Hop on down to your nearest EGG dealer this week to pick up some Easter EGGcessories! Here are a few that may be useful for Easter, the V-rack, electric charcoal lighter and flexible skewers! Now that Spring is in the air, it's time to think about getting out to one of the many #EGGfests around the country - see a list here
OK folks, I had the pleasure of being able to hook up w/ a buddy who's got his own portable saw mill. He is in the process of cutting lumber fer his cabin he's building. I was moaning about how I could not find any cedar that looked good and he said to come up and we'd cut some since he had several large trees ready fer cutting B) The table was built off the VERY VAGUE sketch green egg provided. I used 3x3 fer the legs, 1x6 fer the top deck, 1x6 and 1x4 fer the lower deck. I did use some store bought pressure treated 2x4's fer the underbracing. I used 2 boxes of 2 inch deck screws and counter sank EVERY screw. I used 1 gallon of Thompson's on the table hoping to preserve the beauty of the wood!!! It's all rough cut no plane used! I do not have any fancy table saws or what not....I used a skill saw, and a type of jig saw....I think fer a 1st attempt it was a purty good achievement and although there are a few quirks about it, most are not visible... The measurements were exact enough that I didn't need the stepping stone (feet were enough), the lid opens w/ about an inch to spare, and the hole the grill went into was narrowed to be a bit tighter. I used 2 straps and lapped em then hooked em to a metal pole so me and a friend could lower it into it's resting spot...I just like the whole idea of being involved from TREE to TABLE!!! Enjoy the pics!!! :whistle: :woohoo: :whistle:
Hunting-Fishing-Cookin' on my EGG! Nothing else compares!