down to 400 pretty easily.I like the Royal Oak, and will likely carry it in my store.Egg Head in Klamath Falls, Oregon
-
If you don't want to use a fan, I use a hair dryer, get it hot and away it goes... I accidently close my petal too much this evening and almost put it out.. (it had not yet reached temp), so I grabbed the HD and got it back up pretty quickly..Alton Brown made a tuna cooker with a Weber Chimney and a hair dryer. Seared it in < 2 minutes. Dont recall the temps... "http://www.foodnetwork.com/recipes/alton-brown/chimney-tuna-loin-recipe/index.html"
Categories
- All Categories
- 182.8K EggHead Forum
- 15.7K Forum List
- 459 EGGtoberfest
- 1.9K Forum Feedback
- 10.3K Off Topic
- 2.2K EGG Table Forum
- 1 Rules & Disclaimer
- 9K Cookbook
- 12 Valentines Day
- 91 Holiday Recipes
- 223 Appetizers
- 516 Baking
- 2.4K Beef
- 88 Desserts
- 165 Lamb
- 2.4K Pork
- 1.5K Poultry
- 30 Salads and Dressings
- 320 Sauces, Rubs, Marinades
- 543 Seafood
- 175 Sides
- 121 Soups, Stews, Chilis
- 36 Vegetarian
- 100 Vegetables
- 313 Health
- 293 Weight Loss Forum