Big Green Egg - EGGhead Forum - The Ultimate Cooking Experience...
Welcome to the EGGhead Forum. You can also find a lot of information, cooking tips and amazing recipes by following Big Green Egg at:

Facebook  |  Twitter  |  Instagram  |  Pinterest  |  Youtube  |  Vimeo
Share your photos by tagging us and using the hashtag #EGGhead4Life.


In Atlanta? Come visit Big Green Egg headquarters, see our new showroom and check out the History of the EGG Museum and Culinary Center!  3786 DeKalb Technology Parkway, Atlanta, GA 30340.

Expanded Metal Grate Photo's

BryanBryan Posts: 53
edited 1:10AM in EggHead Forum
expmetgrt.jpg
<p />Kemper, (and anyone else curious) [p]These are (I hope) the pictures of my Expanded Metal Grate Building Experiment. The top photo shows the grate with 5 1/4-20 bolts for legs. These stick into the throat of the firebox to prevent movement when stiring the coals and ashes.[p]The middle photo shows the firebox on it's side on the table with the grate in place. The bolts hold it in good although I can't imagine why it would be important to hold in at this angle.[p]The bottom is another view of the legs of the grate.[p]I hope this helps those curious about the grate setup I posted earlier. [p]I haven't tried it with a trivet yet, but I don't see why it wouldn't work. I hardly have to stir ashes out at all with this setup. Plenty of air gets through. Ashes seem to fall right through. [p]I would love to find some stainless expanded metal sometime. I believe it would last almost forever.

Comments

  • BryanBryan Posts: 53
    Picture didn't take. I'll have to try again later.[p]Bryan
  • GrumpaGrumpa Posts: 861
    EXPMETGRT.JPG
    <p />Bryan,[p]Hope you don't mind a little help. Your picture was filed using all caps so I linked it for you.

  • GfwGfw Posts: 1,598
    Bryan, I don't think the file is there - it appears to be 1k in size - the other 2 that you have are 80k and 92k. You might want to make sure that your upload took. Good luck!

  • BryanBryan Posts: 53
    Thanks Bob,[p]I finally figured it out on my end. Hard to believe a little machine such as this can be so picky about spelling.[p]Bryan

  • BryanBryan Posts: 53
    Gfw,[p]Thanks, I fixed it. Take a look now.[p]Bryan

  • BryanBryan Posts: 53
    Me again,
    Sorry about the miscount. 6 bolts instead of 5.[p]Bryan

  • GfwGfw Posts: 1,598
    Bryan, pics look great - maybe you should start a little side business! I have to look into what you accomplished for my BGE.

  • Bryan, my buddy's middle name is Stainless. Great pics. My buddy owns a metal fab shop. I was going to see him today to find out what he has that would hold up to extreem heat. "Boiler-Plate comes to mind, but he's the one that cut my small mesh expanded metal cooking grate. It's my pride and joy.... He has stainless stuff like this in the trash bin. I had a very hot pre-fire going tonight and I could actually see my ceramic grate glowing in the inferno. It takes a lot of punishment. He does boiler replacements and everything else relating to industrial hell. I'm going to see him tomorrow. We may come up with something. He's a metalurgist of sorts,, so I will let yall know what he thinks. You know,,,,, titanium gets harder when heated! HUMMMMMMMM!

  • King-O-Coals, Titanium, huh? I've got these golf clubs
    I could melt down.....

  • Tim MTim M Posts: 2,410
    Bryan ,
    Its probably not your machine but rather the server your storing the pictures on. Many run Unix which is case sensitive(much like the minds of teenagers). ABC is not the same as abc --- go figure? [p]Tim -- Brant loves Unix, Brant loves Unix

  • BryanBryan Posts: 53
    Tim M,[p]That was it.[p]Thanks
  • KamperKamper Posts: 41
    Bryan,[p]Thanks for the photos of your setup...I've just completed something similar but without the bolts. Wish I had seen your idea first, I like the anti-shift device/bolts! I simply cut some stainless expanded metal from a waste piece and added a stainless ring to the outside edge to give it some "heft" I have access to metal shears and welding equip and love stupid projects like this, so I have a lot more into it than is required, but that's half the fun, isn't it?

Sign In or Register to comment.
Click here for Forum Use Guidelines.