Flame Boss Waterproofing?

Star_TrEGG · December 2016

With winter coming, I'd like to waterproof my Flame Boss 200 temperature controller. I know Eggheads have used plastic bags or clear plastic storage bins to protect their controllers. Any FB owners want to share with me how you do it?

Carolina Q · December 2016

I have a Guru. I put all the parts in an old cake pan to keep water off the bottom. Then I put a cake carrier dome thingie over that to keep the rain off. I set it at the edge of a work table so the wires and cords can hang over the edge. I guess if the wind kicks up, I'll have to put something heavy on top.

Some guys have fancy waterproof cases that they drill holes in so they can add PVC elbows for the wires. They care more than I do.

Image: https://us.v-cdn.net/5017260/uploads/editor/nw/nphm92jcq96q.jpg

Star_TrEGG · December 2016

Carolina Q said:

I have a Guru. I put all the parts in an old cake pan to keep water off the bottom. Then I put a cake carrier dome thingie over that to keep the rain off. I set it at the edge of a work table so the wires and cords can hang over the edge. I guess if the wind kicks up, I'll have to put something heavy on top.

Some guys have fancy waterproof cases that they drill holes in so they can add PVC elbows for the wires. They care more than I do.

Nice and simple.

caliking · December 2016

Well worth the little effort it takes to make a box for it. Doubles as storage for the controller, fan, and probes when not in use.

Star_TrEGG · December 2016

caliking said:

Well worth the little effort it takes to make a box for it. Doubles as storage for the controller, fan, and probes when not in use.

@caliking Doesn't seem too difficult. Did you cut a 2" hole? What did you use to fix the elbow pipe in place?

Big_Green_Craig · December 2016

Just zip it up in a Zip Loc bag.

caliking · December 2016

Star_TrEGG said:
@caliking Doesn't seem too difficult. Did you cut a 2" hole? What did you use to fix the elbow pipe in place?

The elbows were some kind of plumbing part for sinks, so it came with a ring/nut/flange type of thing. I think it was a 2" hole that I had to cut. Threaded the elbow through the hole and tightened the ring onto it. Easy peasy.

Lvnthedrm · December 2016

I ended up going with one of these. Didn't need it to be clear since I just use my phone to monitor the cook. Has worked well so far. Picked it for like $20 on amazon.

Star_TrEGG · December 2016

Lvnthedrm said:

I ended up going with one of these. Didn't need it to be clear since I just use my phone to monitor the cook. Has worked well so far. Picked it for like $20 on amazon.

@Lvnthedrm What a great idea! I've never seen this. The link showed the 330 (large) version. I understand there's a 285 (medium) version. Do you think the medium Sockit would work with the Flame Boss with outlets & wires?

BilZol · December 2016

I gotta do better then this...

BilZol · December 2016

Sockit box ordered. Great idea. In green of course....
Now I'm going to figure out how to insulate and heat it, also need to protect the blowers, any good ideas?

Lvnthedrm · December 2016

Star_TrEGG said:

Lvnthedrm said:

I ended up going with one of these. Didn't need it to be clear since I just use my phone to monitor the cook. Has worked well so far. Picked it for like $20 on amazon.

@Lvnthedrm What a great idea! I've never seen this. The link showed the 330 (large) version. I understand there's a 285 (medium) version. Do you think the medium Sockit would work with the Flame Boss with outlets & wires?

I did get the large. Haven't seen the medium in person but I think it would be plenty large enough for just the flameboss and its accessories. My thought process for the large was to have the potential to put other things in there such as a small surge protector power strip, my bic lighters, etc
Also, @BilZol makes a valid point above about insulation and heating...you may want the extra room for such things.

Star_TrEGG · December 2016

Lvnthedrm said:

Star_TrEGG said:

Lvnthedrm said:

I ended up going with one of these. Didn't need it to be clear since I just use my phone to monitor the cook. Has worked well so far. Picked it for like $20 on amazon.

@Lvnthedrm What a great idea! I've never seen this. The link showed the 330 (large) version. I understand there's a 285 (medium) version. Do you think the medium Sockit would work with the Flame Boss with outlets & wires?

I did get the large. Haven't seen the medium in person but I think it would be plenty large enough for just the flameboss and its accessories. My thought process for the large was to have the potential to put other things in there such as a small surge protector power strip, my bic lighters, etc
Also, @BilZol makes a valid point above about insulation and heating...you may want the extra room for such things.

