small burn out, but big on temperature

That's great but I wouldn't recommend doing high heat cleanings. Last time you argued high heat burns are fine the next day someone posted about their cracked base they got from a high heat clean. I have personally been standing next to an egg that the base and fire ring cracked in the same cleaning. There is no reason ever to do this.

How is it a stretch Ron if I remember correctly it was like a 10yr old egg also. That's on you for giving bad info Ron. After my 3rd cracked base I learned.

GaBGE said:

That's what the high priced warranty is for. If it cracks, get a new one!

It's kind of a pain to take the egg apart and go get a new base and try to put it back together. I say try because the bent bolts don't always work again and I bent the band on my large one time cranking it down and the base and dome never lined up correctly again. It cost me $100 for a new large band. You can get your egg to 500 and let it sit longer and it burns everything off so your egg is burning clean there is no reason at all to push it to 800 degrees unless you want to crack your egg. Ron has seen the numerous people that have posted that they cracked their eggs but for some reason he posts that it's a good idea just because it hasn't happened to him. What Ron did is stupid and not needed at all.

RRP said:

Lit said:

RRP said:

1, 2, 3 of them huh? 

ah, never mind - you won't catch on to my point. Good night, Lit.

You have no point Ron another stupid post. Maybe next you can tell us about your Comcast experience.

LOL! You know, if you would have said that because of me you lost 3 domes due to my inferno burn offs I might have listened and changed my ways and never suggested what works for me. BUT you are claiming that due to me you lost 3 bases which are actually insulated by the fire box and the fire ring, but your 3 domes were fine? You just don't get it do you? Oh well, like I care any more.

Guessing you don't have an IR thermometer Ron. Guess what? The base gets way hotter than the dome since there is glowing hot lump in it genius. Also I never said my bases cracked because of you just people posting stupid advice. You know many people have had their eggs and other parts crack from doing hot clean burns but you still post it likes it's a good idea. See how that's stupid? Or are just just an ass Ron?

RRP said:

Yes, I have a IR gun and actually a good one. I'm sorry I didn't use it to record any temps today. BUT is there anyway in your mind that you MIGHT be able to accept the fact that my original picture showed my Tel-Tru thermometer was reading over 800 degrees? Won't you even "sort of" "kinda" think that maybe that dome was very hot? And it did not crack. But the fire box and fire ring protecting the base "sort of" "kinda" protected the base? And the base did NOT crack! Can you follow any of that? 

Ah sh*t - arguing with you is pointless.  

No Ron you have no argument. Your dome ceramic temp was probably around 500-550. You base ceramic temp was probably around 800. That's a big difference Ron. The fire box and fire ring have 1200 plus degree lump sitting in them so they are probably about 1200 degrees not sure how that is an insulator. You dome has a foot plus of air space insulating it and keeping it cooler. My whole point Ron is you have seen the countless posts where people cracked parts in their egg doing high heat clean burns and just because it hasn't happened to you you make posts on here like its a good idea to do. I shouldn't even have to argue with you there are hard facts based on the numerous posts and for some reason you still can't comprehend it. If it was the only way to get the egg to burn clean then great but its not. The high heat cleans is how you crack eggs, people fry their factory gaskets, and they melt their eggs shut so as long as everyone ignores those 3 things yes Ron you are very smart everyone else that has cracked ceramics during clean burns are just wrong and as usual you are right Ron.

fishlessman said:

wow, all this argument about 800 degrees in an egg, i consider that a cooking temp for searing a steak not a burnout temp. people routinely cook pizzas at that temp. one of my bases cracked during a turkey cook so maybe we shouldnt recommend cooking over 325. for what its worth ive done 1200 degree dome temp pizzas and bge's response was they tested the eggs by bringing them to 1200 and dumping water directly in them at that temp

Cracking it while cooking is one thing pointlessly doing it is another. Also with steaks I don't usually let it sit at 800 for an hour so the ceramics never get close to the same temp as they do in a clean burn. People can do what they want but a long time poster making a post like its a good idea when numerous people have said they cracked egg parts doing it seems like a pretty **** thing to do to me.

fishlessman said:

interesting your ok with 1200 degree pizza cooks but 800 degrees is out

I don't do 1200 degree pizza cooks I cook my pizzas 500-550. But if you crack it cooking then fine that what it's for. If you crack it doing something stupid that someone on the forum recommends that's different.