Big Green Egg - EGGhead Forum - The Ultimate Cooking Experience...
It doesn’t get much hotter than the EGG cookin’ in July! Make sure to keep yourself hydrated with a bit of whatever you’re using for the Beer Can Chicken. Ice Cream Sandwiches are also a great way to stay cool. Looking for some great ideas for a summer cook out? Try out a Pimento Cheeseburger or Dr. BBQ’s Spare Rib Surprise. Just don’t be surprised if your neighbors stop by for a quick bite when they smell what you’re cooking!

Big Green Egg headquarters has moved - come visit our new showroom and check out the museum and culinary center too! 3786 DeKalb Technology Parkway, Atlanta, GA 30340

gasket mishap

krobertsmsnkrobertsmsn Posts: 548
edited January 2014 in EggHead Forum
:( :((


LBGE 4/2012, MBGE 6/2012 & Mini 11/2013
Rome, GA
·

Comments

  • Oops!
    Alan in LA (Lower Alabama that is)
    "If you must choose between two evils, pick the one you've never tried before!" 
    ·
  • Is this covered under warranty? Did a pork butt 225-250 21/2 hrs, then 350ish the remaining time. Dome temp jumped to 450 at one point BRIEFLY, after I tweaked temp too much.    :((
    LBGE 4/2012, MBGE 6/2012 & Mini 11/2013
    Rome, GA
    ·
  • EggcelsiorEggcelsior Posts: 11,403
    As I stated in the other post, yes, if under 1 year.
    ·
  • Carolina QCarolina Q Posts: 8,470
    Don't waste your time with a BGE gasket, free or not. You will fry that one too. Get some Rutland gasket material, 5/8" wide, flat ribbon, not rope. RRP sells it with instructions. Also,get some Permatex Ultra Copper for the adhesive. Comes in a tube from any hardware or auto parts store. Mine is over 4 years old and has been thru many pizza cooks, some as high as 900° (not a typo). It's a little dirty now, but otherwise, good as new. RRP's is even older than mine. Oh, and it only has to be installed on the base or top, not both.

    This pic is fairly recent...
    image
    Michael 
    Central Connecticut 

    ·
  • Thank you!
    LBGE 4/2012, MBGE 6/2012 & Mini 11/2013
    Rome, GA
    ·
  • dihtndihtn Posts: 177

    Don't waste your time with a BGE gasket, free or not. You will fry that one too. Get some Rutland gasket material, 5/8" wide, flat ribbon, not rope. RRP sells it with instructions. Also,get some Permatex Ultra Copper for the adhesive. Comes in a tube from any hardware or auto parts store. Mine is over 4 years old and has been thru many pizza cooks, some as high as 900° (not a typo). It's a little dirty now, but otherwise, good as new. RRP's is even older than mine. Oh, and it only has to be installed on the base or top, not both.


    This pic is fairly recent...
    image
    Are these difficult to install?

    ·
  • bud812bud812 Posts: 1,438
    dihtn said:
    Don't waste your time with a BGE gasket, free or not. You will fry that one too. Get some Rutland gasket material, 5/8" wide, flat ribbon, not rope. RRP sells it with instructions. Also,get some Permatex Ultra Copper for the adhesive. Comes in a tube from any hardware or auto parts store. Mine is over 4 years old and has been thru many pizza cooks, some as high as 900° (not a typo). It's a little dirty now, but otherwise, good as new. RRP's is even older than mine. Oh, and it only has to be installed on the base or top, not both.

    This pic is fairly recent...
    image
    Are these difficult to install?
    No, it's a piece of cake to put on.

    Not to get technical, but according to chemistry alcohol is a solution...

    Large & Small BGE

    Stockton Ca.

    ·
  • Carolina QCarolina Q Posts: 8,470
    Nope. Plus Ron sends instructions.


    Michael 
    Central Connecticut 

    ·
  • jaydub58jaydub58 Posts: 1,684
    I followed RRP's instructions to install one on my large; if I can, you can!
    ;)
    John in the Willamette Valley of Oregon
    ·
  • ZumaZuma Posts: 42
    Who do I contact to get this Rutland gasket?  Ron has instructions?  Website or phone no.?  Thanks in advance.  
    ·
  • shtgunal3shtgunal3 Posts: 2,902
    @RRP on this forum

    ___________________________________

     

     LBGE,SBGE, and a mini makes three......Sweet home Alabama........ Stay thirsty my friends .

    ·
  • RRPRRP Posts: 15,834
    shtgunal3 said:
    @RRP on this forum
    Thanks shtgunal3 and CarolinaQ! I have already heard from and replied to Zuma!
    Ron
    Dunlap, IL
    ·
  • @RRP Please share how I obtain this please. TIA

    Others may also want one, otherwise I would have PM you.
    LBGE 4/2012, MBGE 6/2012 & Mini 11/2013
    Rome, GA
    ·
  • Carolina QCarolina Q Posts: 8,470
    That is how you get one. PM Ron. :)
    Michael 
    Central Connecticut 

    ·
  • RRPRRP Posts: 15,834
    @RRP Please share how I obtain this please. TIA

    Others may also want one, otherwise I would have PM you.

    I reply to all PM sent me via this forum, but if you wish to contact me direct then my email with the spaces removed of course is: r o n . p a t @ c o m c a s t . n e t Note the dot between the n and p there is somebody somewhere who has the identical address except without that dot. My reply to all initial contacts consists of what you will get, what the prices are and a general description of what the process entails. Then if my not for profit offer is acceptable we have another conversation and I ship the next day and that shipment includes a 2 paged detailed set of instructions and hints. BTW I have been doing this since 2002.
    Ron
    Dunlap, IL
    ·
  • jaydub58jaydub58 Posts: 1,684
    Yep, @RRP is da man!  I have his Rutland on my large, and it's great.
    John in the Willamette Valley of Oregon
    ·
  • RRPRRP Posts: 15,834
    jaydub58 said:
    Yep, @RRP is da man!  I have his Rutland on my large, and it's great.
    LOL - thanks man...I try...and I'm just 10 away from 1,000 gaskets sold as a not for profit service.
    Ron
    Dunlap, IL
    ·
  • krobertsmsnkrobertsmsn Posts: 548
    edited January 2014
    Just ordered for all 3 eggs...Thanks for this service Ron!
    LBGE 4/2012, MBGE 6/2012 & Mini 11/2013
    Rome, GA
    ·
Sign In or Register to comment.