Small Transporter rig

Wasted Words · March 2008

Awhile back someone (WessB, TNW...not sure) posted some pics of a rig they had constructed to transport a SBGE. I've looked over several sites but can't seem to locate the information. Does anyone know where the key is to unlock this information? :blink:

egret · March 2008

Here ya' go :

mikeb6109 · March 2008

ping ssn686... if i remember her was one that posted a nice rig to transport the egg with compartements for the ring and fire box!! that way there was less movement.

Scubadog · March 2008

You can also bring along your feet and a paver so you can turn this unit upside down for a work table.

WessB · March 2008

Look in the "Tips" section of my website..linked below..

Richard Fl · March 2008

Here are some dimensions Egret posted a few years back to go with the lovely picture>

BGE, Small, Transporter, Egret

This carrier is for the 'small'. It's made from 3/4" plywood and 2X4's. The outside dimension is 20" X 20", the hole diameter is 15", and the 2X4's are 9 & 1/2" in length, which makes the overall height 11".

1 Poodlemom,
2 One thing I would do different would be to make the top piece of plywood about 20" X 26" and put a small cutout on the ends of the 26" side for handles (one on each end). It's a little awkward when two people try to pick this thing up and move it.

Recipe Type
Help

Recipe Source
Source: BGE Forum, Egret, 2006/12/03

Wasted Words · March 2008

Thanks Egret.

Small Transporter rig

Comments

Categories