Welcome to the EGGhead Forum - a great place to visit and packed with tips and EGGspert advice! You can also join the conversation and get more information and amazing kamado recipes by following Big Green Egg to Experience our World of Flavor™ at:
Want to see how the EGG is made? Click to Watch
Facebook | Twitter | Instagram | Pinterest | Youtube | Vimeo
Share your photos by tagging us and using the hashtag #BigGreenEgg.
Share your photos by tagging us and using the hashtag #BigGreenEgg.
Want to see how the EGG is made? Click to Watch
Is removing lid a must to place Rutland gasket?
Options
Gravytrain84
Posts: 322
I will do it if it required but I am worried about realigning issues
Comments
-
No, there's no reason to do so.LBGE (still waitin' for my free T-Shirt), DIgiQ DX2 (In Blue, cause it's the fastest), Heavy Duty Kick Ash Basket, Mc Farland, WI.
If it wasn't for my BGE I'd have no use for my backyard... -
No it's not. But you'll likely have to loosen it and reset the seal afterward. Calling @RRPSlumming it in Aiken, SC.
-
No, but some find it easier to apply in a uniform thickness and following the curvature of the base.Re-gasketing America one yard at a time.
-
-
Ron's instructions are easy to follow. I've done 3 now. All have gone on the base - never tried to apply to the dome.Phoenix -
F**k taking off the lid and all that.
Kansas City, Missouri
Large Egg
Mini Egg
"All we have to decide is what to do with the time that is given to us" - Gandalf -
Here's a fine example of what I meant about "a uniform thickness and following the curvature".RRP said:No, but some find it easier to apply in a uniform thickness and following the curvature of the base.
http://eggheadforum.com/discussion/1202124/rutland-gasket
Re-gasketing America one yard at a time. -
Then there is the option of not replacing the gasket. I haven't had a gasket on mine for years.
Gerhard -
This is option one if it works for you.gerhardk said:Then there is the option of not replacing the gasket. I haven't had a gasket on mine for years.
GerhardSandy Springs & Dawsonville Ga -
Not much of a gasket left on this one, but it still cooks fine.gerhardk said:Then there is the option of not replacing the gasket. I haven't had a gasket on mine for years.
Gerhard
They/Them
Morgantown, PA
XL BGE - S BGE - KJ Jr - HB Legacy - BS Pizza Oven - 30" Firepit - King Kooker Fryer - PR72T - WSJ - BS 17" Griddle - XXL BGE - BS SS36" Griddle - 2 Burner Gasser - Pellet Smoker -
Runnin nekkid. My L looks the same. Have Ron's Rutlands in reserve. Don't know that I'll need them.DMW said:
Not much of a gasket left on this one, but it still cooks fine.gerhardk said:Then there is the option of not replacing the gasket. I haven't had a gasket on mine for years.
GerhardSandy Springs & Dawsonville Ga -
One Large has not had a gasket in over 7 years and the Mini has not had one in over 5 years. See no reason.Salado TX & 30A FL: Egg Family: 3 Large and a very well used Mini, added a Mini Max when they came out (I'm good for now). Plus a couple Pit Boss Pellet Smokers.
-
I've probably put on 4 or 5 Rutland gaskets on the bottom only over the years. Haven't missed a meal yet, even if a little smoke leaks out here and there. Not that I've noticed that, but my motto is "If you don't mind, it doesn't matter."Judy in San Diego
-
just get with @RRP
Hardest thing about the process was driving to Wal-Mart to get the high temp sealer...
install is super easy and @RRP 's buying process is great..
Have:
XLBGE / Stumps Baby XL / Couple of Stokers (Gen 1 and Gen 3) / Blackstone 36 / Maxey 3x5 water pan hog cooker
Had:
LBGE / Lang 60D / Cookshack SM150 / Stumps Stretch / Stumps Baby
Fat Willies BBQ
Ola, Ga -
Certainly not necessary but does make it a whole lot easier.Formerly of Houston, TX - Now Located in Bastrop, TX
I work in the 'que business now (since 2017)
6 Eggs: (1) XL, (2) Large, (1) Small, (1) Minimax & (1) Mini - Egging since 2007
Also recently gained: (1) Gas Thing (came with the house), (1) 36" Blackstone Griddle & (1) Pitts & Spitts Pellet Smoker -
Love my Rutland, from @RRP, installed without removing the lid, not a problem (you just have to reach back a bit).
