Stoker Status in action

thailandjohn · October 2010

I am now cooking ribs and they should be on for another three hours

When ribs are done, I will bump up temp to 400 to do a whole chicken

Click link below to see the Stoker Status

http://010.000.001.006/index.html

The screen will refresh every 10 minutes

FL XL Egger · October 2010

The link doesn't work.

thailandjohn · October 2010

A friend of mine clicked on the lilnk from his computer and it worked....not sure what about the problem your having

Avocados · October 2010

10.0.1.6 is an IP address on the inside of your router which is not accessible across the internet.

Internet routers do not forward any 'private' network address that start in the following ranges

10.x.x.x
172.16.x.x
192.168.x.x

To access your stoker from the internet you need the public IP address on the outside of your router that is assigned by your internet provider. Then you need to configure your router to forward port 80 (http traffic) from the external port to the internal address of your stoker (10.0.1.6)

You can find your public IP address by opening a web browser and going to www.whatismyip.org

Canugghead · October 2010

that's right, but I wouldn't recommend posting that IP address, a hacker can brick your stoker :P
Gary

Avocados · October 2010

Or worse yet... they could change your pit temp and mess up your rib cook :ohmy:

Canugghead · October 2010

or both :P :silly:

Grandpas Grub · October 2010

Just tried it and the connection is timing out - can't read page.

Just got to thinking it might be a problem with folks using firefox. I will go check that and then edit here if that is the case.

{edit} IE converts the address to http://8.0.1.6/index.html FireFox tries to open the original address.

See Avocado's post below.

Kent

Stoker Status in action

Comments

Categories