Big Green Egg - EGGhead Forum - The Ultimate Cooking Experience...
We hope you had a hoppy Easter and are ready to spring into warm weather cooking mode! There’s nothing better than spending time outdoors with the sweet aroma of fresh cooked Ribs. Baseball season is also underway, so it's the perfect time to try out some chicken wing variations! We have Jamaican Jerk, Lemon Pepper, Fired-Up Wings and even a Whiskey Onion and Chicken Steak if wings aren't your thing. Bon appetit!



Big Green Egg headquarters has moved - come visit our new showroom and check out the museum and culinary center too! 3786 DeKalb Technology Parkway, Atlanta, GA 30340

Pull the trigger on a used SBGE

2»

Comments

  • bettysnephewbettysnephew Posts: 873
    If I were to go to the work of disassembling the hinge and bands, I would have them powder coated.  Much more durable.
    See der Rabbits, Iowa
    ·
  • minniemohminniemoh Posts: 1,238
    Great find and congrats on the deal. I love my Small and use it several times per week to make veggies on fire wires. Also took it on the road last weekend so I didn't have to miss out on egging while I was gone. 
    L x2, M, S, and Mini. She says I have enough now....
    eggAddict from MN!
    ·
  • bbqlearnerbbqlearner Posts: 712
    Congrats!!!! Looking forward to seeing the SBGE cooks....I love mine btw

    Houston, TX - Buddy LBGE, Don SBGE, Tiny Mini & Shiny Momma Pitts n Spitts

    ·
  • RRPRRP Posts: 14,886
    If I were to go to the work of disassembling the hinge and bands, I would have them powder coated.  Much more durable.
    Dumb question here...where does one get powder coating done?
    Ron
    Dunlap, IL
    ·
  • FockerFocker Posts: 1,704
    Nice score.

    I personally would not consider getting a ceramic cap.  Strip and paint your DFMT with black high heat grill paint.  Rustoleum makes it, and you can find it at any big box store.  I am also waiting for someone to create a cap similar to the eggware/smokeware cap.  That will replace both ceramic cap and DFMT.  Someone here was trying to design one.  Not sure on it's progression???
    Brandon
    Quad Cities
    Hollin' bout huh, egga what!?  Huh, give a Fock egga what!?
    ·
  • RRPRRP Posts: 14,886
    edited July 2014
    +1 what @Focker just said! BTW in talking with Matt even recently from SmokeWare a cap for the small is highly unlikely at the is time due to design and production costs don't match up with perceived demand. As for the other guy making one on his own he probably discovered the same issues.

    BTW Adam, your Rutland is cut, boxed, addressed and ready to ship right after lunch.
    Ron
    Dunlap, IL
    ·
  • apinionapinion Posts: 366
    Can't wait for the gasket! Going to do the large and small at the same time.

    Pulled the for ring and box out of the small and did a clean burn with the large in it. The daisy wheel was so stuck that I had to heat up the egg to 500 and coax it with a hammer and some scrap wood. This person really never cleaned this thing.
    Louisianian by birth, Louisianian by death. Austinite for now...
    ·
  • apinionapinion Posts: 366
    Anyone have a recommendation for what to use to clean this junk off? Dawn soap?

    image


    Louisianian by birth, Louisianian by death. Austinite for now...
    ·
  • U_tardedU_tarded Posts: 1,253
    try simply green and a scotchbright sponge to lightly scrub
    ·
  • NPHuskerFLNPHuskerFL Posts: 9,493
    edited August 2014
    @apinion‌ heat it up. Use a mild soap and water. Or grease lightning, simple green. The heat helps loosen it. I find it easier to clean while warm (not nuclear lol). That is how I keep my Smokeware clean too. I clean at the end while it's still piping hot. It comes clean without any real labor.

    Edit: you may need to add elbow grease to my above recommendation. But, rest assured it'll come clean. :-)
    LBGE 2012, Mini MAX 2014, SS Table and Stoker
    Die Hard HUSKER & BRONCO FAN
    Middleburg, FL
    ·
  • Nice result all round, congrats. How often should one 'clean burn'? What does it entail. Thanks.
    Bronxville, New York. XLBGE, MBGE
    ·
  • apinionapinion Posts: 366
    I clean burn is on an as needed basis. I did it to this one because I bought it used and wanted anything he cooked gone.

    You can also do a clean burn whenever you feel it necessary if you get too much grease, etc.
    Louisianian by birth, Louisianian by death. Austinite for now...
    ·
  • RRP said:
    If I were to go to the work of disassembling the hinge and bands, I would have them powder coated.  Much more durable.
    Dumb question here...where does one get powder coating done?

    Sorry I missed that Ron,  Check local listings for painting and coatings.

    See der Rabbits, Iowa
    ·
  • thetrimthetrim Posts: 942
    I had a chance to get a small for $300 and am still kicking myself that I tried to get it for $50-100 off and walked....
    =======================================
    XL 6/06, Mini 6/12, L 10/12, Mini #2 12/14
    Tampa Bay, FL
    ·
Sign In or Register to comment.