Welcome to the EGGhead Forum - a great place to visit and packed with tips and EGGspert advice! You can also join the conversation and get more information and amazing kamado recipes by following Big Green Egg to Experience our World of Flavor™ at:
Facebook  |  Twitter  |  Instagram  |  Pinterest  |  Youtube  |  Vimeo
Share your photos by tagging us and using the hashtag #BigGreenEgg.

Want to see how the EGG is made? Click to Watch

Problems with Blackened Tilapia

emmagee
emmagee Posts: 48
edited November -0001 in EggHead Forum
I tried blackening some fish tonight for the first time, I used Tilapia and followed the directions both on the forum and in Chef Paul's Louisiana Kitchen. It wasn't bad, but it wasn't great either, I know blackening is basically burning, but the fish turned out too burned. I had my skillet gray in color and water beads would dance on it, dome temp was about 525 and I cooked the Tilapia 2 mins per side.

I am guessing I maybe cooked to too long per side, may 1.5 mins would be more appropriate? I know CHef Paul says your skillet can't be too hot for this, so I'm guessing that wasn't my problem. If not too long per side any other ideas what I should change next time?

Thanks for any tips/advice!
· Share on FacebookShare on Twitter

Comments

  • Panhandle Smoker
    Panhandle Smoker Posts: 3,018
    Yep 60-90 seconds a side should do it and with dome open. You want a tad of oil or butter in the pan almost hot enough to combust when you put the fish in. Here is a good tutorial.

    http://www.youtube.com/watch?v=rCrj0Mqu66M
    · Share on FacebookShare on Twitter
  • emmagee
    emmagee Posts: 48
    Thanks Panhandle! I put a bit of butter in the skillet before putting the filets in, and it definitely combusted! I had watched the video yesterday and thought I followed it pretty closely, but guess I just went too long per side. I also through four scallops in the pan and they were great!
    · Share on FacebookShare on Twitter
  • Panhandle Smoker
    Panhandle Smoker Posts: 3,018
    It shouldnt taste burnt. It is mostly the season that turns black. If it smokes like crazy when you put the fish in you are doing it right.
    · Share on FacebookShare on Twitter
  • Panhandle Smoker
    Panhandle Smoker Posts: 3,018
    When you have the CI that hot it doesn't take long to be a disaster. Practice makes perfect. My first year in Louisiana 22 years ago, I had always heard about Blackened Red fish. Thought I would try it. What I didn't hear was don't do it inside. :huh: :cheer: :cheer: :cheer:
    · Share on FacebookShare on Twitter
  • Panhandle Smoker
    Panhandle Smoker Posts: 3,018
    One more thing the thinner the filet the less time it takes. 60-90 seconds is for Red fish. Talapia is usually a much thinner filet.
    · Share on FacebookShare on Twitter
  • Car Wash Mike
    Car Wash Mike Posts: 11,244
    Like I said in my post below. I don't subscribe to hotter the better for blackening. I used the spider, dome temp was 400. Sprayed it with Pam. I also, like my butter to set up before cooking.

    Mike
    · Share on FacebookShare on Twitter
  • Mike in Abita
    Mike in Abita Posts: 3,302
    When it comes to blackenning the trick is in the timing. If the filets are a 1/2" thick then no longer than 45 seconds a side. 3/4 to 1" then 90 secs a side. Any thicker, then I just grill it.
    · Share on FacebookShare on Twitter
  • DrZaius
    DrZaius Posts: 1,481
    emmagee wrote:
    I know blackening is basically burning, but the fish turned out too burned.

    Blackening is not burning of the meat whether it is beef or pork or fish. It is however the burning of the seasoning that your meat is coated with. Some peeps that I know thought the same and burned the hell out of their food and they hated it. Coat you meat well with your seasonings of choice THEN blacken.
    This is the greatest signature EVAR!
    · Share on FacebookShare on Twitter
  • JohnB
    JohnB Posts: 183
    I "blacken" my fish directly on the grill, no skillet, so I guess it isn't really blackened. I get the dome up to 650 and do about 60-90 seconds a side using the blackened seasoning recipe from the Joy of Cooking, which has some crazy rub recipes, by the way.
    · Share on FacebookShare on Twitter
  • emmagee
    emmagee Posts: 48
    Mike in Abita wrote:
    When it comes to blackenning the trick is in the timing. If the filets are a 1/2" thick then no longer than 45 seconds a side. 3/4 to 1" then 90 secs a side. Any thicker, then I just grill it.

    Good to know, these were 1/2" or so, so I went way to long ant 2 min/side. Thanks for the info!
    · Share on FacebookShare on Twitter
  • Misippi Egger
    Misippi Egger Posts: 5,095
    My first try at blackening fish was a thick cut of tilapia. I asked the fish monger for whatever he had that was an inch thick. I watched the video of Frank and I believe he mentions the filets are 3/4 -1 inch thick. As I watched him cook, I watched the timer on the video playback and it appeared to me that he cooked it about 1 min 15 sec per side. SOoo that is what I did. He also used a dry skillet for the reasons I stated in an earlier post.

    Since then I have cooked blackened redfish twice. The redfish was thick and I turned after 75 seconds. At the end of the second 75 sec. I pushed into the thickest part and it was not done, so I flipped it again and left another 30-45 sec. All three cooks turned out perfect !

    1/2 thin filets would definitely cook much faster at that temp. From this little bit of experience, I think tilapia seems to be less dense than redfish and therefore cooks a little faster.
    · Share on FacebookShare on Twitter
  • Hoss
    Hoss Posts: 14,600
    I cooked blackened Tilapia last week.One of my best cooks yet.I olive oiled the fillets.seasonded heavily.Put a cast iron skillet on the LGE pre-heated to 500.Dropped in a pat-1T butter then the fillets.45-60 seconds MAX.OMG it was GOOOO-OOOD!!! B)
    · Share on FacebookShare on Twitter

Categories