XL Table nest-

Tspud1 · October 2016

Does anyone have the dimensions of the XL table nest? It's not on mfg web site and local dealer doesn't stock that item.

kl8ton · October 2016

Are you looking for this:
http://www.biggreenegg.com/wp-content/uploads/2011/11/BGE-TP-XL.pdf

Tspud1 · October 2016

No this

kl8ton · October 2016

They should be able to get it for you. Part number is NESTABXL

Image: https://us.v-cdn.net/5017260/uploads/editor/4p/yd0n85hp89nn.jpg

http://www.biggreenegg.com/wp-content/uploads/2011/09/BGE_V5PUB_Catalog_issuu.pdf

kl8ton · October 2016

I, however, can't help you with dimensions. Maybe an XL user can measure theirs and report back.

PSC · October 2016

Do you need a specific dimension or measurement?

I use one for my XL and would be happy to help you

Tspud1 · October 2016

kl8ton said:

They should be able to get it for you. Part number is NESTABXL

http://www.biggreenegg.com/wp-content/uploads/2011/09/BGE_V5PUB_Catalog_issuu.pdf

Sent them a message thru their web site no response yet.

Tspud1 · October 2016

PSC said:

Do you need a specific dimension or measurement?

I use one for my XL and would be happy to help you

I need the distance from front left foot to front right foot and then from front left to back left. I have to set this on top of something I am building and can't build until I know measurement.

BilZol · October 2016

Center to center 18". Spaced equally all the way around.

Tspud1 · October 2016

BilZol said:

Center to center 18". Spaced equally all the way around.

Thanks, is this picture of a XL?

BilZol · October 2016

Tspud1 said:

BilZol said:

Center to center 18". Spaced equally all the way around.

Thanks, is this picture of a XL?

Yes, it is. I spaced my supports under the legs so I wouldn't have to worry about the weight.

Tspud1 · October 2016

BilZol said:

Tspud1 said:

BilZol said:

Center to center 18". Spaced equally all the way around.

Thanks, is this picture of a XL?

Yes, it is. I spaced my supports under the legs so I wouldn't have to worry about the weight.

Just got this from customer service, kind of makes things unclear:
Hello,

The XL table nest has a 24" x 24" footprint. The bottom of the base is narrower than the top.

Regards,

I guess if I make it 26" or 28" it will have no chance of sliding off.

BilZol · October 2016

Tspud1 said:

BilZol said:

Tspud1 said:

BilZol said:

Center to center 18". Spaced equally all the way around.

Thanks, is this picture of a XL?

Yes, it is. I spaced my supports under the legs so I wouldn't have to worry about the weight.

Just got this from customer service, kind of makes things unclear:
Hello,

The XL table nest has a 24" x 24" footprint. The bottom of the base is narrower than the top.

Regards,

I guess if I make it 26" or 28" it will have no chance of sliding off.

Well, there's the measurement you asked for, tape measure and all. If you have an XL you can measure the overall dimensions for the space you need. If you want to run independent supports under your surface for the feet 18" is your number.

PSC · October 2016

correct, 18"

maybe the footprint they told you about is from front left to back right
remember that in a square the "cross" measurements are about 40% larger than side to side

I made a 30" base for the egg to be in, all the 30" base is supported

Tspud1 · October 2016

PSC said:

correct, 18"

maybe the footprint they told you about is from front left to back right
remember that in a square the "cross" measurements are about 40% larger than side to side

I made a 30" base for the egg to be in, all the 30" base is supported

They corrected the measurement to what you gave me after I explained exactly
what I was needing it for. I do not have a XL egg. I am going to use the 18" to make supports under the platform that the nest is going to sit on. Thanks again

XL Table nest-

Comments

Categories