DigiQ Adapter Permanent Attachment How I did it

Pickled Egg · November 2010

Below are the photos of what I did to make the adapter permanent
You will need to use JB Weld between the plates to keep it secure. Also the screen will have to go.

[/img

Smokin' not stirred · November 2010

Good idea, but where does the Rye factor in?

kricks · November 2010

Good adaptation but I guess I don't understand why the screen has to go. That is the standard outside door isn't it? And if that is outside the screen, I don't see how/why the screen would have to go since everthing you've done goes to the outside. Also, if you had a hand riveter wouldn't that work as well as JB? Just thinking... Men never can leave well enough alone you know!

Pickled Egg · November 2010

The Rye inparts patients.

Pickled Egg · November 2010

With the adapter attached the screen will not be able to by pass it.
I used JB to keep from having the rivet head on the inside thinking it might rub.
Plus the JB forms an air tight seal

RRP · November 2010

The screen goes on the inside not the outside so what Kricks meant stands correct. BTW I assume you have some type of plug to cork that adapter when not wanted.

Pickled Egg · November 2010

Yes it came with the adapter

DigiQ Adapter Permanent Attachment How I did it

Comments

Categories