-
I scraped and sanded both rims to cleanness while snug in the bands. Application is silly easy. Just do it.Best - Jack
-
Not required, I've done 3 now, just follow Ron's instructions and you'll be fineNashville, TN
Medium BGE | Large BGE | Little Griddle | Kick Ash Basket | Looftlighter -
Just finished. Was quite easy but I have quite a bit of orange gasket showing. Is that normal? Will it fade to black as I cook?
-
it will get dirty and darken in time, but that also means it will harden and with "quite a bit" you may lose the cushioning affect of the gasket.Gravytrain84 said:Just finished. Was quite easy but I have quite a bit of orange gasket showing. Is that normal? Will it fade to black as I cook?Re-gasketing America one yard at a time. -
-
That pic looks good... the few other times I've changed mine out that's exactly as it looks, goes away over timeNashville, TN
Medium BGE | Large BGE | Little Griddle | Kick Ash Basket | Looftlighter -
The unraveled ends are driving me nuts but it was the best I can do. I'm pretty sure itll be air tight
-
If I were you I would carefully fill that gap with some of the Permatex you should have left over.Gravytrain84 said:The unraveled ends are driving me nuts but it was the best I can do. I'm pretty sure itll be air tight
BTW glad you posted the picture as the amount of Permatex on your gasket should not a be a problem - I thought you meant excessive!Re-gasketing America one yard at a time. -
Doesn't Big Green Egg sell gaskets
-
Why yes they do.Tspud1 said:Doesn't Big Green Egg sell gaskets
http://biggreenegg.com/product/high-performance-gasket-kits/
LBGE 2013 & MM 2014Die Hard HUSKER & BRONCO FANFlying Low & Slow in "Da Burg" FL -
They do. And they last 6 months. Rutland is a muleTspud1 said:Doesn't Big Green Egg sell gaskets -
Sounds good! I guess I was comparing my application to the last one I saw posted which was damn near perfect. Lol I will light up tomorrow and look for leaks. If that rear section leaks, I will fill with da orange.RRP said:
If I were you I would carefully fill that gap with some of the Permatex you should have left over.Gravytrain84 said:The unraveled ends are driving me nuts but it was the best I can do. I'm pretty sure itll be air tight
BTW glad you posted the picture as the amount of Permatex on your gasket should not a be a problem - I thought you meant excessive!
It it is recommended to wait 24 hr, right? -
Yes 24 hours - the Permatex hardens to the touch within 1 hour, but needs 24 hours to finish. It cures by a chemical reaction and heat does not speed it along.Gravytrain84 said:
Sounds good! I guess I was comparing my application to the last one I saw posted which was damn near perfect. Lol I will light up tomorrow and look for leaks. If that rear section leaks, I will fill with da orange.RRP said:
If I were you I would carefully fill that gap with some of the Permatex you should have left over.Gravytrain84 said:The unraveled ends are driving me nuts but it was the best I can do. I'm pretty sure itll be air tight
BTW glad you posted the picture as the amount of Permatex on your gasket should not a be a problem - I thought you meant excessive!
It it is recommended to wait 24 hr, right?Re-gasketing America one yard at a time.
Categories
- All Categories
- 182.7K EggHead Forum
- 15.7K Forum List
- 459 EGGtoberfest
- 1.9K Forum Feedback
- 10.3K Off Topic
- 2.2K EGG Table Forum
- 1 Rules & Disclaimer
- 9K Cookbook
- 12 Valentines Day
- 91 Holiday Recipes
- 223 Appetizers
- 516 Baking
- 2.4K Beef
- 88 Desserts
- 163 Lamb
- 2.4K Pork
- 1.5K Poultry
- 30 Salads and Dressings
- 320 Sauces, Rubs, Marinades
- 543 Seafood
- 175 Sides
- 121 Soups, Stews, Chilis
- 35 Vegetarian
- 100 Vegetables
- 312 Health
- 292 Weight Loss Forum