Skip to content
  • Register
    • Welcome to the EGGhead Forum - a great place to visit and packed with tips and EGGspert advice! You can also join the conversation and get more information and amazing kamado recipes by following Big Green Egg to Experience our World of Flavor™ at:
    Facebook  |  Twitter  |  Instagram  |  Pinterest  |  Youtube  |  Vimeo
    Share your photos by tagging us and using the hashtag #BigGreenEgg.

    Want to see how the EGG is made? Click to Watch

    Granite counter help

    Posts: 252
    in Off Topic
    Hi -  We just bought a house, granite counters are 15-20 years old.  Around the base of the faucet, there are a few of these defects.  It's like something ate away an individual crystal out of the granite.  I'm wondering if they are a problem, and if I should do something to them.  Thanks.
    · Share on FacebookShare on Twitter

    Welcome!

    It looks like you're new here. Sign in or register to get started.
    Sign In
    Register

    Comments

    • Posts: 18,484
      I would assume those could be filled in with an epoxy. 
      · Share on FacebookShare on Twitter
    • Posts: 4,858
      I don't see really well but it can probably be filled with epoxy.  

      ____________________
      Entrepreneurs are simply those who understand that there is little difference between obstacle and opportunity and are able to turn both to their advantage. •Niccolo Machiavelli
      · Share on FacebookShare on Twitter
    • Posts: 18,459
      Paging @Mattman3969
      · Share on FacebookShare on Twitter
    • Posts: 10,458
      Easiest thing to do is get yourself some thin superglue. Lightly fill the area and let it cure.  Any glue that is above the surface can easily be shaved (not cut) down with a razor blade. All be good after this.  

      -----------------------------------------

      analyze adapt overcome

      2008 -Large BGE. 2013- Small BGE and 2015 - Mini. Henderson, Ky.
      · Share on FacebookShare on Twitter
    • Posts: 252
      Mattman3969 said:
      Easiest thing to do is get yourself some thin superglue. Lightly fill the area and let it cure.  Any glue that is above the surface can easily be shaved (not cut) down with a razor blade. All be good after this.  
      Thanks very much for the help.  Sorry to act so helpless, but I'm thinking I would clean them a little with some keyboard can spray, try to wipe them out, and put the glue in when there is just a slightly damp surface - because I thought those glues cure with water?
      · Share on FacebookShare on Twitter
    • Posts: 133
      Have you ever resealed them?
      XL BGE
      · Share on FacebookShare on Twitter
    • Posts: 133
      Sorry, just read you got the house. I would buy some granite sealer (it is cheap), put a dab on a paper towel and see if it makes the spot less noticeable. You could probably fill in with clear epoxy, or try the superglue recommendation if it really bothers you.
      XL BGE
      · Share on FacebookShare on Twitter
    • Posts: 148
      Fill or just seal. Granite is forever. Congrats on the house.
      · Share on FacebookShare on Twitter
    • Posts: 104
      Don't you think it might be prudent to ask a granite counter top specialist before trying to repair it with something you may later regret?
      Morro Bay, CA
      · Share on FacebookShare on Twitter
    • Posts: 18,459
      morrobayrich said:
      Don't you think it might be prudent to ask a granite counter top specialist before trying to repair it with something you may later regret?
      That's why I paged @Mattman3969 it's what he does. 
      · Share on FacebookShare on Twitter
    • Posts: 10,458
      edited February 2017
      Vetereggnarian said:
      show previous quotes
      Thanks very much for the help.  Sorry to act so helpless, but I'm thinking I would clean them a little with some keyboard can spray, try to wipe them out, and put the glue in when there is just a slightly damp surface - because I thought those glues cure with water?
      Easiest way to do it (and the way I do it) is if the first glue don't stick just consider it the clean out test.  The next one will still because you've pulled all the contaminants out with the first attempt. Don't do the water.  I've seen adverse effects when applied to moist surfaces.   If you have questions hit me up via pm and I'll give you my digits.  

      -----------------------------------------

      analyze adapt overcome

      2008 -Large BGE. 2013- Small BGE and 2015 - Mini. Henderson, Ky.
      · Share on FacebookShare on Twitter

    Welcome!

    It looks like you're new here. Sign in or register to get started.
    Sign In
    Register

    Welcome!

    It looks like you're new here. Sign in or register to get started.
    Sign In
    Register

    Quick Links

    Categories