Big Green Egg - EGGhead Forum - The Ultimate Cooking Experience...
We hope you all had a big green St. Patrick’s Day! While you’re waiting for it to be Easter time, try some of the new recipes we’ve recently added to our website. One of our favorite dishes is the Easy Jambalaya with Beef, and our favorite sweet & savory treat is the Sweet Cream Crostini.

The Big Green Egg headquarters has moved - come visit our new location and check out the museum! 3786 DeKalb Technology Parkway, Atlanta, GA 30340

Making Table for BGE Large

Pork ButtPork Butt Posts: 95
edited November -1 in EggHead Forum
My question is what type of wood can I use to build a table? I live in Florida if that helps. Are there any sugestions on a table and is there any web sites besides the one here on a table? [p]Thanks Pork Butt
·

Comments

  • HaggisHaggis Posts: 998
    Pork Butt,[p]The Naked Whiz has both photos of tables and a blow by blow of how he built his own.[p]
    [ul][li]The Whiz [/ul]
    ·
  • Pork Butt,
    Use any wood you see used for decks or other outdoor furniture.

    ·
  • Haggis,
    I had been poking around the Whiz's website and was checking out the tables and was going to ask the same question.

    ·
  • Pork Butt,[p] The tables that BGE and their dealers sell are made of Cypress wood. I personally don't know but have been told that cypress weathers and resists water and elements well.[p] I ordered one and stained it last night, next I am going to do 3 coats of Spar urethane for protection.
    ·
  • CurlyCurly Posts: 46
    Pork Butt,[p]Treated lumber is cheap.
    ·
  • jake42jake42 Posts: 930
    Table6.jpg
    <p />Pork Butt,
    I use treated lumber.

    ·
  • Pork Butt,
    I used cedar. It was a little pricey, but it looks good and weathers well. I treated it with a couple of coats of Thompson's Water Seal. I also keep it under a cover. It's two years old and still looks new.

    ·
  • Good choice on the urathane. I tried spar varnish first but was never happy with it. Three coats of urathane on my last table top is working well.[p]Ol' Spiff
    ·
  • fishlessmanfishlessman Posts: 16,624
    Pork Butt,
    out by the lake up here in new england i have teak, mahogany, white pine, fur, and treated lumber. the teak and mahogany stand up real well, the pine, fur, and treated stuff doesnt near the water. my vote would be for the mahogany treated with a sealer.

    ·
  • Pork Butt,[p]I was worried about the arsenic used to 'treat' lumber for deck/fence construction being near my food. so, my choices were quite a bit limited to the 'untreated' wood available at the local lowes. I opted to use cedar since it came in workable dimensions and would be a good looking wood once oiled. I didnt spend any more for it than i would have on treated lumber...and i dont worry about poison leaching from it.[p]
    Turned out pretty nice, and I built it for under $150...including the wheels:
    130807861-M.jpg[p]

    ·
  • jake42,[p]Watch out for treated wood and food contact as the wood is treated with an arsenic based compound. Expensive but nice is Trex, and engineered wood.
    [ul][li]Trex Here[/ul]
    ·
  • 100_1392.jpg
    <p />Pork Butt, The first table I built was out of treated decking. Then I found a Cypress table and used Ipe (Ironwood) decking shorts for this top. I'm planning to add fold away tables on each side.[p]
    ·
  • swamprb,[p]I like what you've done with the top. Looks classy.[p]Now, the idea for the fold down tables got me thinkin. I have some cedar left over from mine and I bet i could put a couple tables together almost as quick as my son reachin for that last bbq rib....tiger fast.[p]
    thanks for the tip.

    ·
  • RRPRRP Posts: 14,651
    swamprb,
    These brackets make mounting a fold down side a real snap. I recall they ran about $12 for the two from Woodcraft and hold like 140 pounds.
    IMG_0627.jpg


    and here in down mode. BTW that is just an inexpensive maple cutting board I bought from Bath Bath & Beyond.
    IMG_0626.jpg


    Ron
    Dunlap, IL
    ·
  • GolfnutGolfnut Posts: 135
    <a href=
    <p />Pork Butt,
    My table is all cedar.

    ·
  • GolfnutGolfnut Posts: 135
    gadgetman,
    Try that again.[p]IMG_1009.jpg

    ·
  • Homebrew,
    I think if you will check they made them take the arsenic out or treated wood a few years ago.

    ·
  • phreakingeek,
    I noticed you just have the little green feet under your egg in the picture. I have seen pictures of tables that have caught fire with this set up. Most guys have a barrier between the egg and the wood. Nice table, I'd hate to see it get ruined. Just a thought, Bucky

    ·
  • Bucky Buckshot,
    Yep, a few days ago when i took that pic i was still using just the BGE feet. My order for a platesetter and pizza stone came in yesterday and i instanly took my firebricks out of the egg and placed them under it. [p]I heeded the warnings and did it up right...i'll update my pics so some other new guys wont take my old setup as gospel and copy that 'fire waiting to happen' configuration.[p]thanks for the heads up,

    ·
  • RRP, Thats what I'm thinking! I may have to check those out, they look a lot sturdier than the ones I had in mind. And they look very good in either position, nice job and thanks for the tip!
    Brian

    ·
  • RRPRRP Posts: 14,651
    swamprb, you're welcome. BTW here is more info and I see I stand corrected about the weight capacity, but 130 pounds isn't bad either! Don't sit on it, but most anything you're going to be egging will be under the 130 pound capacity.

    [ul][li]Woodcraft hinge info[/ul]
    Ron
    Dunlap, IL
    ·
Sign In or Register to comment.