@Lvnthedrm Great points! I think I'll order the 330 (large) version...of course in green.

Star_TrEGG · December 2016

@Lvnthedrm @BilZol I also ordered the large version and should receive it tomorrow. I just love Amazon's quick delivery! @Nature Boy This product may be a good item to add to your store to waterproof temperature controllers like the Flame Boss.

Image: https://us.v-cdn.net/5017260/uploads/editor/0o/62gy56bjmbg7.jpg

Star_TrEGG · December 2016

BilZol said:

I gotta do better then this...

@BilZol I used to live in Colorado Springs so I know how bad snow storms can be and its impact on our cooks. Glad you got a more permanent solution. We will see how the SOCKitBOX works this winter. As you pointed out, I've got to think through the heating and insulation, too.

Focker · December 2016

Would love to go wireless with a Harbor Freight battery charger. This would require a bigger box. But the PVC elbows, and maybe some Silicone II, may be the ticket. Another winter putz project added to the list. Thanks guys.

stlcharcoal · December 2016

I just put an inverted Pyrex clear 9x9 baking dish over the top.

HeavyG · December 2016

stlcharcoal said:

I just put an inverted Pyrex clear 9x9 baking dish over the top.

Exactly! No need to overthink this.:)

Focker · December 2016

stlcharcoal said:

I just put an inverted Pyrex clear 9x9 baking dish over the top.

So you don't run the jumper, and put a dish over the FB?

I know the battery is sealed, but wonder how it will hold up with 10" of wet snow sticking to it, and melting around it, like yesterday?

Curious, where you located @HeavyG?

A closed box, containing both FB and jumper connected, with one elbow for pit probe and blower, may be my best option sans roof here in IL.

HeavyG · December 2016

Focker said:

stlcharcoal said:

I just put an inverted Pyrex clear 9x9 baking dish over the top.

So you don't run the jumper, and put a dish over the FB?

I know the battery is sealed, but wonder how it will hold up with 10" of wet snow sticking to it, and melting around it, like yesterday?

Curious, where you located @HeavyG?

A closed box, containing both FB and jumper connected, with one elbow for pit probe and blower, may be my best option sans roof here in IL.

I'm in eastern Virginia a couple miles from the ocean. Snow isn't a frequent thing I have to deal with. Nor do I have a FlameBoss.

What I have been using for my wired thermos for awhile is one of those clear plastic clamshell containers that I buy my organic salad greens in. Works fine. A big wind did blow it off my table once which left it dangling and caused the probe to fail and I had to buy a new probe. Now I make sure to put a brick on it.

I did just get my FireBoard WiFi thermometer last week and I plan on using it a lot so I may come up with something a little more elaborate than a pyrex bowl or lettuce clamshell and brick.

NPHuskerFL · December 2016

BilZol · December 2016

Star_TrEGG said:

BilZol said:

I gotta do better then this...

@BilZol I used to live in Colorado Springs so I know how bad snow storms can be and its impact on our cooks. Glad you got a more permanent solution. We will see how the SOCKitBOX works this winter. As you pointed out, I've got to think through the heating and insulation, too.

Lemme know if you come up with something. I'm thinking maybe a light in it.

Star_TrEGG · December 2016

BilZol said:

Star_TrEGG said:

BilZol said:

I gotta do better then this...

@BilZol I used to live in Colorado Springs so I know how bad snow storms can be and its impact on our cooks. Glad you got a more permanent solution. We will see how the SOCKitBOX works this winter. As you pointed out, I've got to think through the heating and insulation, too.

Lemme know if you come up with something. I'm thinking maybe a light in it.

@BilZol I looked through reviews of the SOCKitBOX and the box appeared to do well in rainy and snowy conditions even without any insulation or heat.

Carolina Q · December 2016

Image: http://theocddiaries.com/wp-content/uploads/2011/01/tumblr_m5ru7stlIu1rn1mk3o1_500.jpg

SaintJohnsEgger · December 2016

I have the Flameboss 200 plus the battery pack that they sell. I plan to just get a small box from Walmart to put it in and add a small elbow. I'll try to get a clear box so that I can read the display as I had a problem with my phone updating during my thanksgiving cook with a socket timeout. I figure being Thanksgiving the site may have been swamped with people monitoring their cooks.

The SockIt box looks good but I would want a clear one.

Flame Boss Waterproofing?

Comments

Categories