Share your photos by tagging us and using the hashtag #BigGreenEgg.
Want to see how the EGG is made? Click to Watch
Egg repair parts?
).Naturally, I'll have to remove the band to replace it, so I'll need to replace those larger bolts as well.
Can I get these things at Home Depot?
Can anyone tell me exactly what I should look for
Comments
-
it's called a clinch bolt. Your dealer should have one or any GOOD hardware store - but not a big box joint - a ma & pa store will have them!Re-gasketing the USA one yard at a time!
-
The dealer said he doesn't carry any parts like that. Not much of a dealer huh?
-
that's correct! too bad - too sadRe-gasketing the USA one yard at a time!
-
I would try another dealer or call BGE. If all else fails, you can order them here...
http://www.mcmaster.com/#self-clinching-studs/=cxmj2kI hate it when I go to the kitchen for food and all I find are ingredients!
MichaelCentral Connecticut -
Since one of the "features" of the band attaching carriage bolts is the way they bend when you tighten them enough, is there any particular kind I should look for. They appear to be ordinary galvanized steel.
-
Grade 5
http://www.eggheadforum.com/index.php?option=com_simpleboard&Itemid=55&func=view&catid=1&id=1064948I hate it when I go to the kitchen for food and all I find are ingredients!
MichaelCentral Connecticut -
Thanks, Michael. I seem to recall being left back in 4th Grade, so I have some more learning to do!
:laugh: -
You don't torque down the clinch bolts holding the handle on...it's the bolts that bring the bands up tight that need to be tightened until bending.Re-gasketing the USA one yard at a time!
-
Also, re Grade 5, I just went by the markings on the bolt head. Asked Bruce B to confirm and he didn't know. Pretty standard markings though.
I hate it when I go to the kitchen for food and all I find are ingredients!
MichaelCentral Connecticut -
Found the bolt for the band easy enough, but no luck at local stores for the clinch bolt. I'll try other Egg dealers tomorrow. Thanks for the help, folks.
-
use this site to see if you have a Fastenal store near you - they normally are in out of the way locations as their clientele is more toward industry, but they sell retail. BTW if Fastenal doesn't have it you don't need it!
http://www.fastenal.com/web/locations.ex;jsessionid=dDz2TJCNxPqJsTyLhVnqGthNhpSGLTqjchxSFvyNTpr40cH7QGc2!-2075832399!399226309Re-gasketing the USA one yard at a time! -
If you can't find it locally,email me through the forum,and I'll mail one to ya
I have a few extras here.
-
Thanks! Looks like there's one less than 5 miles from my house. I'll make a visit in the morning.
-
thanks, ron!! I'd never heard of them, but it appears I have a store about 10 miles away. Hope I can remember this when I next need an oddball part!! hahaha
I hate it when I go to the kitchen for food and all I find are ingredients!
MichaelCentral Connecticut -
Thanks, Sparky. Email sent.
No luck with three Egg dealers, two really good hardware stores, Home Depot, and a Fastenal store. I'm starting to think BGE is the only user of those clinch bolts! -
I'm dumbfounded that Fastenal didn't have them, but I knew HD was a waste of time. Those really are not uncommon bolts!Re-gasketing the USA one yard at a time!
-
Fastenal does carry them!
They call them "self clinching studs":
http://www.fastenal.com/web/search/products/self-clinching-studs/_/N-gj4ztb&in_dim_search=1Re-gasketing the USA one yard at a time! -
The fastenal store near me must be a loser. I brought in my remaining one to show them, and both guys in the store just said they had never seen anything like it.
-
I agree! I swear the guys here would have made you one - they are that helpful! I recall you have 4 Fastenal stores in Cin - maybe a call to another would work since I gave you the part numbers.Re-gasketing the USA one yard at a time!
-
We'll find out tomorrow.
When I went to the nearest Fastenal store, they just looked at the bolt, said they had never seen anything like it, and they definitely didn't carry it. No interest in even researching it.
After looking at your last note, I called the next closest store, and the guy was happy to help. He promised me he would have some on hand in the morning. What a difference! -
That's more like it! Glad I kinda egged you on! :laugh:Re-gasketing the USA one yard at a time!
-
Success. Picked up the bolts at the second store this morning. They're actually slightly longer than the ones that came with the Egg, but a couple of washers solved that problem nicely.
:P -
Great! All's well that ends well!Re-gasketing the USA one yard at a time!
-
Same thing happened to me but on the spring. That's what I get for not using torque wrench! I hope I can find one tomorrow or my plans for dinner Saturday night might have to change.
-
I called bge and they sent me an entire hardware bag, no questions asked and for free. Going to give the extras to my dealer for the next guy.
Categories
- All Categories
- 183.4K EggHead Forum
- 15.8K Forum List
- 459 EGGtoberfest
- 1.9K Forum Feedback
- 10.4K Off Topic
- 2.2K EGG Table Forum
- 1 Rules & Disclaimer
- 9K Cookbook
- 12 Valentines Day
- 91 Holiday Recipes
- 224 Appetizers
- 520 Baking
- 2.5K Beef
- 88 Desserts
- 162 Lamb
- 2.4K Pork
- 1.5K Poultry
- 30 Salads and Dressings
- 320 Sauces, Rubs, Marinades
- 547 Seafood
- 174 Sides
- 121 Soups, Stews, Chilis
- 40 Vegetarian
- 100 Vegetables
- 315 Health
- 293 Weight Loss Forum