Wood Egg Nest for the XL

Unknown · July 2009

Hi all, I've had my XL for a few years. After moving it to a few contest the metal nest middle bar is bent and the 4 legs with wheels do not stay locked (or screwed) into position.
Has anyone made a nest or cart for an XL with a flip up table? If so, can you post a picture for ideas?

Thank you all.

Mainegg · July 2009

Have you checked out the tables on the Wiz's site? not sure if there is any XL's there but lots of good ideas to start out with..
http://www.nakedwhiz.com/TableGallery/tables.htm

FlaPoolman · July 2009

BobbyQ has a custom built nest for his competition XL. I believe sparky posted the pics of it.

Unknown · July 2009

This was a $20.00 used table that we cut to fit the XL.
We bolted some angle iron below and used the cut out from the top to make the shelf the XL is resting on.
We pounded the BGE side table mount flat and mounted to the side of the table.
Very cheap table that works perfect.
The bottom plastic pan ( water heater tray ) holds the grates and such.
Rolls great and is still very compact for storage.
darian

Wood Egg Nest for the XL

Comments

Categories